SCSI problem with aic79xx, ahd driver
Joop Boonen
joop_boonen at web.de
Wed Dec 3 07:30:18 PST 2003
Dear all,
I have the following question. We're using curuently FreeBSD 4.7 in our company, we wil l soon more to 4.9. We saw that with FReeBSD 4.7 the driver didn't work at all. With 4.9 it worked but we get quite a few errors, in de dmesg.
Can you please help us to solve this problem, or can you tell we we can solve this problem.
Regards,
Joop.
______________________________________________________________________________
WEB.DE FreeMail wird 5 Jahre jung! Feiern Sie mit uns und
nutzen Sie die neuen Funktionen http://f.web.de/features/?mc=021130
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Tue Nov 25 11:29:49 CET 2003
boonen at simon.fw.ao-srv.com:/home/boonen/work/firewall/FreeBSD/sys-4.9/compile/FILTER
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2400096868 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2400.10-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536870912 (524288K bytes)
avail memory = 519249920 (507080K bytes)
Preloaded elf kernel "kernel" at 0xc033d000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 16 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 4.0
pci0: <unknown card> (vendor=0x110a, dev=0x007b) at 8.0 irq 11
pci0: <unknown card> (vendor=0x110a, dev=0x007c) at 8.1 irq 11
pci0: <unknown card> (vendor=0x110a, dev=0x007d) at 8.2
pci0: <Unknown PCI ATA controller> at 15.1
pci0: <OHCI USB controller> at 15.2 irq 9
isab0: <PCI to ISA bridge (vendor=1166 device=0227)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib8: <PCI to PCI bridge (vendor=8086 device=b154)> at device 11.0 on pci1
pci2: <PCI bus> on pcib8
sf0: <Adaptec AIC-6915 10/100BaseTX> port 0x2000-0x20ff mem 0xfc400000-0xfc47ffff irq 10 at device 4.0 on pci2
sf0: Ethernet address: 00:00:d1:f0:3f:81
miibus0: <MII bus> on sf0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf1: <Adaptec AIC-6915 10/100BaseTX> port 0x2400-0x24ff mem 0xfc480000-0xfc4fffff irq 5 at device 5.0 on pci2
sf1: Ethernet address: 00:00:d1:f0:3f:82
miibus1: <MII bus> on sf1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf2: <Adaptec AIC-6915 10/100BaseTX> port 0x2800-0x28ff mem 0xfc500000-0xfc57ffff irq 12 at device 6.0 on pci2
sf2: Ethernet address: 00:00:d1:f0:3f:83
miibus2: <MII bus> on sf2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf3: <Adaptec AIC-6915 10/100BaseTX> port 0x2c00-0x2cff mem 0xfc580000-0xfc5fffff irq 9 at device 7.0 on pci2
sf3: Ethernet address: 00:00:d1:f0:3f:84
miibus3: <MII bus> on sf3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib9: <PCI to PCI bridge (vendor=8086 device=b154)> at device 12.0 on pci1
pci3: <PCI bus> on pcib9
sf4: <Adaptec AIC-6915 10/100BaseTX> port 0x3000-0x30ff mem 0xfc600000-0xfc67ffff irq 5 at device 4.0 on pci3
sf4: Ethernet address: 00:00:d1:f0:40:95
miibus4: <MII bus> on sf4
ukphy4: <Generic IEEE 802.3u media interface> on miibus4
ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf5: <Adaptec AIC-6915 10/100BaseTX> port 0x3400-0x34ff mem 0xfc680000-0xfc6fffff irq 12 at device 5.0 on pci3
sf5: Ethernet address: 00:00:d1:f0:40:96
miibus5: <MII bus> on sf5
ukphy5: <Generic IEEE 802.3u media interface> on miibus5
ukphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf6: <Adaptec AIC-6915 10/100BaseTX> port 0x3800-0x38ff mem 0xfc700000-0xfc77ffff irq 9 at device 6.0 on pci3
