Re: drm-kmod-20220907_2 not supported for this configuration / NVIDIA : Failed to initialize the NVIDIA kernel module
Date: Sat, 24 Feb 2024 14:02:10 UTC
It persists installing nvidia-driver-535.146.02,but I suspect that it is too now for FreeBSD 13.1. On Sat, Feb 24, 2024 at 2:46 PM Mario Marietto <marietto2008@gmail.com> wrote: > :( > > KLD nvidia.ko : depends on kernel. Not available or version mismatch > linker_load_file : /boot/modules/nvidia.ko : unsupported file type. > > Can you give me your "nvidia.ko" file ? thanks. > > On Sat, Feb 24, 2024 at 3:09 PM Simon Gusev <semfly@fly777.net> wrote: > >> >> Hello Mario. >> >> I have problem too. >> A few days i try solve the same problem. >> Alone was a very difficult, but solved it. >> >> Try this. >> >> Remove all drm and clear. >> >> >> Try steps below. >> >> Install this >> pkg ins nvidia-xconfig >> >> pkg ins nvidia-driver - you card driver select >> >> pkg ins nvidia-drm - use pkg search and select your variant version >> But drm not needed for nvidia >> >> After instal >> nvidia-xconfig - will create Xorg conf file >> >> Start and load >> dbus >> kldload nvidia >> >> Try xfce or KDE >> >> Best, >> Simon ) >> >> - - - >> >> >> -------- Исходное сообщение -------- >> От: Mario Marietto <marietto2008@gmail.com> >> Дата: 24.02.2024 16:38 (GMT+03:00) >> Кому: FreeBSD virtualization <freebsd-virtualization@freebsd.org>, >> FreeBSD Mailing List <freebsd-questions@freebsd.org>, freebsd-hackers < >> freebsd-hackers@freebsd.org>, freebsd-x11@freebsd.org, >> freebsd-drivers@freebsd.org, Ronald Klop <ronald@freebsd.org>, Jake >> Freeland <jake@technologyfriends.net> >> Тема: drm-kmod-20220907_2 not supported for this configuration / NVIDIA : >> Failed to initialize the NVIDIA kernel module >> >> Hello to everyone. >> >> I need to conduct some tests on top of the FreeBSD 13.1. >> So,I've installed it on one of my disks. I've installed xfce4 and >> KDE,Xorg and from the ports (after having upgraded them),I've installed the >> nvidia-driver version. 535.146.02 ; I didn't have any problem. >> >> The problem arises when I tried to install the package drm-kmod from >> ports. >> >> Unfortunately I'm not able to compile it. This is what happened : >> >> root@marietto:/usr/ports/graphics/drm-kmod # make >> ====> drm-kmod-20220907_2 not supported for this configuration. >> >> ok. At this point I tried to install it from the packages : >> >> root@marietto:/usr/ports/graphics/drm-kmod # make clean >> ====> cleaning for drm-kmod-20220907_2 >> >> so : >> >> root@marietto:/usr/ports/graphics/drm-kmod # pkg install drm-kmod >> >> New packages to be INSTALLED : >> drm-kmod: 20220907_2 >> OK >> >> now,I have performed additional configuration to : >> >> nano /home/marietto/.xinitrc : >> >> exec ck-launch-session dbus-launch --exit-with-session startxfce4 >> >> nano /etc/rc.conf : >> >> kdm5_enable="YES" >> dbus_enable="YES" >> hald_enable="YES" >> kld_list="nvidia nvidia-modeset" >> rpcbind_enable="YES" >> dtcms_enable="YES" >> inetd_enable="YES" >> >> nano /boot/loader.conf >> >> vmm_load="YES" >> nmdm_load="YES" >> tmpfs_load="YES" >> cryptodev_load="YES" >> zfs_load="YES" >> kern.racct.enable="1" >> kern.vty=vt >> kern.cam.scsi_delay="10000" >> >> nano /etc/X11/xorg.conf >> >> Section "Device" >> Identifier "Card0" >> Driver "nvidia" >> BusID "PCI:1:0:0" >> EndSection >> >> >> root@marietto:/home/marietto # lspci >> >> 01:00.0 NVIDIA GP106 >> 01:00.1 NVIDIA GP106 High Definition Audio Controller >> 02:00.0 NVIDIA TU102 >> 02:00.1 NVIDIA TU102 High Definition Audio Controller >> 02:00.2 NVIDIA TU102 USB Controller >> 02:00.3 NVIDIA TU102 Serial BUS Controller >> >> Now,I want to startx to start xfce4 : >> >> marietto@marietto: $ startx >> >> Fatal server error : no screens found (EE) >> Check the log file at "/var/log/Xorg.0.log" >> >> nano /var/log/Xorg.0.log : >> >> NVIDIA dlloader X driver 535.146.02 >> NVIDIA Unified Driver for all Supported NVIDIA gpus >> NVIDIA : Failed to initialize the NVIDIA kernel module >> >> How to fix it ? >> >> -- >> Mario. >> > > > -- > Mario. > -- Mario.