svn commit: r199362 - stable/8/sys/dev/ata/chipsets

[Alexander Motin]

Author: mav
Date: Tue Nov 17 12:25:34 2009
New Revision: 199362
URL: http://svn.freebsd.org/changeset/base/199362

Log:
  MFC r198583:
  Add some magic taken from OS X and Linux to support early revision K2
  SATA controllers, like those found on the G5 Xserve.

Modified:
  stable/8/sys/dev/ata/chipsets/ata-serverworks.c
Directory Properties:
  stable/8/sys/   (props changed)
  stable/8/sys/amd64/include/xen/   (props changed)
  stable/8/sys/cddl/contrib/opensolaris/   (props changed)
  stable/8/sys/contrib/dev/acpica/   (props changed)
  stable/8/sys/contrib/pf/   (props changed)
  stable/8/sys/dev/xen/xenpci/   (props changed)
  stable/8/sys/netinet6/   (props changed)

Modified: stable/8/sys/dev/ata/chipsets/ata-serverworks.c
==============================================================================
--- stable/8/sys/dev/ata/chipsets/ata-serverworks.c	Tue Nov 17 12:23:14 2009	(r199361)
+++ stable/8/sys/dev/ata/chipsets/ata-serverworks.c	Tue Nov 17 12:25:34 2009	(r199362)
@@ -41,6 +41,9 @@ __FBSDID("$FreeBSD$");
 #include <sys/sema.h>
 #include <sys/taskqueue.h>
 #include <vm/uma.h>
+#ifdef __powerpc__
+#include <machine/intr_machdep.h>
+#endif
 #include <machine/stdarg.h>
 #include <machine/resource.h>
 #include <machine/bus.h>
@@ -106,6 +109,13 @@ static int
 ata_serverworks_status(device_t dev)
 {
     struct ata_channel *ch = device_get_softc(dev);
+    struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
+
+    /*
+     * Check if this interrupt belongs to our channel.
+     */
+    if (!(ATA_INL(ctlr->r_res2, 0x1f80) & (1 << ch->unit)))
+	return (0);
 
     /*
      * We need to do a 4-byte read on the status reg before the values
@@ -208,8 +218,29 @@ ata_serverworks_ch_attach(device_t dev)
     ch->hw.tf_write = ata_serverworks_tf_write;
 #ifdef __powerpc__
     ch->hw.status = ata_serverworks_status;
+
+    /* Make sure that our interrupt is edge triggered */
+    powerpc_config_intr(bus_get_resource_start(device_get_parent(dev),
+	SYS_RES_IRQ, 0), INTR_TRIGGER_EDGE, INTR_POLARITY_HIGH);
 #endif
 
+    if (ctlr->chip->chipid == ATA_K2) {
+	/*
+	 * The revision 1 K2 SATA controller has interesting bugs. Patch them.
+	 * These magic numbers regulate interrupt delivery in the first few
+	 * cases and are pure magic in the last case.
+	 *
+	 * Values obtained from the Darwin driver.
+	 */
+
+	ATA_IDX_OUTB(ch, ATA_BMSTAT_PORT, 0x04);
+	ATA_IDX_OUTL(ch, ATA_SERROR, 0xffffffff);
+	ATA_IDX_OUTL(ch, ATA_SCONTROL, 0x00000300);
+	ATA_OUTL(ctlr->r_res2, ch_offset + 0x88, 0);
+	ATA_OUTL(ctlr->r_res2, ch_offset + 0x80,
+	    ATA_INL(ctlr->r_res2, ch_offset + 0x80) & ~0x00040000);
+    }
+
     /* chip does not reliably do 64K DMA transfers */
     ch->dma.max_iosize = 64 * DEV_BSIZE;