sf6: Ethernet address: 00:00:d1:f0:40:97
miibus6: <MII bus> on sf6
ukphy6: <Generic IEEE 802.3u media interface> on miibus6
ukphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf7: <Adaptec AIC-6915 10/100BaseTX> port 0x3c00-0x3cff mem 0xfc780000-0xfc7fffff irq 10 at device 7.0 on pci3
sf7: Ethernet address: 00:00:d1:f0:40:98
miibus7: <MII bus> on sf7
ukphy7: <Generic IEEE 802.3u media interface> on miibus7
ukphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfca00000-0xfca0ffff,0xfca10000-0xfca1ffff irq 11 at device 0.0 on pci4
bge0: Ethernet address: 00:30:05:2f:b2:df
miibus8: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfca20000-0xfca2ffff,0xfca30000-0xfca3ffff irq 12 at device 0.1 on pci4
bge1: Ethernet address: 00:30:05:2f:b2:e0
miibus9: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus9
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pcib3: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib3
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfce00000-0xfce01fff irq 9 at device 4.0 on pci5
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfce02000-0xfce03fff irq 11 at device 4.1 on pci5
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pcib4: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib4
pcib5: <Host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib5
pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci8: <PCI bus> on pcib6
pcib7: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci9: <PCI bus> on pcib7
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 2
eisa0: unknown card @@@0000 (0x00000000) at slot 3
eisa0: unknown card @@@0000 (0x00000000) at slot 4
orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xd3000-0xd57ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x71 Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x30] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
qinstart = 0 qinfifonext = 0
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0x6c]
CCSCBCTL[0x0]
ahd1: REG0 == 0x1, SINDEX = 0x22, DINDEX = 0x0
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x15 0x8 0x7 0x6 0x5 0x4 0x3 0x29
>>>>>>>>>>>>>>>>>
ahd1: Signaled Target Abort
IP Filter: v3.4.32 initialized. Default = block all, Logging = enabled
Waiting 8 seconds for SCSI devices to settle
pass2 at ahd0 bus 0 target 8 lun 0
pass2: <SDR GEM318 0> Fixed Processor SCSI-2 device
pass2: 3.300MB/s transfers
da0 at ahd0 bus 0 target 1 lun 0
da0: <FUJITSU MAP3367NC 5207> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 35046MB (71775284 512 byte sectors: 255H 63S/T 4467C)
da1 at ahd0 bus 0 target 2 lun 0
da1: <FUJITSU MAP3367NC 5207> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 35046MB (71775284 512 byte sectors: 255H 63S/T 4467C)
Mounting root from ufs:/dev/da1s1a
-------------- next part --------------
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE-p9 #0: Mon Nov 24 10:39:01 CET 2003
boonen at tita.fw.ao-srv.com:/home1/boonen/work/firewall/FreeBSD/sys-4.7/compile/BOOTCD
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2400095552 Hz
CPU: Pentium 4 (2400.10-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC,<b31>>
real memory = 536870912 (524288K bytes)
avail memory = 452767744 (442156K bytes)
Preloaded elf kernel "kernel" at 0xc4297000.
Preloaded mfs_root "/fs.BOOTFLOP" at 0xc4297084.
