svn commit: r239490 - stable/8/sys/dev/esp
Marius Strobl
marius at FreeBSD.org
Tue Aug 21 10:30:57 UTC 2012
Author: marius
Date: Tue Aug 21 10:30:57 2012
New Revision: 239490
URL: http://svn.freebsd.org/changeset/base/239490
Log:
MFC: r239089
- Merge from NetBSD:
When issuing a non-DMA command, make sure to set the "remaining length of
command to be transferred via DMA" (sc_cmdlen) to zero up-front, otherwise
we might get confused on command competition interrupt (no DMA active but
still data left to transfer).
- Implement handling of MSG_IGN_WIDE_RESIDUE which some targets produce, as
just rejecting these leads to a resend and disconnect loop.
Reported and tested by: mjacob
Modified:
stable/8/sys/dev/esp/ncr53c9x.c
Directory Properties:
stable/8/sys/ (props changed)
stable/8/sys/amd64/include/xen/ (props changed)
stable/8/sys/boot/ (props changed)
stable/8/sys/cddl/ (props changed)
stable/8/sys/cddl/contrib/opensolaris/ (props changed)
stable/8/sys/compat/ (props changed)
stable/8/sys/contrib/dev/acpica/ (props changed)
stable/8/sys/contrib/pf/ (props changed)
stable/8/sys/dev/ (props changed)
stable/8/sys/dev/e1000/ (props changed)
stable/8/sys/dev/sound/ (props changed)
stable/8/sys/dev/sound/pci/ (props changed)
stable/8/sys/dev/virtio/ (props changed)
stable/8/sys/kern/ (props changed)
stable/8/sys/sys/ (props changed)
stable/8/sys/vm/ (props changed)
Modified: stable/8/sys/dev/esp/ncr53c9x.c
==============================================================================
--- stable/8/sys/dev/esp/ncr53c9x.c Tue Aug 21 09:55:57 2012 (r239489)
+++ stable/8/sys/dev/esp/ncr53c9x.c Tue Aug 21 10:30:57 2012 (r239490)
@@ -26,7 +26,7 @@
*
*/
-/* $NetBSD: ncr53c9x.c,v 1.143 2011/07/31 18:39:00 jakllsch Exp $ */
+/* $NetBSD: ncr53c9x.c,v 1.145 2012/06/18 21:23:56 martin Exp $ */
/*-
* Copyright (c) 1998, 2002 The NetBSD Foundation, Inc.
@@ -256,7 +256,7 @@ ncr53c9x_attach(struct ncr53c9x_softc *s
return (EINVAL);
}
- device_printf(sc->sc_dev, "%s, %dMHz, SCSI ID %d\n",
+ device_printf(sc->sc_dev, "%s, %d MHz, SCSI ID %d\n",
ncr53c9x_variant_names[sc->sc_rev], sc->sc_freq, sc->sc_id);
sc->sc_ntarg = (sc->sc_rev == NCR_VARIANT_FAS366) ? 16 : 8;
@@ -890,11 +890,8 @@ ncr53c9x_select(struct ncr53c9x_softc *s
sc->sc_cmdp = cmd;
error = NCRDMA_SETUP(sc, &sc->sc_cmdp, &sc->sc_cmdlen, 0,
&dmasize);
- if (error != 0) {
- sc->sc_cmdlen = 0;
- sc->sc_cmdp = NULL;
+ if (error != 0)
goto cmd;
- }
/* Program the SCSI counter. */
NCR_SET_COUNT(sc, dmasize);
@@ -920,6 +917,7 @@ cmd:
*/
/* Now get the command into the FIFO. */
+ sc->sc_cmdlen = 0;
ncr53c9x_wrfifo(sc, cmd, clen);
/* And get the target's attention. */
@@ -1771,7 +1769,7 @@ ncr53c9x_msgin(struct ncr53c9x_softc *sc
struct ncr53c9x_linfo *li;
struct ncr53c9x_tinfo *ti;
uint8_t *pb;
- int lun, plen;
+ int len, lun;
NCR_LOCK_ASSERT(sc, MA_OWNED);
@@ -1818,15 +1816,15 @@ ncr53c9x_msgin(struct ncr53c9x_softc *sc
*/
case NCR_RESELECTED:
pb = sc->sc_imess + 1;
- plen = sc->sc_imlen - 1;
+ len = sc->sc_imlen - 1;
break;
default:
pb = sc->sc_imess;
- plen = sc->sc_imlen;
+ len = sc->sc_imlen;
}
- if (__verify_msg_format(pb, plen))
+ if (__verify_msg_format(pb, len))
goto gotit;
}
@@ -1963,6 +1961,29 @@ gotit:
sc->sc_dleft = ecb->dleft;
break;
+ case MSG_IGN_WIDE_RESIDUE:
+ NCR_MSGS(("ignore wide residue (%d bytes)",
+ sc->sc_imess[1]));
+ if (sc->sc_imess[1] != 1) {
+ xpt_print_path(ecb->ccb->ccb_h.path);
+ printf("unexpected MESSAGE IGNORE WIDE "
+ "RESIDUE (%d bytes); sending REJECT\n",
+ sc->sc_imess[1]);
+ goto reject;
+ }
+ /*
+ * If there was a last transfer of an even number of
+ * bytes, wipe the "done" memory and adjust by one
+ * byte (sc->sc_imess[1]).
