svn commit: r222777 - in stable/8: share/man/man4 sys/conf
sys/dev/usb sys/dev/usb/serial sys/modules/usb sys/modules/usb/umcs
Hans Petter Selasky
hselasky at FreeBSD.org
Mon Jun 6 20:58:15 UTC 2011
Author: hselasky
Date: Mon Jun 6 20:58:15 2011
New Revision: 222777
URL: http://svn.freebsd.org/changeset/base/222777
Log:
MFC r222578 and r222696.
Add new USB serial device driver.
Added:
stable/8/share/man/man4/umcs.4
- copied unchanged from r222696, head/share/man/man4/umcs.4
stable/8/sys/dev/usb/serial/umcs.c
- copied unchanged from r222696, head/sys/dev/usb/serial/umcs.c
stable/8/sys/dev/usb/serial/umcs.h
- copied unchanged from r222696, head/sys/dev/usb/serial/umcs.h
stable/8/sys/modules/usb/umcs/
- copied from r222696, head/sys/modules/usb/umcs/
Modified:
stable/8/share/man/man4/Makefile
stable/8/share/man/man4/ucom.4
stable/8/sys/conf/files
stable/8/sys/dev/usb/usb_process.c
stable/8/sys/dev/usb/usbdevs
stable/8/sys/modules/usb/Makefile
Directory Properties:
stable/8/share/man/man4/ (props changed)
stable/8/sys/ (props changed)
stable/8/sys/amd64/include/xen/ (props changed)
stable/8/sys/cddl/contrib/opensolaris/ (props changed)
stable/8/sys/contrib/dev/acpica/ (props changed)
stable/8/sys/contrib/pf/ (props changed)
Modified: stable/8/share/man/man4/Makefile
==============================================================================
--- stable/8/share/man/man4/Makefile Mon Jun 6 20:49:16 2011 (r222776)
+++ stable/8/share/man/man4/Makefile Mon Jun 6 20:58:15 2011 (r222777)
@@ -462,6 +462,7 @@ MAN= aac.4 \
ukbd.4 \
ulpt.4 \
umass.4 \
+ umcs.4 \
umct.4 \
umodem.4 \
ums.4 \
Modified: stable/8/share/man/man4/ucom.4
==============================================================================
--- stable/8/share/man/man4/ucom.4 Mon Jun 6 20:49:16 2011 (r222776)
+++ stable/8/share/man/man4/ucom.4 Mon Jun 6 20:58:15 2011 (r222777)
@@ -93,6 +93,7 @@ Old scripts must be adjusted accordingly
.Xr uark 4 ,
.Xr uchcom 4 ,
.Xr uftdi 4 ,
+.Xr umcs 4 ,
.Xr umct 4 ,
.Xr umodem 4 ,
.Xr uplcom 4 ,
Copied: stable/8/share/man/man4/umcs.4 (from r222696, head/share/man/man4/umcs.4)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/8/share/man/man4/umcs.4 Mon Jun 6 20:58:15 2011 (r222777, copy of r222696, head/share/man/man4/umcs.4)
@@ -0,0 +1,97 @@
+.\"
+.\" Copyright (c) 2010 Lev Serebryakov <lev at FreeBSD.org>.
+.\" All rights reserved.
+.\"
+.\" This code is derived from software contributed to The NetBSD Foundation
+.\" by Lennart Augustsson.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" $FreeBSD$
+.\"
+.Dd December 10, 2010
+.Dt UMCS 4
+.Os
+.Sh NAME
+.Nm umcs
+.Nd USB support for serial adapters based on the MCS7820 and MCS7840 chips
+.Sh SYNOPSIS
+To compile this driver into the kernel,
+place the following lines in your
+kernel configuration file:
+.Bd -ragged -offset indent
+.Cd "device umcs"
+.Ed
+.Pp
+Alternatively, to load the driver as a
+module at boot time, place the following line in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+umcs_load="YES"
+.Ed
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for various multiport serial adapters based on the MosCom
+MCS7820 and MCS7840 chips. They are 2- or 4-port adapters with full-featured
+16550-compatible UARTs and very flexible baud generators. Also, these chips
+support RS422/RS485 and IrDA oprations.
+.Pp
+The device is accessed through the
+.Xr ucom 4
+driver which makes it behave like a
+.Xr tty 4 .
+.Pp
+Different ports on device are presented as sub-units, like
+.Pa /dev/ttyU0.1
+and
+.Pa /dev/ttyU0.2
+.Sh HARDWARE
+The
+.Nm
+driver was tested on the following adapters:
+.Pp
+.Bl -bullet -compact
+.It
+ST Lab U-360 two-port serial USB adapter
+.It
+ST Lab U-400 four-port serial USB adapter
+.El
+.Sh SEE ALSO
+.Xr tty 4 ,
+.Xr ucom 4 ,
+.Xr usb 4
+.Sh BUGS
+This driver doesn't support access to any fine tunes of
+chip, like RS522/RS485 mode, non-standard baudrates, etc.
+.Sh HISTORY
+The
+.Nm
+driver
+appeared in ports since December of 2010.
+.Sh AUTHORS
+.An -nosplit
+The
+.Nm
+driver was written by
+.An Lev Serebryakov
+.Aq lev at FreeBSD.org .
