Re: drm-kmod-20220907_2 not supported for this configuration / NVIDIA : Failed to initialize the NVIDIA kernel module

:(

KLD nvidia.ko : depends on kernel. Not available or version mismatch
linker_load_file : /boot/modules/nvidia.ko : unsupported file type.

Can you give me your "nvidia.ko" file ? thanks.

On Sat, Feb 24, 2024 at 3:09 PM Simon Gusev <semfly@fly777.net> wrote:

>
> Hello Mario.
>
> I have problem too.
> A few days i try solve the same problem.
> Alone was a very difficult, but solved it.
>
> Try this.
>
> Remove all drm and clear.
>
>
> Try steps below.
>
> Install this
> pkg ins nvidia-xconfig
>
> pkg ins nvidia-driver - you card driver select
>
> pkg ins nvidia-drm - use pkg search and select your variant version
> But drm not needed for nvidia
>
> After instal
> nvidia-xconfig - will create Xorg conf file
>
> Start and load
> dbus
> kldload nvidia
>
> Try xfce or KDE
>
> Best,
> Simon )
>
> - - -
>
>
> -------- Исходное сообщение --------
> От: Mario Marietto <marietto2008@gmail.com>
> Дата: 24.02.2024 16:38 (GMT+03:00)
> Кому: FreeBSD virtualization <freebsd-virtualization@freebsd.org>,
> FreeBSD Mailing List <freebsd-questions@freebsd.org>, freebsd-hackers <
> freebsd-hackers@freebsd.org>, freebsd-x11@freebsd.org,
> freebsd-drivers@freebsd.org, Ronald Klop <ronald@freebsd.org>, Jake
> Freeland <jake@technologyfriends.net>
> Тема: drm-kmod-20220907_2 not supported for this configuration / NVIDIA :
> Failed to initialize the NVIDIA kernel module
>
> Hello to everyone.
>
> I need to conduct some tests on top of the FreeBSD 13.1.
> So,I've installed it on one of my disks. I've installed xfce4 and KDE,Xorg
> and from the ports (after having upgraded them),I've installed the
> nvidia-driver version. 535.146.02 ; I didn't have any problem.
>
> The problem arises when I tried to install the package drm-kmod from
> ports.
>
> Unfortunately I'm not able to compile it. This is what happened :
>
> root@marietto:/usr/ports/graphics/drm-kmod # make
> ====> drm-kmod-20220907_2 not supported for this configuration.
>
> ok. At this point I tried to install it from the packages :
>
> root@marietto:/usr/ports/graphics/drm-kmod # make clean
> ====> cleaning for drm-kmod-20220907_2
>
> so :
>
> root@marietto:/usr/ports/graphics/drm-kmod # pkg install drm-kmod
>
> New packages to be INSTALLED :
> drm-kmod: 20220907_2
> OK
>
> now,I have performed additional configuration to :
>
> nano /home/marietto/.xinitrc :
>
> exec ck-launch-session dbus-launch --exit-with-session startxfce4
>
> nano /etc/rc.conf :
>
> kdm5_enable="YES"
> dbus_enable="YES"
> hald_enable="YES"
> kld_list="nvidia nvidia-modeset"
> rpcbind_enable="YES"
> dtcms_enable="YES"
> inetd_enable="YES"
>
> nano /boot/loader.conf
>
> vmm_load="YES"
> nmdm_load="YES"
> tmpfs_load="YES"
> cryptodev_load="YES"
> zfs_load="YES"
> kern.racct.enable="1"
> kern.vty=vt
> kern.cam.scsi_delay="10000"
>
> nano /etc/X11/xorg.conf
>
> Section "Device"
>                Identifier   "Card0"
>                Driver         "nvidia"
>                BusID          "PCI:1:0:0"
> EndSection
>
>
> root@marietto:/home/marietto # lspci
>
> 01:00.0 NVIDIA GP106
> 01:00.1 NVIDIA GP106 High Definition Audio Controller
> 02:00.0 NVIDIA TU102
> 02:00.1 NVIDIA TU102 High Definition Audio Controller
> 02:00.2 NVIDIA TU102 USB Controller
> 02:00.3 NVIDIA TU102 Serial BUS Controller
>
> Now,I want to startx to start xfce4 :
>
> marietto@marietto: $ startx
>
> Fatal server error : no screens found (EE)
> Check the log file at "/var/log/Xorg.0.log"
>
> nano /var/log/Xorg.0.log :
>
> NVIDIA dlloader X driver 535.146.02
> NVIDIA Unified Driver for all Supported NVIDIA gpus
> NVIDIA : Failed to initialize the NVIDIA kernel module
>
> How to fix it ?
>
> --
> Mario.
>


-- 
Mario.