Pentium Pro MTRR support enabled
md0: Preloaded image </fs.BOOTFLOP> 67107840 bytes at 0xc0295a2c
md1: Malloc disk
Using $PIR table, 16 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 4.0
pci0: <unknown card> (vendor=0x110a, dev=0x007b) at 8.0 irq 11
pci0: <unknown card> (vendor=0x110a, dev=0x007c) at 8.1 irq 11
pci0: <unknown card> (vendor=0x110a, dev=0x007d) at 8.2
atapci0: <Generic PCI ATA controller> port 0x1c00-0x1c0f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> at 15.2 irq 9
isab0: <PCI to ISA bridge (vendor=1166 device=0227)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib8: <PCI to PCI bridge (vendor=8086 device=b154)> at device 11.0 on pci1
pci2: <PCI bus> on pcib8
sf0: <Adaptec AIC-6915 10/100BaseTX> port 0x2000-0x20ff mem 0xfc400000-0xfc47ffff irq 10 at device 4.0 on pci2
sf0: Ethernet address: 00:00:d1:f0:3f:81
miibus0: <MII bus> on sf0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf1: <Adaptec AIC-6915 10/100BaseTX> port 0x2400-0x24ff mem 0xfc480000-0xfc4fffff irq 5 at device 5.0 on pci2
sf1: Ethernet address: 00:00:d1:f0:3f:82
miibus1: <MII bus> on sf1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf2: <Adaptec AIC-6915 10/100BaseTX> port 0x2800-0x28ff mem 0xfc500000-0xfc57ffff irq 12 at device 6.0 on pci2
sf2: Ethernet address: 00:00:d1:f0:3f:83
miibus2: <MII bus> on sf2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf3: <Adaptec AIC-6915 10/100BaseTX> port 0x2c00-0x2cff mem 0xfc580000-0xfc5fffff irq 9 at device 7.0 on pci2
sf3: Ethernet address: 00:00:d1:f0:3f:84
miibus3: <MII bus> on sf3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib9: <PCI to PCI bridge (vendor=8086 device=b154)> at device 12.0 on pci1
pci3: <PCI bus> on pcib9
sf4: <Adaptec AIC-6915 10/100BaseTX> port 0x3000-0x30ff mem 0xfc600000-0xfc67ffff irq 5 at device 4.0 on pci3
sf4: Ethernet address: 00:00:d1:f0:40:95
miibus4: <MII bus> on sf4
ukphy4: <Generic IEEE 802.3u media interface> on miibus4
ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf5: <Adaptec AIC-6915 10/100BaseTX> port 0x3400-0x34ff mem 0xfc680000-0xfc6fffff irq 12 at device 5.0 on pci3
sf5: Ethernet address: 00:00:d1:f0:40:96
miibus5: <MII bus> on sf5
ukphy5: <Generic IEEE 802.3u media interface> on miibus5
ukphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf6: <Adaptec AIC-6915 10/100BaseTX> port 0x3800-0x38ff mem 0xfc700000-0xfc77ffff irq 9 at device 6.0 on pci3
sf6: Ethernet address: 00:00:d1:f0:40:97
miibus6: <MII bus> on sf6
ukphy6: <Generic IEEE 802.3u media interface> on miibus6
ukphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf7: <Adaptec AIC-6915 10/100BaseTX> port 0x3c00-0x3cff mem 0xfc780000-0xfc7fffff irq 10 at device 7.0 on pci3
sf7: Ethernet address: 00:00:d1:f0:40:98
miibus7: <MII bus> on sf7
ukphy7: <Generic IEEE 802.3u media interface> on miibus7
ukphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib2
pci4: <unknown card> (vendor=0x14e4, dev=0x1648) at 0.0 irq 11
pci4: <unknown card> (vendor=0x14e4, dev=0x1648) at 0.1 irq 12
pcib3: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib3
ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfce00000-0xfce01fff irq 9 at device 4.0 on pci5
ahd0: WARNING - Failed chip reset! Trying to initialize anyway.
ahd0: Primary Auto-Term Sensing failed! Using Defaults.
ahd0: Secondary Auto-Term Sensing failed! Using Defaults.
ahd0: Unable to set termination settings!
ahd0: No SCB space found
device_probe_and_attach: ahd0 attach returned 12
ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfce02000-0xfce03fff irq 11 at device 4.1 on pci5
ahd0: WARNING - Failed chip reset! Trying to initialize anyway.
ahd0: Primary Auto-Term Sensing failed! Using Defaults.
ahd0: Secondary Auto-Term Sensing failed! Using Defaults.
ahd0: Unable to set termination settings!