Modified: stable/8/sys/conf/files
==============================================================================
--- stable/8/sys/conf/files Mon Jun 6 20:49:16 2011 (r222776)
+++ stable/8/sys/conf/files Mon Jun 6 20:58:15 2011 (r222777)
@@ -1792,6 +1792,7 @@ dev/usb/serial/uftdi.c optional uftdi
dev/usb/serial/ugensa.c optional ugensa
dev/usb/serial/uipaq.c optional uipaq
dev/usb/serial/ulpt.c optional ulpt
+dev/usb/serial/umcs.c optional umcs
dev/usb/serial/umct.c optional umct
dev/usb/serial/umodem.c optional umodem
dev/usb/serial/umoscom.c optional umoscom
@@ -1801,7 +1802,7 @@ dev/usb/serial/uvisor.c optional uvisor
dev/usb/serial/uvscom.c optional uvscom
dev/usb/serial/usb_serial.c optional ucom | u3g | uark | ubsa | ubser | \
uchcom | ucycom | ufoma | uftdi | \
- ugensa | uipaq | ulpt | umct | \
+ ugensa | uipaq | umcs | umct | \
umodem | umoscom | uplcom | uslcom | \
uvisor | uvscom
#
Copied: stable/8/sys/dev/usb/serial/umcs.c (from r222696, head/sys/dev/usb/serial/umcs.c)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/8/sys/dev/usb/serial/umcs.c Mon Jun 6 20:58:15 2011 (r222777, copy of r222696, head/sys/dev/usb/serial/umcs.c)
@@ -0,0 +1,1075 @@
+/*-
+ * Copyright (c) 2010 Lev Serebryakov <lev at FreeBSD.org>.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * This driver supports several multiport USB-to-RS232 serial adapters driven
+ * by MosChip mos7820 and mos7840, bridge chips.
+ * The adapters are sold under many different brand names.
+ *
+ * Datasheets are available at MosChip www site at
+ * http://www.moschip.com. The datasheets don't contain full
+ * programming information for the chip.
+ *
+ * It is nornal to have only two enabled ports in devices, based on
+ * quad-port mos7840.
+ *
+ */
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/stdint.h>
+#include <sys/stddef.h>
+#include <sys/param.h>
+#include <sys/queue.h>
+#include <sys/types.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/bus.h>
+#include <sys/linker_set.h>
+#include <sys/module.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+#include <sys/condvar.h>
+#include <sys/sysctl.h>
+#include <sys/sx.h>
+#include <sys/unistd.h>
+#include <sys/callout.h>
+#include <sys/malloc.h>
+#include <sys/priv.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbdi.h>
+#include <dev/usb/usbdi_util.h>
+#include <dev/usb/usb_cdc.h>
+#include "usbdevs.h"
+
+#define USB_DEBUG_VAR umcs_debug
+#include <dev/usb/usb_debug.h>
+#include <dev/usb/usb_process.h>
+
+#include <dev/usb/serial/usb_serial.h>
+
+#include <dev/usb/serial/umcs.h>
+
+#define UMCS7840_MODVER 1
+
+#ifdef USB_DEBUG
+static int umcs_debug = 0;
+
+SYSCTL_NODE(_hw_usb, OID_AUTO, umcs, CTLFLAG_RW, 0, "USB umcs quadport serial adapter");
+SYSCTL_INT(_hw_usb_umcs, OID_AUTO, debug, CTLFLAG_RW, &umcs_debug, 0, "Debug level");
+#endif /* USB_DEBUG */
+
+
+/*
+ * Two-port devices (both with 7820 chip and 7840 chip configured as two-port)
+ * have ports 0 and 2, with ports 1 and 3 omitted.
+ * So,PHYSICAL port numbers (indexes) on two-port device will be 0 and 2.
+ * This driver trys to use physical numbers as much as possible.
+ */
+
+/*
+ * Indexed by PHYSICAL port number.
+ * Pack non-regular registers to array to easier if-less access.
