SCSI Aborting.
Bruce Tenison
btenison at rstc.cc.al.us
Tue May 4 06:28:54 PDT 1999
Hi everyone. I'm new to the list and to using this module, so please
forgive me if this has already been mentioned. We recently acquired a new
server which has
a Adaptec AIC-7890s on the motherboard with a SEAGATE ST39173LW Rev: 6246
drive and a Seagate STT20000N tape drive installed. I've been noticing the
following messages in the /var/log/messages file over the past couple of
days:
May 3 09:47:34 gate2 kernel: scsi : aborting command due to timeout : pid
20477, scsi0, channel 0, id 0, lun 0 Write (10) 00 01 09 e6 a0 00 00 80 00
May 3 10:24:51 gate2 kernel: scsi : aborting command due to timeout : pid
35325, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 f6 1d 33 00 00 80 00
May 3 10:27:33 gate2 kernel: scsi : aborting command due to timeout : pid
36091, scsi0, channel 0, id 0, lun 0 Read (6) 01 be aa 02 00
May 3 10:27:58 gate2 kernel: scsi : aborting command due to timeout : pid
37625, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 f1 15 fb 00 00 02 00
May 3 10:27:58 gate2 kernel: scsi : aborting command due to timeout : pid
37626, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 f1 0c 99 00 00 02 00
May 3 10:29:03 gate2 kernel: scsi : aborting command due to timeout : pid
46843, scsi0, channel 0, id 0, lun 0 Write (6) 00 bc 84 02 00
May 3 10:29:03 gate2 kernel: scsi : aborting command due to timeout : pid
46844, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 7e fa c7 00 00 02 00
May 3 10:29:03 gate2 kernel: scsi : aborting command due to timeout : pid
46845, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 97 fa d7 00 00 02 00
May 3 14:27:19 gate2 kernel: scsi : aborting command due to timeout : pid
37217, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 80 31 dd 00 00 20 00
May 3 14:27:19 gate2 kernel: scsi : aborting command due to timeout : pid
37218, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 80 32 1d 00 00 2c 00
May 3 14:27:19 gate2 kernel: scsi : aborting command due to timeout : pid
37219, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 80 32 8f 00 00 24 00
May 3 15:35:23 gate2 kernel: scsi : aborting command due to timeout : pid
67429, scsi0, channel 0, id 0, lun 0 Read (6) 00 00 4b 02 00
May 4 03:17:44 gate2 kernel: scsi : aborting command due to timeout : pid
99240, scsi1, channel 0, id 2, lun 0 Write (6) 01 00 00 40 00
May 4 04:05:25 gate2 kernel: scsi : aborting command due to timeout : pid
276427, scsi1, channel 0, id 2, lun 0 Write (6) 01 00 00 40 00
May 4 04:24:45 gate2 kernel: scsi : aborting command due to timeout : pid
323634, scsi1, channel 0, id 2, lun 0 Write (6) 01 00 00 40 00
May 4 04:27:45 gate2 kernel: scsi : aborting command due to timeout : pid
338359, scsi0, channel 0, id 0, lun 0 Read (10) 00 01 0e da 44 00 00 0a 00
May 4 07:43:36 gate2 kernel: scsi : aborting command due to timeout : pid
369671, scsi0, channel 0, id 0, lun 0 Read (10) 00 01 0e cb 6a 00 00 08 00
Any ideas? The machine disk I/O just locks up for a good minute during
these times. Also I noticed that sometimes (maybe unrelated) get some disk
corruption also. I'm running RH 6.0 with version 5.1.16 of the aic7xxx
driver installed.
Here's a snippet of the boot messages from /var/log/messages. If there's
anything that I can do to help, please let me know!
Thanks!
May 4 08:10:35 gate2 syslogd 1.3-3: restart.
May 4 08:10:35 gate2 syslog: syslogd startup succeeded
May 4 08:10:35 gate2 syslog: klogd startup succeeded
May 4 08:10:35 gate2 kernel: klogd 1.3-3, log source = /proc/kmsg started.
May 4 08:10:35 gate2 kernel: Inspecting /boot/System.map-2.2.5-15
May 4 08:10:35 gate2 kernel: Loaded 6716 symbols from
/boot/System.map-2.2.5-15.
May 4 08:10:35 gate2 kernel: Symbols match kernel version 2.2.5.
May 4 08:10:35 gate2 kernel: Loaded 18 symbols from 2 modules.
May 4 08:10:35 gate2 kernel: Linux version 2.2.5-15
(root at gate2.rstc.cc.al.us) (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #2 Mon May 3 15:16:04 CDT 1999
May 4 08:10:35 gate2 kernel: Detected 498833660 Hz processor.