ahd0: No SCB space found
device_probe_and_attach: ahd0 attach returned 12
pcib4: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib4
pcib5: <Host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib5
pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci8: <PCI bus> on pcib6
pcib7: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci9: <PCI bus> on pcib7
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 2
eisa0: unknown card @@@0000 (0x00000000) at slot 3
orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xd3000-0xd57ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
acd0: CDROM <SR244W> at ata1-master PIO4
Mounting root from ufs:/dev/md0c
ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfce00000-0xfce01fff irq 9 at device 4.0 on pci5
ahd0: WARNING - Failed chip reset! Trying to initialize anyway.
ahd0: Primary Auto-Term Sensing failed! Using Defaults.
ahd0: Secondary Auto-Term Sensing failed! Using Defaults.
ahd0: Unable to set termination settings!
ahd0: No SCB space found
device_probe_and_attach: ahd0 attach returned 12
ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfce02000-0xfce03fff irq 11 at device 4.1 on pci5
ahd0: WARNING - Failed chip reset! Trying to initialize anyway.
ahd0: Primary Auto-Term Sensing failed! Using Defaults.
ahd0: Secondary Auto-Term Sensing failed! Using Defaults.
ahd0: Unable to set termination settings!
ahd0: No SCB space found
device_probe_and_attach: ahd0 attach returned 12
<118>hostname bootcd.fw.ao-srv.com
<118>/usr/libexec/elf/strings:
<118>/tmp/bootsector: No such file or directory
<118>Unable to determine what the current bootdisk is.
<118>FreeBSD will be installed on the first disk.
<118>
<118> Do you want to continue ? (y/N)?
<118> Do you want to configure the network? (Y/n)?
<118>Not continuing.
<118>Enter full pathname of shell or RETURN for /bin/sh:
<118>#
<118>Copyright (c) 1992-2002 The FreeBSD Project.
<118>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
<118> The Regents of the University of California. All rights reserved.
<118>FreeBSD 4.7-RELEASE-p9 #0: Mon Nov 24 10:39:01 CET 2003
<118> boonen at tita.fw.ao-srv.com:/home1/boonen/work/firewall/FreeBSD/sys-4.7/compile/BOOTCD
<118>Timecounter "i8254" frequency 1193182 Hz
<118>Timecounter "TSC" frequency 2400095552 Hz
<118>CPU: Pentium 4 (2400.10-MHz 686-class CPU)
<118> Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
<118> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC,<b31>>
<118>real memory = 536870912 (524288K bytes)
<118>avail memory = 452767744 (442156K bytes)
<118>Preloaded elf kernel "kernel" at 0xc4297000.
<118>Preloaded mfs_root "/fs.BOOTFLOP" at 0xc4297084.
<118>Pentium Pro MTRR support enabled
<118>md0: Preloaded image </fs.BOOTFLOP> 67107840 bytes at 0xc0295a2c
<118>md1: Malloc disk
<118>Using $PIR table, 16 entries at 0xc00fdec0
<118>npx0: <math processor> on motherboard
<118>npx0: INT 16 interface
<118>pcib0: <Host to PCI bridge> on motherboard
<118>pci0: <PCI bus> on pcib0
<118>pci0: <ATI Mach64-GR graphics accelerator> at 4.0
<118>pci0: <unknown card> (vendor=0x110a, dev=0x007b) at 8.0 irq 11
<118>pci0: <unknown card> (vendor=0x110a, dev=0x007c) at 8.1 irq 11
<118>pci0: <unknown card> (vendor=0x110a, dev=0x007d) at 8.2
<118>atapci0: <Generic PCI ATA controller> port 0x1c00-0x1c0f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
<118>ata0: at 0x1f0 irq 14 on atapci0
<118>ata1: at 0x170 irq 15 on atapci0