+ */
+struct umcs7840_port_registers {
+ uint8_t reg_sp; /* SP register. */
+ uint8_t reg_control; /* CONTROL register. */
+ uint8_t reg_dcr; /* DCR0 register. DCR1 & DCR2 can be
+ * calculated */
+};
+
+static const struct umcs7840_port_registers umcs7840_port_registers[UMCS7840_MAX_PORTS] = {
+ {.reg_sp = MCS7840_DEV_REG_SP1,.reg_control = MCS7840_DEV_REG_CONTROL1,.reg_dcr = MCS7840_DEV_REG_DCR0_1},
+ {.reg_sp = MCS7840_DEV_REG_SP2,.reg_control = MCS7840_DEV_REG_CONTROL2,.reg_dcr = MCS7840_DEV_REG_DCR0_2},
+ {.reg_sp = MCS7840_DEV_REG_SP3,.reg_control = MCS7840_DEV_REG_CONTROL3,.reg_dcr = MCS7840_DEV_REG_DCR0_3},
+ {.reg_sp = MCS7840_DEV_REG_SP4,.reg_control = MCS7840_DEV_REG_CONTROL4,.reg_dcr = MCS7840_DEV_REG_DCR0_4},
+};
+
+enum {
+ UMCS7840_BULK_RD_EP,
+ UMCS7840_BULK_WR_EP,
+ UMCS7840_N_TRANSFERS
+};
+
+struct umcs7840_softc_oneport {
+ struct usb_xfer *sc_xfer[UMCS7840_N_TRANSFERS]; /* Control structures
+ * for two transfers */
+
+ uint8_t sc_lcr; /* local line control register */
+ uint8_t sc_mcr; /* local modem control register */
+ uint8_t sc_lsr; /* local line status register */
+ uint8_t sc_msr; /* local modem status register */
+};
+
+struct umcs7840_softc {
+ struct ucom_super_softc sc_super_ucom;
+ struct ucom_softc sc_ucom[UMCS7840_MAX_PORTS]; /* Need to be continuous
+ * array, so indexed by
+ * LOGICAL port
+ * (subunit) number */
+
+ struct usb_xfer *sc_intr_xfer; /* Interrupt endpoint */
+
+ device_t sc_dev; /* Device for error prints */
+ struct usb_device *sc_udev; /* USB Device for all operations */
+ struct mtx sc_mtx; /* ucom requires this */
+
+ uint8_t sc_driver_done; /* Flag when enumeration is finished */
+
+ uint8_t sc_numports; /* Number of ports (subunits) */
+ struct umcs7840_softc_oneport sc_ports[UMCS7840_MAX_PORTS]; /* Indexed by PHYSICAL
+ * port number. */
+};
+
+/* prototypes */
+static usb_error_t umcs7840_get_reg_sync(struct umcs7840_softc *, uint8_t, uint8_t *);
+static usb_error_t umcs7840_set_reg_sync(struct umcs7840_softc *, uint8_t, uint8_t);
+static usb_error_t umcs7840_get_UART_reg_sync(struct umcs7840_softc *, uint8_t, uint8_t, uint8_t *);
+static usb_error_t umcs7840_set_UART_reg_sync(struct umcs7840_softc *, uint8_t, uint8_t, uint8_t);
+
+static usb_error_t umcs7840_set_baudrate(struct umcs7840_softc *, uint8_t, uint32_t);
+static usb_error_t umcs7840_calc_baudrate(uint32_t rate, uint16_t *, uint8_t *);
+
+static void umcs7840_cfg_get_status(struct ucom_softc *, uint8_t *, uint8_t *);
+static void umcs7840_cfg_set_dtr(struct ucom_softc *, uint8_t);
+static void umcs7840_cfg_set_rts(struct ucom_softc *, uint8_t);
+static void umcs7840_cfg_set_break(struct ucom_softc *, uint8_t);
+static void umcs7840_cfg_param(struct ucom_softc *, struct termios *);
+static void umcs7840_cfg_open(struct ucom_softc *);
+static void umcs7840_cfg_close(struct ucom_softc *);
+
+static int umcs7840_pre_param(struct ucom_softc *, struct termios *);
+
+static void umcs7840_start_read(struct ucom_softc *);
+static void umcs7840_stop_read(struct ucom_softc *);
+
+static void umcs7840_start_write(struct ucom_softc *);
+static void umcs7840_stop_write(struct ucom_softc *);
+
+static void umcs7840_poll(struct ucom_softc *ucom);
+
+static device_probe_t umcs7840_probe;
+static device_attach_t umcs7840_attach;
+static device_detach_t umcs7840_detach;
+
+static usb_callback_t umcs7840_intr_callback;
+static usb_callback_t umcs7840_read_callback1;
+static usb_callback_t umcs7840_read_callback2;
+static usb_callback_t umcs7840_read_callback3;
+static usb_callback_t umcs7840_read_callback4;
+static usb_callback_t umcs7840_write_callback1;
+static usb_callback_t umcs7840_write_callback2;
+static usb_callback_t umcs7840_write_callback3;
+static usb_callback_t umcs7840_write_callback4;
+
+static void umcs7840_read_callbackN(struct usb_xfer *, usb_error_t, uint8_t);
+static void umcs7840_write_callbackN(struct usb_xfer *, usb_error_t, uint8_t);
+
+/* Indexed by LOGICAL port number (subunit), so two-port device uses 0 & 1 */
