FreeBSD-main-amd64-test - Build #20508 - Still Failing

From: <jenkins-admin_at_FreeBSD.org>
Date: Fri, 28 Jan 2022 23:12:51 UTC
FreeBSD-main-amd64-test - Build #20508 (2e8d1a55258d39f7315fa4f2164c0fce96e79802) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20508/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20508/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20508/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

99830f702d8deab33c8704b4d2747385e5c8aac2 by mhorne:
libpmc: remove mips support

b1ab9568bcacec529b991312798142ceb90e7a68 by mhorne:
hwpmc: remove mips event definitions

2e8d1a55258d39f7315fa4f2164c0fce96e79802 by jhb:
iscsi: Allocate a dummy PDU for the internal nexus reset task.



The end of the build log:

[...truncated 4.20 MB...]
epair1a: Ethernet address: 02:ee:a2:f2:3f:0a
epair1b: Ethernet address: 02:ee:a2:f2:3f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:e2:8a:e3:02:0a
epair2b: Ethernet address: 02:e2:8a:e3:02:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:b1:d8:02:ab:0a
epair3b: Ethernet address: 02:b1:d8:02:ab:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed  [0.554s]
sys/netpfil/common/dummynet:ipfw_interface_removal  ->  epair0a: Ethernet address: 02:fa:54:b8:80:0a
epair0b: Ethernet address: 02:fa:54:b8:80:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [7.386s]
sys/netpfil/common/dummynet:ipfw_pipe  ->  epair0a: Ethernet address: 02:22:03:a8:15:0a
epair0b: Ethernet address: 02:22:03:a8:15:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [27.530s]
sys/netpfil/common/dummynet:ipfw_pipe_v6  ->  epair0a: Ethernet address: 02:02:8e:bc:b8:0a
epair0b: Ethernet address: 02:02:8e:bc:b8:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [24.574s]
sys/netpfil/common/dummynet:ipfw_queue  ->  epair0a: Ethernet address: 02:9f:40:e6:1f:0a
epair0b: Ethernet address: 02:9f:40:e6:1f:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 239 to 200 packets/sec
Limiting icmp ping response from 270 to 200 packets/sec
Limiting icmp ping response from 240 to 200 packets/sec
Limiting icmp ping response from 252 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 252 to 200 packets/sec
Limiting icmp ping response from 247 to 200 packets/sec
Limiting icmp ping response from 249 to 200 packets/sec
Limiting icmp ping response from 247 to 200 packets/sec
Limiting icmp ping response from 250 to 200 packets/sec
Limiting closed port RST response from 10166 to 200 packets/sec
Limiting icmp ping response from 248 to 200 packets/sec
Limiting icmp ping response from 255 to 200 packets/sec
Limiting icmp ping response from 246 to 200 packets/sec
Limiting icmp ping response from 243 to 200 packets/sec
Limiting icmp ping response from 246 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 267 to 200 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [18.048s]
sys/netpfil/common/dummynet:ipfw_queue_v6  ->  epair0a: Ethernet address: 02:52:ed:7b:c3:0a
epair0b: Ethernet address: 02:52:ed:7b:c3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [14.116s]
sys/netpfil/common/dummynet:pf_interface_removal  ->  epair0a: Ethernet address: 02:91:84:81:99:0a
epair0b: Ethernet address: 02:91:84:81:99:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [5.956s]
sys/netpfil/common/dummynet:pf_nat  ->  epair0a: Ethernet address: 02:b1:6c:e4:59:0a
epair0b: Ethernet address: 02:b1:6c:e4:59:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:d7:81:da:b4:0a
epair1b: Ethernet address: 02:d7:81:da:b4:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.862s]
sys/netpfil/common/dummynet:pf_pipe  ->  epair0a: Ethernet address: 02:39:a8:2f:b4:0a
epair0b: Ethernet address: 02:39:a8:2f:b4:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [24.751s]
sys/netpfil/common/dummynet:pf_pipe_v6  ->  epair0a: Ethernet address: 02:6a:44:4f:67:0a
epair0b: Ethernet address: 02:6a:44:4f:67:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [22.557s]
sys/netpfil/common/dummynet:pf_queue  ->  epair0a: Ethernet address: 02:19:3f:df:70:0a
epair0b: Ethernet address: 02:19:3f:df:70:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 237 to 200 packets/sec
Limiting icmp ping response from 220 to 200 packets/sec
Limiting icmp ping response from 286 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 267 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 250 to 200 packets/sec
Limiting icmp ping response from 255 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 258 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 258 to 200 packets/sec
Limiting icmp ping response from 256 to 200 packets/sec
Limiting icmp ping response from 268 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 259 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
Limiting icmp ping response from 259 to 200 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [18.078s]
sys/netpfil/common/dummynet:pf_queue_v6  ->  epair0a: Ethernet address: 02:c5:e3:0c:9e:0a
epair0b: Ethernet address: 02:c5:e3:0c:9e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address	= 0x10
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80e2ab3f
stack pointer	        = 0x28:0xfffffe00cb1adc40
frame pointer	        = 0x28:0xfffffe00cb1add10
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (dummynet)
trap number		= 12
panic: page fault
cpuid = 1
time = 1643411569
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00cb1ada00
vpanic() at vpanic+0x17f/frame 0xfffffe00cb1ada50
panic() at panic+0x43/frame 0xfffffe00cb1adab0
trap_fatal() at trap_fatal+0x385/frame 0xfffffe00cb1adb10
trap_pfault() at trap_pfault+0xab/frame 0xfffffe00cb1adb70
calltrap() at calltrap+0x8/frame 0xfffffe00cb1adb70
--- trap 0xc, rip = 0xffffffff80e2ab3f, rsp = 0xfffffe00cb1adc40, rbp = 0xfffffe00cb1add10 ---
ip6_input() at ip6_input+0x4f/frame 0xfffffe00cb1add10
netisr_dispatch_src() at netisr_dispatch_src+0xaf/frame 0xfffffe00cb1add70
dummynet_send() at dummynet_send+0x1dd/frame 0xfffffe00cb1addb0
dummynet_task() at dummynet_task+0x36d/frame 0xfffffe00cb1ade40
taskqueue_run_locked() at taskqueue_run_locked+0xaa/frame 0xfffffe00cb1adec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xc2/frame 0xfffffe00cb1adef0
fork_exit() at fork_exit+0x80/frame 0xfffffe00cb1adf30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00cb1adf30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 100106 ]
Stopped at      kdb_enter+0x37: movq    $0,0x1283a2e(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008f59b600
curthread    = 0xfffffe00987e3740: pid 0 tid 100106 critnest 1 "dummynet"
curpcb       = 0xfffffe00987e3c50
fpcurthread  = none
idlethread   = 0xfffffe001122ec80: tid 100004 "idle: cpu1"
self         = 0xffffffff82411000
curpmap      = 0xffffffff81e8c258
tssp         = 0xffffffff82411384
rsp0         = 0xfffffe00cb1ae000
kcr3         = 0x8000000002363003
ucr3         = 0xffffffffffffffff
scr3         = 0x17e86183d
gs32p        = 0xffffffff82411404
ldt          = 0xffffffff82411444
tss          = 0xffffffff82411434
curvnet      = 0xfffff800097e1140
spin locks held:
db:0:kdb.enter.panic>  reset
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-20508' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
x ./run.sh
x ./disable-dtrace-tests.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins6184999988888483173.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '2e8d1a55258d39f7315fa4f2164c0fce96e79802', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../2e8d1a55258d39f7315fa4f2164c0fce96e79802/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address