May 4 08:10:35 gate2 kernel: Console: colour VGA+ 80x25
May 4 08:10:35 gate2 kernel: Calibrating delay loop... 498.07 BogoMIPS
May 4 08:10:35 gate2 kernel: Memory: 127660k/131072k available (1044k
kernel code, 412k reserved, 1572k data, 60k init)
May 4 08:10:35 gate2 kernel: VFS: Diskquotas version dquot_6.4.0
initialized
May 4 08:10:35 gate2 kernel: Pentium-III serial number disabled.
May 4 08:10:35 gate2 kernel: CPU: Intel 00/07 stepping 02
May 4 08:10:35 gate2 kernel: Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
May 4 08:10:35 gate2 kernel: Checking 'hlt' instruction... OK.
May 4 08:10:35 gate2 kernel: POSIX conformance testing by UNIFIX
May 4 08:10:35 gate2 kernel: mtrr: v1.26 (19981001) Richard Gooch
(rgooch at atnf.csiro.au)
May 4 08:10:35 gate2 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd95e
May 4 08:10:35 gate2 kernel: PCI: Using configuration type 1
May 4 08:10:35 gate2 kernel: PCI: Probing PCI hardware
May 4 08:10:35 gate2 kernel: Linux NET4.0 for Linux 2.2
May 4 08:10:35 gate2 kernel: Based upon Swansea University Computer Society
NET3.039
May 4 08:10:35 gate2 kernel: NET4: Unix domain sockets 1.0 for Linux
NET4.0.
May 4 08:10:35 gate2 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
May 4 08:10:35 gate2 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
May 4 08:10:35 gate2 kernel: Initializing RT netlink socket
May 4 08:10:35 gate2 kernel: Starting kswapd v 1.5
May 4 08:10:35 gate2 kernel: Detected PS/2 Mouse Port.
May 4 08:10:35 gate2 kernel: Serial driver version 4.27 with MANY_PORTS
MULTIPORT SHARE_IRQ enabled
May 4 08:10:35 gate2 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
May 4 08:10:35 gate2 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
May 4 08:10:35 gate2 kernel: pty: 256 Unix98 ptys configured
May 4 08:10:35 gate2 kernel: apm: BIOS not found.
May 4 08:10:35 gate2 kernel: Real Time Clock Driver v1.09
May 4 08:10:35 gate2 kernel: RAM disk driver initialized: 16 RAM disks of
4096K size
May 4 08:10:35 gate2 kernel: PIIX4: IDE controller on PCI bus 00 dev 11
May 4 08:10:35 gate2 kernel: PIIX4: not 100% native mode: will probe irqs
later
May 4 08:10:35 gate2 kernel: ide0: BM-DMA at 0x1050-0x1057, BIOS
settings: hda:DMA, hdb:pio
May 4 08:10:35 gate2 kernel: ide1: BM-DMA at 0x1058-0x105f, BIOS
settings: hdc:pio, hdd:pio
May 4 08:10:35 gate2 kernel: hda: TOSHIBA CD-ROM XM-6402B, ATAPI CDROM
drive
May 4 08:10:35 gate2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 4 08:10:35 gate2 kernel: hda: ATAPI 32X CD-ROM drive, 256kB Cache
May 4 08:10:35 gate2 kernel: Uniform CDROM driver Revision: 2.54
May 4 08:10:35 gate2 kernel: Floppy drive(s): fd0 is 1.44M
May 4 08:10:35 gate2 kernel: FDC 0 is a National Semiconductor PC87306
May 4 08:10:35 gate2 kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
May 4 08:10:35 gate2 kernel: raid5: measuring checksumming speed
May 4 08:10:35 gate2 kernel: raid5: using high-speed MMX checksum routine
May 4 08:10:35 gate2 kernel: pII_mmx : 1215.009 MB/sec
May 4 08:10:35 gate2 kernel: p5_mmx : 1173.480 MB/sec
May 4 08:10:35 gate2 kernel: 8regs : 859.536 MB/sec
May 4 08:10:35 gate2 kernel: 32regs : 617.601 MB/sec
May 4 08:10:35 gate2 kernel: using fastest function: pII_mmx (1215.009
MB/sec)
May 4 08:10:35 gate2 kernel: scsi : 0 hosts.
May 4 08:10:35 gate2 kernel: scsi : detected total.
May 4 08:10:35 gate2 kernel: md.c: sizeof(mdp_super_t) = 4096
May 4 08:10:35 gate2 kernel: Partition check:
May 4 08:10:35 gate2 kernel: RAMDISK: Compressed image found at block 0
May 4 08:10:35 gate2 kernel: autodetecting RAID arrays
May 4 08:10:35 gate2 kernel: autorun ...
May 4 08:10:35 gate2 kernel: ... autorun DONE.