+static usb_callback_t *umcs7840_rw_callbacks[UMCS7840_MAX_PORTS][UMCS7840_N_TRANSFERS] = {
+ {&umcs7840_read_callback1, &umcs7840_write_callback1},
+ {&umcs7840_read_callback2, &umcs7840_write_callback2},
+ {&umcs7840_read_callback3, &umcs7840_write_callback3},
+ {&umcs7840_read_callback4, &umcs7840_write_callback4},
+};
+
+static const struct usb_config umcs7840_bulk_config_data[UMCS7840_N_TRANSFERS] = {
+ [UMCS7840_BULK_RD_EP] = {
+ .type = UE_BULK,
+ .endpoint = 0x01,
+ .direction = UE_DIR_IN,
+ .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
+ .bufsize = 0, /* use wMaxPacketSize */
+ .callback = &umcs7840_read_callback1,
+ .if_index = 0,
+ },
+
+ [UMCS7840_BULK_WR_EP] = {
+ .type = UE_BULK,
+ .endpoint = 0x02,
+ .direction = UE_DIR_OUT,
+ .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
+ .bufsize = 0, /* use wMaxPacketSize */
+ .callback = &umcs7840_write_callback1,
+ .if_index = 0,
+ },
+};
+
+static const struct usb_config umcs7840_intr_config_data[1] = {
+ [0] = {
+ .type = UE_INTERRUPT,
+ .endpoint = 0x09,
+ .direction = UE_DIR_IN,
+ .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
+ .bufsize = 0, /* use wMaxPacketSize */
+ .callback = &umcs7840_intr_callback,
+ .if_index = 0,
+ },
+};
+
+static struct ucom_callback umcs7840_callback = {
+ .ucom_cfg_get_status = &umcs7840_cfg_get_status,
+
+ .ucom_cfg_set_dtr = &umcs7840_cfg_set_dtr,
+ .ucom_cfg_set_rts = &umcs7840_cfg_set_rts,
+ .ucom_cfg_set_break = &umcs7840_cfg_set_break,
+
+ .ucom_cfg_param = &umcs7840_cfg_param,
+ .ucom_cfg_open = &umcs7840_cfg_open,
+ .ucom_cfg_close = &umcs7840_cfg_close,
+
+ .ucom_pre_param = &umcs7840_pre_param,
+
+ .ucom_start_read = &umcs7840_start_read,
+ .ucom_stop_read = &umcs7840_stop_read,
+
+ .ucom_start_write = &umcs7840_start_write,
+ .ucom_stop_write = &umcs7840_stop_write,
+
+ .ucom_poll = &umcs7840_poll,
+};
+
+static const struct usb_device_id umcs7840_devs[] = {
+ {USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7820, 0)},
+ {USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7840, 0)},
+};
+
+static device_method_t umcs7840_methods[] = {
+ DEVMETHOD(device_probe, umcs7840_probe),
+ DEVMETHOD(device_attach, umcs7840_attach),
+ DEVMETHOD(device_detach, umcs7840_detach),
+ {0, 0}
+};
+
+static devclass_t umcs7840_devclass;
+
+static driver_t umcs7840_driver = {
+ .name = "umcs7840",
+ .methods = umcs7840_methods,
+ .size = sizeof(struct umcs7840_softc),
+};
+
+DRIVER_MODULE(umcs7840, uhub, umcs7840_driver, umcs7840_devclass, 0, 0);
+MODULE_DEPEND(umcs7840, ucom, 1, 1, 1);
+MODULE_DEPEND(umcs7840, usb, 1, 1, 1);
+MODULE_VERSION(umcs7840, UMCS7840_MODVER);
+
+static int
+umcs7840_probe(device_t dev)
+{
+ struct usb_attach_arg *uaa = device_get_ivars(dev);
+
+ if (uaa->usb_mode != USB_MODE_HOST)
+ return (ENXIO);
+ if (uaa->info.bConfigIndex != MCS7840_CONFIG_INDEX)
+ return (ENXIO);
+ if (uaa->info.bIfaceIndex != MCS7840_IFACE_INDEX)
+ return (ENXIO);
+ return (usbd_lookup_id_by_uaa(umcs7840_devs, sizeof(umcs7840_devs), uaa));
+}
+
+static int
+umcs7840_attach(device_t dev)
+{
+ struct usb_config umcs7840_config_tmp[UMCS7840_N_TRANSFERS];
+ struct usb_attach_arg *uaa = device_get_ivars(dev);
+ struct umcs7840_softc *sc = device_get_softc(dev);
+
+ uint8_t iface_index = MCS7840_IFACE_INDEX;
+ int error;
+ int subunit;
+ int n;
+ uint8_t data;
+
+ for (n = 0; n < UMCS7840_N_TRANSFERS; ++n)
+ umcs7840_config_tmp[n] = umcs7840_bulk_config_data[n];
+
+ device_set_usb_desc(dev);
+ mtx_init(&sc->sc_mtx, "umcs7840", NULL, MTX_DEF);
+
+ sc->sc_dev = dev;
+ sc->sc_udev = uaa->device;
+
+ /*
+ * Get number of ports
+ * Documentation (full datasheet) says, that number of ports is
+ * set as MCS7840_DEV_MODE_SELECT24S bit in MODE R/Only
+ * register. But vendor driver uses these undocumented
+ * register & bit.
+ *
+ * Experiments show, that MODE register can have `0'
+ * (4 ports) bit on 2-port device, so use vendor driver's way.
+ *
+ * Also, see notes in header file for these constants.