<118>pci0: <OHCI USB controller> at 15.2 irq 9
<118>isab0: <PCI to ISA bridge (vendor=1166 device=0227)> at device 15.3 on pci0
<118>isa0: <ISA bus> on isab0
<118>pcib1: <Host to PCI bridge> on motherboard
<118>pci1: <PCI bus> on pcib1
<118>pcib8: <PCI to PCI bridge (vendor=8086 device=b154)> at device 11.0 on pci1
<118>pci2: <PCI bus> on pcib8
<118>sf0: <Adaptec AIC-6915 10/100BaseTX> port 0x2000-0x20ff mem 0xfc400000-0xfc47ffff irq 10 at device 4.0 on pci2
<118>sf0: Ethernet address: 00:00:d1:f0:3f:81
<118>miibus0: <MII bus> on sf0
<118>ukphy0: <Generic IEEE 802.3u media interface> on miibus0
<118>ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
<118>sf1: <Adaptec AIC-6915 10/100BaseTX> port 0x2400-0x24ff mem 0xfc480000-0xfc4fffff irq 5 at device 5.0 on pci2
<118>sf1: Ethernet address: 00:00:d1:f0:3f:82
<118>miibus1: <MII bus> on sf1
<118>ukphy1: <Generic IEEE 802.3u media interface> on miibus1
<118>ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
<118>sf2: <Adaptec AIC-6915 10/100BaseTX> port 0x2800-0x28ff mem 0xfc500000-0xfc57ffff irq 12 at device 6.0 on pci2
<118>sf2: Ethernet address: 00:00:d1:f0:3f:83
<118>miibus2: <MII bus> on sf2
<118>ukphy2: <Generic IEEE 802.3u media interface> on miibus2
<118>ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
<118>sf3: <Adaptec AIC-6915 10/100BaseTX> port 0x2c00-0x2cff mem 0xfc580000-0xfc5fffff irq 9 at device 7.0 on pci2
<118>sf3: Ethernet address: 00:00:d1:f0:3f:84
<118>miibus3: <MII bus> on sf3
<118>ukphy3: <Generic IEEE 802.3u media interface> on miibus3
<118>ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
<118>pcib9: <PCI to PCI bridge (vendor=8086 device=b154)> at device 12.0 on pci1
<118>pci3: <PCI bus> on pcib9
<118>sf4: <Adaptec AIC-6915 10/100BaseTX> port 0x3000-0x30ff mem 0xfc600000-0xfc67ffff irq 5 at device 4.0 on pci3
<118>sf4: Ethernet address: 00:00:d1:f0:40:95
<118>miibus4: <MII bus> on sf4
<118>ukphy4: <Generic IEEE 802.3u media interface> on miibus4
<118>ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
<118>sf5: <Adaptec AIC-6915 10/100BaseTX> port 0x3400-0x34ff mem 0xfc680000-0xfc6fffff irq 12 at device 5.0 on pci3
<118>sf5: Ethernet address: 00:00:d1:f0:40:96
<118>miibus5: <MII bus> on sf5
<118>ukphy5: <Generic IEEE 802.3u media interface> on miibus5
<118>ukphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
<118>sf6: <Adaptec AIC-6915 10/100BaseTX> port 0x3800-0x38ff mem 0xfc700000-0xfc77ffff irq 9 at device 6.0 on pci3
<118>sf6: Ethernet address: 00:00:d1:f0:40:97
<118>miibus6: <MII bus> on sf6
<118>ukphy6: <Generic IEEE 802.3u media interface> on miibus6
<118>ukphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
<118>sf7: <Adaptec AIC-6915 10/100BaseTX> port 0x3c00-0x3cff mem 0xfc780000-0xfc7fffff irq 10 at device 7.0 on pci3
<118>sf7: Ethernet address: 00:00:d1:f0:40:98
<118>miibus7: <MII bus> on sf7
<118>ukphy7: <Generic IEEE 802.3u media interface> on miibus7
<118>ukphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
<118>pcib2: <Host to PCI bridge> on motherboard
<118>pci4: <PCI bus> on pcib2
<118>pci4: <unknown card> (vendor=0x14e4, dev=0x1648) at 0.0 irq 11
<118>pci4: <unknown card> (vendor=0x14e4, dev=0x1648) at 0.1 irq 12
<118>pcib3: <Host to PCI bridge> on motherboard
<118>pci5: <PCI bus> on pcib3
<118>ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfce00000-0xfce01fff irq 9 at device 4.0 on pci5
<118>ahd0: WARNING - Failed chip reset! Trying to initialize anyway.