May 4 08:10:35 gate2 kernel: VFS: Mounted root (ext2 filesystem).
May 4 08:10:35 gate2 kernel: (scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host
adapter> found at PCI 1/0
May 4 08:10:35 gate2 kernel: (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
May 4 08:10:35 gate2 atd: atd startup succeeded
May 4 08:10:35 gate2 kernel: (scsi0) Downloading sequencer code... 374
instructions downloaded
May 4 08:10:35 gate2 kernel: (scsi1) <Adaptec AIC-7890/1 Ultra2 SCSI host
adapter> found at PCI 9/0
May 4 08:10:35 gate2 kernel: (scsi1) Wide Channel, SCSI ID=7, 32/255 SCBs
May 4 08:10:35 gate2 kernel: (scsi1) Downloading sequencer code... 374
instructions downloaded
May 4 08:10:35 gate2 kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.16/3.2.4
May 4 08:10:35 gate2 kernel: <Adaptec AIC-7890/1 Ultra2 SCSI host
adapter>
May 4 08:10:35 gate2 kernel: scsi1 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.16/3.2.4
May 4 08:10:35 gate2 kernel: <Adaptec AIC-7890/1 Ultra2 SCSI host
adapter>
May 4 08:10:35 gate2 kernel: scsi : 2 hosts.
May 4 08:10:35 gate2 kernel: (scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec,
offset 15.
May 4 08:10:35 gate2 kernel: Vendor: SEAGATE Model: ST39173LW
Rev: 6246
May 4 08:10:35 gate2 kernel: Type: Direct-Access
ANSI SCSI revision: 02
May 4 08:10:35 gate2 kernel: Detected scsi disk sda at scsi0, channel 0, id
0, lun 0
May 4 08:10:35 gate2 kernel: (scsi1:0:2:0) Synchronous at 10.0 Mbyte/sec,
offset 15.
May 4 08:10:35 gate2 kernel: Vendor: Seagate Model: STT20000N
Rev: 6.36
May 4 08:10:35 gate2 kernel: Type: Sequential-Access
ANSI SCSI revision: 02
May 4 08:10:35 gate2 kernel: Detected scsi tape st0 at scsi1, channel 0, id
2, lun 0
May 4 08:10:35 gate2 kernel: SCSI device sda: hdwr sector= 512 bytes.
Sectors= 17783240 [8683 MB] [8.7 GB]
May 4 08:10:35 gate2 kernel: sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
May 4 08:10:35 gate2 kernel: autodetecting RAID arrays
May 4 08:10:35 gate2 kernel: autorun ...
May 4 08:10:35 gate2 kernel: ... autorun DONE.
May 4 08:10:35 gate2 kernel: VFS: Mounted root (ext2 filesystem) readonly.
May 4 08:10:35 gate2 kernel: change_root: old root has d_count=1
May 4 08:10:35 gate2 kernel: Trying to unmount old root ... okay
May 4 08:10:35 gate2 kernel: Freeing unused kernel memory: 60k freed
May 4 08:10:35 gate2 kernel: Adding Swap: 72256k swap-space (priority -1)
May 4 08:10:35 gate2 kernel: eth0: Intel EtherExpress Pro 10/100 at 0x1080,
00:C0:0D:00:C9:35, IRQ 9.
May 4 08:10:35 gate2 kernel: Board assembly 668081-002, Physical
connectors present: RJ45
May 4 08:10:35 gate2 kernel: Primary interface chip i82555 PHY #1.
May 4 08:10:35 gate2 kernel: General self-test: passed.
May 4 08:10:35 gate2 kernel: Serial sub-system self-test: passed.
May 4 08:10:35 gate2 kernel: Internal registers self-test: passed.
May 4 08:10:35 gate2 kernel: ROM checksum self-test: passed (0x24c9f043).
May 4 08:10:35 gate2 kernel: Receiver lock-up workaround activated.
May 4 08:10:35 gate2 kernel: eth1: OEM i82557/i82558 10/100 Ethernet at
0x10a0, 00:A0:C9:D9:05:05, IRQ 9.
May 4 08:10:35 gate2 kernel: Board assembly 697680-001, Physical
connectors present: RJ45
May 4 08:10:35 gate2 kernel: Primary interface chip i82555 PHY #1.
May 4 08:10:35 gate2 kernel: General self-test: passed.
May 4 08:10:35 gate2 kernel: Serial sub-system self-test: passed.
May 4 08:10:35 gate2 kernel: Internal registers self-test: passed.
May 4 08:10:35 gate2 kernel: ROM checksum self-test: passed (0x24c9f043).
May 4 08:10:35 gate2 kernel: Receiver lock-up workaround activated.
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
More information about the aic7xxx
mailing list