+ */
+ umcs7840_get_reg_sync(sc, MCS7840_DEV_REG_GPIO, &data);
+ if (data & MCS7840_DEV_GPIO_4PORTS) {
+ sc->sc_numports = 4;
+ /* Store physical port numbers in sc_portno */
+ sc->sc_ucom[0].sc_portno = 0;
+ sc->sc_ucom[1].sc_portno = 1;
+ sc->sc_ucom[2].sc_portno = 2;
+ sc->sc_ucom[3].sc_portno = 3;
+ } else {
+ sc->sc_numports = 2;
+ /* Store physical port numbers in sc_portno */
+ sc->sc_ucom[0].sc_portno = 0;
+ sc->sc_ucom[1].sc_portno = 2; /* '1' is skipped */
+ }
+ device_printf(dev, "Chip mcs%04x, found %d active ports\n", uaa->info.idProduct, sc->sc_numports);
+ if (!umcs7840_get_reg_sync(sc, MCS7840_DEV_REG_MODE, &data)) {
+ device_printf(dev, "On-die confguration: RST: active %s, HRD: %s, PLL: %s, POR: %s, Ports: %s, EEPROM write %s, IrDA is %savailable\n",
+ (data & MCS7840_DEV_MODE_RESET) ? "low" : "high",
+ (data & MCS7840_DEV_MODE_SER_PRSNT) ? "yes" : "no",
+ (data & MCS7840_DEV_MODE_PLLBYPASS) ? "bypassed" : "avail",
+ (data & MCS7840_DEV_MODE_PORBYPASS) ? "bypassed" : "avail",
+ (data & MCS7840_DEV_MODE_SELECT24S) ? "2" : "4",
+ (data & MCS7840_DEV_MODE_EEPROMWR) ? "enabled" : "disabled",
+ (data & MCS7840_DEV_MODE_IRDA) ? "" : "not ");
+ }
+ /* Setup all transfers */
+ for (subunit = 0; subunit < sc->sc_numports; ++subunit) {
+ for (n = 0; n < UMCS7840_N_TRANSFERS; ++n) {
+ /* Set endpoint address */
+ umcs7840_config_tmp[n].endpoint = umcs7840_bulk_config_data[n].endpoint + 2 * sc->sc_ucom[subunit].sc_portno;
+ umcs7840_config_tmp[n].callback = umcs7840_rw_callbacks[subunit][n];
+ }
+ error = usbd_transfer_setup(uaa->device,
+ &iface_index, sc->sc_ports[sc->sc_ucom[subunit].sc_portno].sc_xfer, umcs7840_config_tmp,
+ UMCS7840_N_TRANSFERS, sc, &sc->sc_mtx);
+ if (error) {
+ device_printf(dev, "allocating USB transfers failed for subunit %d of %d\n",
+ subunit + 1, sc->sc_numports);
+ goto detach;
+ }
+ }
+ error = usbd_transfer_setup(uaa->device,
+ &iface_index, &sc->sc_intr_xfer, umcs7840_intr_config_data,
+ 1, sc, &sc->sc_mtx);
+ if (error) {
+ device_printf(dev, "allocating USB transfers failed for interrupt\n");
+ goto detach;
+ }
+ /* clear stall at first run */
+ mtx_lock(&sc->sc_mtx);
+ for (subunit = 0; subunit < sc->sc_numports; ++subunit) {
+ usbd_xfer_set_stall(sc->sc_ports[sc->sc_ucom[subunit].sc_portno].sc_xfer[UMCS7840_BULK_RD_EP]);
+ usbd_xfer_set_stall(sc->sc_ports[sc->sc_ucom[subunit].sc_portno].sc_xfer[UMCS7840_BULK_WR_EP]);
+ }
+ mtx_unlock(&sc->sc_mtx);
+
+ error = ucom_attach(&sc->sc_super_ucom, sc->sc_ucom, sc->sc_numports, sc,
+ &umcs7840_callback, &sc->sc_mtx);
+ if (error)
+ goto detach;
+
+ ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
+
+ return (0);
+
+detach:
+ umcs7840_detach(dev);
+ return (ENXIO);
+}
+
+static int
+umcs7840_detach(device_t dev)
+{
+ struct umcs7840_softc *sc = device_get_softc(dev);
+ int subunit;
+
+ ucom_detach(&sc->sc_super_ucom, sc->sc_ucom);
+
+ for (subunit = 0; subunit < sc->sc_numports; ++subunit)
+ usbd_transfer_unsetup(sc->sc_ports[sc->sc_ucom[subunit].sc_portno].sc_xfer, UMCS7840_N_TRANSFERS);
+ usbd_transfer_unsetup(&sc->sc_intr_xfer, 1);
+
+ mtx_destroy(&sc->sc_mtx);
+ return (0);
+}
+
+static void
+umcs7840_cfg_open(struct ucom_softc *ucom)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint16_t pn = ucom->sc_portno;
+ uint8_t data;
+
+ /* If it very first open, finish global configuration */
+ if (!sc->sc_driver_done) {
+ /*
+ * USB enumeration is finished, pass internal memory to FIFOs
+ * If it is done in the end of "attach", kernel panics.