<118>ahd0: Primary Auto-Term Sensing failed! Using Defaults.
<118>ahd0: Secondary Auto-Term Sensing failed! Using Defaults.
<118>ahd0: Unable to set termination settings!
<118>ahd0: No SCB space found
<118>device_probe_and_attach: ahd0 attach returned 12
<118>ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfce02000-0xfce03fff irq 11 at device 4.1 on pci5
<118>ahd0: WARNING - Failed chip reset! Trying to initialize anyway.
<118>ahd0: Primary Auto-Term Sensing failed! Using Defaults.
<118>ahd0: Secondary Auto-Term Sensing failed! Using Defaults.
<118>ahd0: Unable to set termination settings!
<118>ahd0: No SCB space found
<118>device_probe_and_attach: ahd0 attach returned 12
<118>pcib4: <Host to PCI bridge> on motherboard
<118>pci6: <PCI bus> on pcib4
<118>pcib5: <Host to PCI bridge> on motherboard
<118>pci7: <PCI bus> on pcib5
<118>pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
<118>pci8: <PCI bus> on pcib6
<118>pcib7: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
<118>pci9: <PCI bus> on pcib7
<118>eisa0: <EISA bus> on motherboard
<118>eisa0: unknown card @@@0000 (0x00000000) at slot 2
<118>eisa0: unknown card @@@0000 (0x00000000) at slot 3
<118>orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xd3000-0xd57ff on isa0
<118>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
<118>fdc0: FIFO enabled, 8 bytes threshold
<118>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
<118>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
<118>atkbd0: <AT Keyboard> irq 1 on atkbdc0
<118>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
<118>sc0: <System console> at flags 0x100 on isa0
<118>sc0: VGA <16 virtual consoles, flags=0x300>
<118>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
<118>sio0: type 16550A
<118>acd0: CDROM <SR244W> at ata1-master PIO4
<118>Mounting root from ufs:/dev/md0c
<118>ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfce00000-0xfce01fff irq 9 at device 4.0 on pci5
<118>ahd0: WARNING - Failed chip reset! Trying to initialize anyway.
<118>ahd0: Primary Auto-Term Sensing failed! Using Defaults.
<118>ahd0: Secondary Auto-Term Sensing failed! Using Defaults.
<118>ahd0: Unable to set termination settings!
<118>ahd0: No SCB space found
<118>device_probe_and_attach: ahd0 attach returned 12
<118>ahd0: <Adaptec 7901A Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfce02000-0xfce03fff irq 11 at device 4.1 on pci5
<118>ahd0: WARNING - Failed chip reset! Trying to initialize anyway.
<118>ahd0: Primary Auto-Term Sensing failed! Using Defaults.
<118>ahd0: Secondary Auto-Term Sensing failed! Using Defaults.
<118>ahd0: Unable to set termination settings!
<118>ahd0: No SCB space found
<118>device_probe_and_attach: ahd0 attach returned 12
<118><118>hostname bootcd.fw.ao-srv.com
<118><118>/usr/libexec/elf/strings:
<118><118>/tmp/bootsector: No such file or directory
<118><118>Unable to determine what the current bootdisk is.
<118><118>FreeBSD will be installed on the first disk.
<118><118>
<118><118> Do you want to continue ? (y/N)?
<118><118> Do you want to configure the network? (Y/n)?
<118><118>Not continuing.
<118><118>Enter full pathname of shell or RETURN for /bin/sh:
<118><118>#
<118>
<118>#
<118>#
More information about the aic7xxx
mailing list