+ */
+ len = sc->sc_dleft - ecb->dleft;
+ if (len != 0 && (len & 1) == 0) {
+ ecb->flags &= ~ECB_TENTATIVE_DONE;
+ sc->sc_dp = (char *)sc->sc_dp - 1;
+ sc->sc_dleft--;
+ }
+ break;
+
case MSG_EXTENDED:
NCR_MSGS(("extended(%x) ", sc->sc_imess[2]));
switch (sc->sc_imess[2]) {
@@ -2272,6 +2293,7 @@ cmd:
/*
* XXX FIFO size
*/
+ sc->sc_cmdlen = 0;
ncr53c9x_flushfifo(sc);
ncr53c9x_wrfifo(sc, sc->sc_omp, sc->sc_omlen);
NCRCMD(sc, NCRCMD_TRANS);
@@ -2811,9 +2833,10 @@ again:
* (Timing problems?)
*/
if (sc->sc_features & NCR_F_DMASELECT) {
- if (sc->sc_cmdlen == 0)
+ if (sc->sc_cmdlen == 0) {
/* Hope for the best... */
break;
+ }
} else if ((NCR_READ_REG(sc, NCR_FFLAG) &
NCRFIFO_FF) == 0) {
/* Hope for the best... */
@@ -2986,11 +3009,8 @@ msgin:
sc->sc_cmdp = (void *)&ecb->cmd.cmd;
error = NCRDMA_SETUP(sc, &sc->sc_cmdp, &sc->sc_cmdlen,
0, &size);
- if (error != 0) {
- sc->sc_cmdlen = 0;
- sc->sc_cmdp = NULL;
+ if (error != 0)
goto cmd;
- }
/* Program the SCSI counter. */
NCR_SET_COUNT(sc, size);
@@ -3005,6 +3025,7 @@ msgin:
break;
}
cmd:
+ sc->sc_cmdlen = 0;
ncr53c9x_wrfifo(sc, (uint8_t *)&ecb->cmd.cmd, ecb->clen);
NCRCMD(sc, NCRCMD_TRANS);
sc->sc_prevphase = COMMAND_PHASE;
@@ -3046,7 +3067,7 @@ setup_xfer:
goto finish;
}
- /* Target returned to data phase: wipe "done" memory */
+ /* Target returned to data phase: wipe "done" memory. */
ecb->flags &= ~ECB_TENTATIVE_DONE;
/* Program the SCSI counter. */
@@ -3105,8 +3126,8 @@ shortcut:
* overhead to pay. For example, selecting, sending a message
* and command and then doing some work can be done in one "pass".
*
- * The delay is a heuristic. It is 2 when at 20MHz, 2 at 25MHz and 1
- * at 40MHz. This needs testing.
+ * The delay is a heuristic. It is 2 when at 20 MHz, 2 at 25 MHz and
+ * 1 at 40 MHz. This needs testing.
*/
microtime(&wait);
wait.tv_usec += 50 / sc->sc_freq;
@@ -3191,8 +3212,7 @@ ncr53c9x_callout(void *arg)
ncr53c9x_abort(sc, ecb);
/* Disable sync mode if stuck in a data phase. */
- if (ecb == sc->sc_nexus &&
- ti->curr.offset != 0 &&
+ if (ecb == sc->sc_nexus && ti->curr.offset != 0 &&
(sc->sc_phase & (MSGI | CDI)) == 0) {
/* XXX ASYNC CALLBACK! */
ti->goal.offset = 0;
More information about the svn-src-stable
mailing list