+ */
+ if (umcs7840_get_reg_sync(sc, MCS7840_DEV_REG_CONTROL1, &data))
+ return;
+ data |= MCS7840_DEV_CONTROL1_DRIVER_DONE;
+ if (umcs7840_set_reg_sync(sc, MCS7840_DEV_REG_CONTROL1, data))
+ return;
+ sc->sc_driver_done = 1;
+ }
+ /* Toggle reset bit on-off */
+ if (umcs7840_get_reg_sync(sc, umcs7840_port_registers[pn].reg_sp, &data))
+ return;
+ data |= MCS7840_DEV_SPx_UART_RESET;
+ if (umcs7840_set_reg_sync(sc, umcs7840_port_registers[pn].reg_sp, data))
+ return;
+ data &= ~MCS7840_DEV_SPx_UART_RESET;
+ if (umcs7840_set_reg_sync(sc, umcs7840_port_registers[pn].reg_sp, data))
+ return;
+
+ /* Set RS-232 mode */
+ if (umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_SCRATCHPAD, MCS7840_UART_SCRATCHPAD_RS232))
+ return;
+
+ /* Disable RX on time of initialization */
+ if (umcs7840_get_reg_sync(sc, umcs7840_port_registers[pn].reg_control, &data))
+ return;
+ data |= MCS7840_DEV_CONTROLx_RX_DISABLE;
+ if (umcs7840_set_reg_sync(sc, umcs7840_port_registers[pn].reg_control, data))
+ return;
+
+ /* Disable all interrupts */
+ if (umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_IER, 0))
+ return;
+
+ /* Reset FIFO -- documented */
+ if (umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_FCR, 0))
+ return;
+ if (umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_FCR,
+ MCS7840_UART_FCR_ENABLE | MCS7840_UART_FCR_FLUSHRHR |
+ MCS7840_UART_FCR_FLUSHTHR | MCS7840_UART_FCR_RTL_1_14))
+ return;
+
+ /* Set 8 bit, no parity, 1 stop bit -- documented */
+ sc->sc_ports[pn].sc_lcr = MCS7840_UART_LCR_DATALEN8 | MCS7840_UART_LCR_STOPB1;
+ if (umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_LCR, sc->sc_ports[pn].sc_lcr))
+ return;
+
+ /*
+ * Enable DTR/RTS on modem control, enable modem interrupts --
+ * documented
+ */
+ sc->sc_ports[pn].sc_mcr = MCS7840_UART_MCR_DTR | MCS7840_UART_MCR_RTS | MCS7840_UART_MCR_IE;
+ if (umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_MCR, sc->sc_ports[pn].sc_mcr))
+ return;
+
+ /* Clearing Bulkin and Bulkout FIFO */
+ if (umcs7840_get_reg_sync(sc, umcs7840_port_registers[pn].reg_sp, &data))
+ return;
+ data |= MCS7840_DEV_SPx_RESET_OUT_FIFO | MCS7840_DEV_SPx_RESET_IN_FIFO;
+ if (umcs7840_set_reg_sync(sc, umcs7840_port_registers[pn].reg_sp, data))
+ return;
+ data &= ~(MCS7840_DEV_SPx_RESET_OUT_FIFO | MCS7840_DEV_SPx_RESET_IN_FIFO);
+ if (umcs7840_set_reg_sync(sc, umcs7840_port_registers[pn].reg_sp, data))
+ return;
+
+ /* Set speed 9600 */
+ if (umcs7840_set_baudrate(sc, pn, 9600))
+ return;
+
+
+ /* Finally enable all interrupts -- documented */
+ /*
+ * Copied from vendor driver, I don't know why we should read LCR
+ * here
+ */
+ if (umcs7840_get_UART_reg_sync(sc, pn, MCS7840_UART_REG_LCR, &sc->sc_ports[pn].sc_lcr))
+ return;
+ if (umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_IER,
+ MCS7840_UART_IER_RXSTAT | MCS7840_UART_IER_MODEM))
+ return;
+
+ /* Enable RX */
+ if (umcs7840_get_reg_sync(sc, umcs7840_port_registers[pn].reg_control, &data))
+ return;
+ data &= ~MCS7840_DEV_CONTROLx_RX_DISABLE;
+ if (umcs7840_set_reg_sync(sc, umcs7840_port_registers[pn].reg_control, data))
+ return;
+
+ /* Read LSR & MSR */
+ if (umcs7840_get_UART_reg_sync(sc, pn, MCS7840_UART_REG_LSR, &sc->sc_ports[pn].sc_lsr))
+ return;
+ if (umcs7840_get_UART_reg_sync(sc, pn, MCS7840_UART_REG_MSR, &sc->sc_ports[pn].sc_msr))
+ return;
+ DPRINTF("Port %d has been opened, LSR=%02x MSR=%02x\n", pn, sc->sc_ports[pn].sc_lsr, sc->sc_ports[pn].sc_msr);
+}
+
+static void
+umcs7840_cfg_close(struct ucom_softc *ucom)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint16_t pn = ucom->sc_portno;
+ uint8_t data;
+
+ umcs7840_stop_read(ucom);
+ umcs7840_stop_write(ucom);
+
+ umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_MCR, 0);
+ umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_IER, 0);
+
+ /* Disable RX */
+ if (umcs7840_get_reg_sync(sc, umcs7840_port_registers[pn].reg_control, &data))
+ return;
+ data |= MCS7840_DEV_CONTROLx_RX_DISABLE;
+ if (umcs7840_set_reg_sync(sc, umcs7840_port_registers[pn].reg_control, data))
+ return;
+ DPRINTF("Port %d has been closed\n", pn);
+}
+
+static void
+umcs7840_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint8_t pn = ucom->sc_portno;
+
+ if (onoff)
+ sc->sc_ports[pn].sc_mcr |= MCS7840_UART_MCR_DTR;
+ else
+ sc->sc_ports[pn].sc_mcr &= ~MCS7840_UART_MCR_DTR;
+
+ umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_MCR, sc->sc_ports[pn].sc_mcr);
+ DPRINTF("Port %d DTR set to: %s\n", pn, onoff ? "on" : "off");
+}
+
+static void
+umcs7840_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint8_t pn = ucom->sc_portno;
+
+ if (onoff)
+ sc->sc_ports[pn].sc_mcr |= MCS7840_UART_MCR_RTS;
+ else
+ sc->sc_ports[pn].sc_mcr &= ~MCS7840_UART_MCR_RTS;
+
+ umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_MCR, sc->sc_ports[pn].sc_mcr);
+ DPRINTF("Port %d RTS set to: %s\n", pn, onoff ? "on" : "off");
+}
+
+static void
+umcs7840_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint8_t pn = ucom->sc_portno;
+
+ if (onoff)
+ sc->sc_ports[pn].sc_lcr |= MCS7840_UART_LCR_BREAK;
+ else
+ sc->sc_ports[pn].sc_lcr &= ~MCS7840_UART_LCR_BREAK;
+
+ umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_LCR, sc->sc_ports[pn].sc_lcr);
+ DPRINTF("Port %d BREAK set to: %s\n", pn, onoff ? "on" : "off");
+}
+
+
+static void
+umcs7840_cfg_param(struct ucom_softc *ucom, struct termios *t)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint8_t pn = ucom->sc_portno;
+ uint8_t lcr = sc->sc_ports[pn].sc_lcr;
+ uint8_t mcr = sc->sc_ports[pn].sc_mcr;
+
+ DPRINTF("Port %d config:\n", pn);
+ if (t->c_cflag & CSTOPB) {
+ DPRINTF(" 2 stop bits\n");
+ lcr |= MCS7840_UART_LCR_STOPB2;
+ } else {
+ lcr |= MCS7840_UART_LCR_STOPB1;
+ DPRINTF(" 1 stop bit\n");
+ }
+
+ lcr &= ~MCS7840_UART_LCR_PARITYMASK;
+ if (t->c_cflag & PARENB) {
+ lcr |= MCS7840_UART_LCR_PARITYON;
+ if (t->c_cflag & PARODD) {
+ lcr = MCS7840_UART_LCR_PARITYODD;
+ DPRINTF(" parity on - odd\n");
+ } else {
+ lcr = MCS7840_UART_LCR_PARITYEVEN;
+ DPRINTF(" parity on - even\n");
+ }
+ } else {
+ lcr &= ~MCS7840_UART_LCR_PARITYON;
+ DPRINTF(" parity off\n");
+ }
+
+ lcr &= ~MCS7840_UART_LCR_DATALENMASK;
+ switch (t->c_cflag & CSIZE) {
+ case CS5:
+ lcr |= MCS7840_UART_LCR_DATALEN5;
+ DPRINTF(" 5 bit\n");
+ break;
+ case CS6:
+ lcr |= MCS7840_UART_LCR_DATALEN6;
+ DPRINTF(" 6 bit\n");
+ break;
+ case CS7:
+ lcr |= MCS7840_UART_LCR_DATALEN7;
+ DPRINTF(" 7 bit\n");
+ break;
+ case CS8:
+ lcr |= MCS7840_UART_LCR_DATALEN8;
+ DPRINTF(" 8 bit\n");
+ break;
+ }
+
+ if (t->c_cflag & CRTSCTS) {
+ mcr |= MCS7840_UART_MCR_CTSRTS;
+ DPRINTF(" CTS/RTS\n");
+ } else
+ mcr &= ~MCS7840_UART_MCR_CTSRTS;
+
+ if (t->c_cflag & (CDTR_IFLOW | CDSR_OFLOW)) {
+ mcr |= MCS7840_UART_MCR_DTRDSR;
+ DPRINTF(" DTR/DSR\n");
+ } else
+ mcr &= ~MCS7840_UART_MCR_DTRDSR;
+
+ sc->sc_ports[pn].sc_lcr = lcr;
+ umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_LCR, sc->sc_ports[pn].sc_lcr);
+ DPRINTF("Port %d LCR=%02x\n", pn, sc->sc_ports[pn].sc_lcr);
+
+ sc->sc_ports[pn].sc_mcr = mcr;
+ umcs7840_set_UART_reg_sync(sc, pn, MCS7840_UART_REG_MCR, sc->sc_ports[pn].sc_mcr);
+ DPRINTF("Port %d MCR=%02x\n", pn, sc->sc_ports[pn].sc_mcr);
+
+ umcs7840_set_baudrate(sc, pn, t->c_ospeed);
+}
+
+
+static int
+umcs7840_pre_param(struct ucom_softc *ucom, struct termios *t)
+{
+ uint8_t clk;
+ uint16_t divisor;
+
+ if (umcs7840_calc_baudrate(t->c_ospeed, &divisor, &clk) || !divisor)
+ return (EINVAL);
+ return (0);
+}
+
+static void
+umcs7840_start_read(struct ucom_softc *ucom)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint8_t pn = ucom->sc_portno;
+
+ /* Start interrupt transfer */
+ usbd_transfer_start(sc->sc_intr_xfer);
+
+ /* Start read transfer */
+ usbd_transfer_start(sc->sc_ports[pn].sc_xfer[UMCS7840_BULK_RD_EP]);
+}
+
+static void
+umcs7840_stop_read(struct ucom_softc *ucom)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint8_t pn = ucom->sc_portno;
+
+ /* Stop read transfer */
+ usbd_transfer_stop(sc->sc_ports[pn].sc_xfer[UMCS7840_BULK_RD_EP]);
+}
+
+static void
+umcs7840_start_write(struct ucom_softc *ucom)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint8_t pn = ucom->sc_portno;
+
+ /* Start interrupt transfer */
+ usbd_transfer_start(sc->sc_intr_xfer);
+
+ /* Start write transfer */
+ usbd_transfer_start(sc->sc_ports[pn].sc_xfer[UMCS7840_BULK_WR_EP]);
