svn commit: r273679 - stable/10/sys/arm/freescale/imx

[Ian Lepore]

Author: ian
Date: Sun Oct 26 04:11:32 2014
New Revision: 273679
URL: https://svnweb.freebsd.org/changeset/base/273679

Log:
  MFC r273283:
  
    Attach this driver during BUS_PASS_BUS and move the cpu init code to a
    bus_new_pass() handler so it doesn't happen until BUS_PASS_CPU.  This allows
    the anatop driver to outbid the generic simplebus driver (which the FDT
    data describes as compatible).

Modified:
  stable/10/sys/arm/freescale/imx/imx6_anatop.c
Directory Properties:
  stable/10/   (props changed)

Modified: stable/10/sys/arm/freescale/imx/imx6_anatop.c
==============================================================================
--- stable/10/sys/arm/freescale/imx/imx6_anatop.c	Sun Oct 26 04:10:17 2014	(r273678)
+++ stable/10/sys/arm/freescale/imx/imx6_anatop.c	Sun Oct 26 04:11:32 2014	(r273679)
@@ -98,6 +98,7 @@ struct imx6_anatop_softc {
 	uint32_t	cpu_maxmv;
 	uint32_t	cpu_maxmhz_hw;
 	boolean_t	cpu_overclock_enable;
+	boolean_t	cpu_init_done;
 	uint32_t	refosc_mhz;
 	void		*temp_intrhand;
 	uint32_t	temp_high_val;
@@ -626,6 +627,31 @@ intr_setup(void *arg)
 	config_intrhook_disestablish(&sc->intr_setup_hook);
 }
 
+static void
+imx6_anatop_new_pass(device_t dev)
+{
+	struct imx6_anatop_softc *sc;
+	const int cpu_init_pass = BUS_PASS_CPU + BUS_PASS_ORDER_MIDDLE;
+
+	/*
+	 * We attach during BUS_PASS_BUS (because some day we will be a
+	 * simplebus that has regulator devices as children), but some of our
+	 * init work cannot be done until BUS_PASS_CPU (we rely on other devices
+	 * that attach on the CPU pass).
+	 */
+	sc = device_get_softc(dev);
+	if (!sc->cpu_init_done && bus_current_pass >= cpu_init_pass) {
+		sc->cpu_init_done = true;
+		cpufreq_initialize(sc);
+		initialize_tempmon(sc);
+		if (bootverbose) {
+			device_printf(sc->dev, "CPU %uMHz @ %umV\n", 
+			    sc->cpu_curmhz, sc->cpu_curmv);
+		}
+	}
+	bus_generic_new_pass(dev);
+}
+
 static int
 imx6_anatop_detach(device_t dev)
 {
@@ -669,13 +695,13 @@ imx6_anatop_attach(device_t dev)
 	imx6_anatop_write_4(IMX6_ANALOG_PMU_MISC0_SET, 
 	    IMX6_ANALOG_PMU_MISC0_SELFBIASOFF);
 
-	cpufreq_initialize(sc);
-	initialize_tempmon(sc);
+	/*
+	 * Some day, when we're ready to deal with the actual anatop regulators
+	 * that are described in fdt data as children of this "bus", this would
+	 * be the place to invoke a simplebus helper routine to instantiate the
+	 * children from the fdt data.
+	 */
 
-	if (bootverbose) {
-		device_printf(sc->dev, "CPU %uMHz @ %umV\n", sc->cpu_curmhz,
-		    sc->cpu_curmv);
-	}
 	err = 0;
 
 out:
@@ -718,6 +744,9 @@ static device_method_t imx6_anatop_metho
 	DEVMETHOD(device_attach, imx6_anatop_attach),
 	DEVMETHOD(device_detach, imx6_anatop_detach),
 
+	/* Bus interface */
+	DEVMETHOD(bus_new_pass,  imx6_anatop_new_pass),
+
 	DEVMETHOD_END
 };
 
@@ -730,5 +759,7 @@ static driver_t imx6_anatop_driver = {
 static devclass_t imx6_anatop_devclass;
 
 EARLY_DRIVER_MODULE(imx6_anatop, simplebus, imx6_anatop_driver,
-    imx6_anatop_devclass, 0, 0, BUS_PASS_CPU + BUS_PASS_ORDER_FIRST + 1);
+    imx6_anatop_devclass, 0, 0, BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE);
+EARLY_DRIVER_MODULE(imx6_anatop, ofwbus, imx6_anatop_driver,
+    imx6_anatop_devclass, 0, 0, BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE);