FreeBSD-main-amd64-test - Build #20507 - Still Failing
Date: Fri, 28 Jan 2022 21:56:54 UTC
FreeBSD-main-amd64-test - Build #20507 (29998bf2ac4cc3ac49827336655bdbcb755eeffc) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20507/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20507/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20507/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
ffc1cc95e78ec05a3e1a0aed869e33a44d9f6641 by mav:
GEOM: Relax direct dispatch for GEOM threads.
29998bf2ac4cc3ac49827336655bdbcb755eeffc by mav:
glabel: Set G_CF_DIRECT_SEND/RECEIVE for taste consumer.
The end of the build log:
[...truncated 4.20 MB...]
epair1a: Ethernet address: 02:b3:ca:f7:7e:0a
epair1b: Ethernet address: 02:b3:ca:f7:7e:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:80:61:e3:b0:0a
epair2b: Ethernet address: 02:80:61:e3:b0:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:a6:19:d7:07:0a
epair3b: Ethernet address: 02:a6:19:d7:07:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed [0.570s]
sys/netpfil/common/dummynet:ipfw_interface_removal -> epair0a: Ethernet address: 02:36:8c:15:87:0a
epair0b: Ethernet address: 02:36:8c:15:87:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [7.486s]
sys/netpfil/common/dummynet:ipfw_pipe -> epair0a: Ethernet address: 02:64:43:bd:87:0a
epair0b: Ethernet address: 02:64:43:bd:87:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [27.582s]
sys/netpfil/common/dummynet:ipfw_pipe_v6 -> epair0a: Ethernet address: 02:9f:52:d9:ad:0a
epair0b: Ethernet address: 02:9f:52:d9:ad:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [24.568s]
sys/netpfil/common/dummynet:ipfw_queue -> epair0a: Ethernet address: 02:8f:33:07:f7:0a
epair0b: Ethernet address: 02:8f:33:07:f7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 234 to 200 packets/sec
Limiting icmp ping response from 270 to 200 packets/sec
Limiting icmp ping response from 290 to 200 packets/sec
Limiting icmp ping response from 259 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 259 to 200 packets/sec
Limiting icmp ping response from 258 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting closed port RST response from 16378 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 255 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 255 to 200 packets/sec
Limiting icmp ping response from 259 to 200 packets/sec
Limiting icmp ping response from 252 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [18.326s]
sys/netpfil/common/dummynet:ipfw_queue_v6 -> epair0a: Ethernet address: 02:e2:60:4a:bc:0a
epair0b: Ethernet address: 02:e2:60:4a:bc:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [14.217s]
sys/netpfil/common/dummynet:pf_interface_removal -> epair0a: Ethernet address: 02:8b:a3:07:59:0a
epair0b: Ethernet address: 02:8b:a3:07:59:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [5.935s]
sys/netpfil/common/dummynet:pf_nat -> epair0a: Ethernet address: 02:84:18:26:a5:0a
epair0b: Ethernet address: 02:84:18:26:a5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:e6:c5:53:db:0a
epair1b: Ethernet address: 02:e6:c5:53:db:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [0.800s]
sys/netpfil/common/dummynet:pf_pipe -> epair0a: Ethernet address: 02:60:1f:e9:29:0a
epair0b: Ethernet address: 02:60:1f:e9:29:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [24.753s]
sys/netpfil/common/dummynet:pf_pipe_v6 -> epair0a: Ethernet address: 02:1f:0b:30:60:0a
epair0b: Ethernet address: 02:1f:0b:30:60:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [22.518s]
sys/netpfil/common/dummynet:pf_queue -> epair0a: Ethernet address: 02:55:1e:f4:4e:0a
epair0b: Ethernet address: 02:55:1e:f4:4e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 240 to 200 packets/sec
Limiting icmp ping response from 218 to 200 packets/sec
Limiting icmp ping response from 286 to 200 packets/sec
Limiting icmp ping response from 270 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 267 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
Limiting icmp ping response from 258 to 200 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [18.047s]
sys/netpfil/common/dummynet:pf_queue_v6 -> epair0a: Ethernet address: 02:a5:55:5a:b7:0a
epair0b: Ethernet address: 02:a5:55:5a:b7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x10
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e2ab3f
stack pointer = 0x28:0xfffffe00985c9c40
frame pointer = 0x28:0xfffffe00985c9d10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (dummynet)
trap number = 12
panic: page fault
cpuid = 1
time = 1643407012
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00985c9a00
vpanic() at vpanic+0x17f/frame 0xfffffe00985c9a50
panic() at panic+0x43/frame 0xfffffe00985c9ab0
trap_fatal() at trap_fatal+0x385/frame 0xfffffe00985c9b10
trap_pfault() at trap_pfault+0xab/frame 0xfffffe00985c9b70
calltrap() at calltrap+0x8/frame 0xfffffe00985c9b70
--- trap 0xc, rip = 0xffffffff80e2ab3f, rsp = 0xfffffe00985c9c40, rbp = 0xfffffe00985c9d10 ---
ip6_input() at ip6_input+0x4f/frame 0xfffffe00985c9d10
netisr_dispatch_src() at netisr_dispatch_src+0xaf/frame 0xfffffe00985c9d70
dummynet_send() at dummynet_send+0x1dd/frame 0xfffffe00985c9db0
dummynet_task() at dummynet_task+0x36d/frame 0xfffffe00985c9e40
taskqueue_run_locked() at taskqueue_run_locked+0xaa/frame 0xfffffe00985c9ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xc2/frame 0xfffffe00985c9ef0
fork_exit() at fork_exit+0x80/frame 0xfffffe00985c9f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00985c9f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 100105 ]
Stopped at kdb_enter+0x37: movq $0,0x1283a2e(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 1
dynamic pcpu = 0xfffffe008f59b600
curthread = 0xfffffe00987e0020: pid 0 tid 100105 critnest 1 "dummynet"
curpcb = 0xfffffe00987e0530
fpcurthread = none
idlethread = 0xfffffe001122ec80: tid 100004 "idle: cpu1"
self = 0xffffffff82411000
curpmap = 0xffffffff81e8c258
tssp = 0xffffffff82411384
rsp0 = 0xfffffe00985ca000
kcr3 = 0x8000000002363002
ucr3 = 0xffffffffffffffff
scr3 = 0x23f97a24
gs32p = 0xffffffff82411404
ldt = 0xffffffff82411444
tss = 0xffffffff82411434
curvnet = 0xfffff8007e8f9540
spin locks held:
db:0:kdb.enter.panic> reset
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-20507' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./run.sh
x ./disable-notyet-tests.sh
x ./disable-dtrace-tests.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins700398419799372885.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '29998bf2ac4cc3ac49827336655bdbcb755eeffc', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../29998bf2ac4cc3ac49827336655bdbcb755eeffc/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address