+}
+
+static void
+umcs7840_stop_write(struct ucom_softc *ucom)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+ uint8_t pn = ucom->sc_portno;
+
+ /* Stop write transfer */
+ usbd_transfer_stop(sc->sc_ports[pn].sc_xfer[UMCS7840_BULK_WR_EP]);
+}
+
+static void
+umcs7840_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
+{
+ struct umcs7840_softc *sc = ucom->sc_parent;
+
+ *lsr = sc->sc_ports[ucom->sc_portno].sc_lsr;
+ *msr = sc->sc_ports[ucom->sc_portno].sc_msr;
+ DPRINTF("Port %d status: LSR=%02x MSR=%02x\n", ucom->sc_portno, *lsr, *msr);
+}
+
+static void
+umcs7840_intr_callback(struct usb_xfer *xfer, usb_error_t error)
+{
+ struct umcs7840_softc *sc = usbd_xfer_softc(xfer);
+ struct usb_page_cache *pc;
+ uint8_t buf[13];
+ int actlen;
+ int subunit;
+
+ usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
+
+ switch (USB_GET_STATE(xfer)) {
+ case USB_ST_TRANSFERRED:
+ if (actlen == 5 || actlen == 13) {
+ pc = usbd_xfer_get_frame(xfer, 0);
+ usbd_copy_out(pc, 0, buf, actlen);
+ /* Check status of all ports */
+ for (subunit = 0; subunit < sc->sc_numports; ++subunit) {
+ uint8_t pn = sc->sc_ucom[subunit].sc_portno;
+
+ if (buf[pn] & MCS7840_UART_ISR_NOPENDING)
+ continue;
+ DPRINTF("Port %d has pending interrupt: %02x (FIFO: %02x)\n", pn, buf[pn] & MCS7840_UART_ISR_INTMASK, buf[pn] & (~MCS7840_UART_ISR_INTMASK));
+ switch (buf[pn] & MCS7840_UART_ISR_INTMASK) {
+ case MCS7840_UART_ISR_RXERR:
+ case MCS7840_UART_ISR_RXHASDATA:
+ case MCS7840_UART_ISR_RXTIMEOUT:
+ /* Read new LSR */
+ if (umcs7840_get_UART_reg_sync(sc, pn, MCS7840_UART_REG_LSR, &sc->sc_ports[pn].sc_lsr))
+ break; /* Inner switch */
+ ucom_status_change(&sc->sc_ucom[subunit]);
+ /* Inner switch */
+ break;
+ case MCS7840_UART_ISR_TXEMPTY:
+ /* Do nothing */
+ break; /* Inner switch */
+ case MCS7840_UART_ISR_MSCHANGE:
+ /* Read new MSR */
+ if (umcs7840_get_UART_reg_sync(sc, pn, MCS7840_UART_REG_MSR, &sc->sc_ports[pn].sc_msr))
+ break; /* Inner switch */
+ DPRINTF("Port %d: new MSR %02x\n", pn, sc->sc_ports[pn].sc_msr);
+ ucom_status_change(&sc->sc_ucom[subunit]);
+ break;
+ }
+ }
+ } else
+ device_printf(sc->sc_dev, "Invalid interrupt data length %d", actlen);
+ /* FALLTHROUGH */
+ case USB_ST_SETUP:
+tr_setup:
+ usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
+ usbd_transfer_submit(xfer);
+ return;
+
+ default: /* Error */
+ if (error != USB_ERR_CANCELLED) {
+ /* try to clear stall first */
+ usbd_xfer_set_stall(xfer);
+ goto tr_setup;
+ }
+ return;
+ }
+}
+
+static void
+umcs7840_read_callback1(struct usb_xfer *xfer, usb_error_t error)
+{
+ umcs7840_read_callbackN(xfer, error, 0);
+}
+
+static void
+umcs7840_read_callback2(struct usb_xfer *xfer, usb_error_t error)
+{
+ umcs7840_read_callbackN(xfer, error, 1);
+}
+static void
+umcs7840_read_callback3(struct usb_xfer *xfer, usb_error_t error)
+{
+ umcs7840_read_callbackN(xfer, error, 2);
+}
+
+static void
+umcs7840_read_callback4(struct usb_xfer *xfer, usb_error_t error)
+{
+ umcs7840_read_callbackN(xfer, error, 3);
+}
+
+static void
+umcs7840_read_callbackN(struct usb_xfer *xfer, usb_error_t error, uint8_t subunit)
+{
+ struct umcs7840_softc *sc = usbd_xfer_softc(xfer);
+ struct ucom_softc *ucom = &sc->sc_ucom[subunit];
+ struct usb_page_cache *pc;
+ int actlen;
+
+ usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
+
+ DPRINTF("Port %d read, state = %d, data length = %d\n", ucom->sc_portno, USB_GET_STATE(xfer), actlen);
+
+ switch (USB_GET_STATE(xfer)) {
+ case USB_ST_TRANSFERRED:
+ pc = usbd_xfer_get_frame(xfer, 0);
+ ucom_put_data(ucom, pc, 0, actlen);
+ /* FALLTHROUGH */
+ case USB_ST_SETUP:
+tr_setup:
+ usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
+ usbd_transfer_submit(xfer);
+ return;
+
+ default: /* Error */
+ if (error != USB_ERR_CANCELLED) {
+ /* try to clear stall first */
+ usbd_xfer_set_stall(xfer);
+ goto tr_setup;
+ }
+ return;
+ }
+}
+
+static void
+umcs7840_write_callback1(struct usb_xfer *xfer, usb_error_t error)
+{
+ umcs7840_write_callbackN(xfer, error, 0);
+}
+
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
More information about the svn-src-stable
mailing list