svn commit: r186267 - stable/6/usr.sbin/fwcontrol
Sean Bruno
sbruno at FreeBSD.org
Wed Dec 17 20:58:23 PST 2008
Author: sbruno
Date: Thu Dec 18 04:58:22 2008
New Revision: 186267
URL: http://svn.freebsd.org/changeset/base/186267
Log:
Approved by: slong (scottl at samsco.org)
Merge and fixups from -current to cleanup fwcontrol
handling and reporting.
The following changesets were already merged. I have noted
the corresponding changeset where the merge by hand occured.
165628 --> 165820
170878 --> 170959
173195 --> 173328
176810 --> 178718
These two changes were not propagated back to stable/6 and are
cosmetic.
173196 white space
173214 dup .Pp sort SEE ALSO
The following checkins implement:
182911
fixups for fwcontrol for multiple firewire boards
add commandline ability to parse multiple arguments
182048
man page cleanups and usage() display updates
185996
add NetBSD compatibility in compile
Modified:
stable/6/usr.sbin/fwcontrol/ (props changed)
stable/6/usr.sbin/fwcontrol/fwcontrol.8
stable/6/usr.sbin/fwcontrol/fwcontrol.c
stable/6/usr.sbin/fwcontrol/fwmpegts.c
Modified: stable/6/usr.sbin/fwcontrol/fwcontrol.8
==============================================================================
--- stable/6/usr.sbin/fwcontrol/fwcontrol.8 Thu Dec 18 04:50:44 2008 (r186266)
+++ stable/6/usr.sbin/fwcontrol/fwcontrol.8 Thu Dec 18 04:58:22 2008 (r186267)
@@ -24,7 +24,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd October 30, 2007
+.Dd September 12, 2008
.Dt FWCONTROL 8
.Os
.Sh NAME
@@ -60,6 +60,7 @@ The following options are available:
.Bl -tag -width indent
.It Fl u Ar bus_num
Specify the FireWire bus number to be operated on.
+The default is bus 0.
.It Fl r
Initiate bus reset.
.It Fl t
@@ -81,11 +82,14 @@ Load hex dump file of the configuration
.It Fl f Ar node
Force specified
.Ar node
-to be the root node on the next bus reset.
+to be the root node on the next bus reset by sending a PHY config packet.
+Valid values are 0 - 63.
.It Fl g Ar gap_count
-Broadcast
+Broadcast new
.Ar gap_count
-by phy_config packet.
+by sending a PHY_config packet.
+By default this value is 63 on all nodes.
+Valid values are 0 - 63.
.It Fl i Ar pri_req
Set the
.Dv PRIORITY_BUDGET
@@ -98,13 +102,18 @@ or
mode for the incoming stream.
Only meaningful in case of and must precede the
.Fl R
-option. If not specified, the program will try to guess. If you get
-an error complaining about "format 0x20", try to force the "mpeg" mode.
+option.
+If not specified, the program will try to guess.
+In case of
+.Dq format 0x20
+error, try to force the
+.Dq mpeg
+mode.
.It Fl R Ar filename
Receive DV or MPEG TS stream and dump it to a file.
-Use Ctrl-C to stop the receiving.
+Use ^C to stop the receiving.
Some DV cameras seem not to send the stream if a bus manager exists.
-If you cannot get the stream, try the following commands:
+If it is impossible to get the stream, try the following commands:
.Bd -literal -offset indent
sysctl hw.firewire.try_bmr=0
fwcontrol -r
@@ -116,14 +125,17 @@ It can be handled by
.Nm libdv
in the
.Fx
-Ports Collection. Resulting MPEG TS stream can be played and sent over a
+Ports Collection.
+Resulting MPEG TS stream can be played and sent over a
network using the VideoLAN
.Nm vlc
-tool in the
+tool in the
.Fx
-Ports Collection. The stream can be piped directly to
+Ports Collection.
+The stream can be piped directly to
.Nm vlc,
-see EXAMPLES.
+see
+.Sx EXAMPLES .
.It Fl S Ar filename
Send a DV file as isochronous stream.
.It Fl m Ar EUI64 | hostname
@@ -161,38 +173,38 @@ with
.Pp
.Dl "fwcontrol -R file.m2t
.Pp
-Receive an MPEG TS stream from a camera producing MPEG transport stream. This
-has been tested with SONY HDR-FX1E camera that produces HD MPEG-2 stream at
-25 Mbps bandwidth.
+Receive an MPEG TS stream from a camera producing MPEG transport stream.
+This has been tested with SONY HDR-FX1E camera that produces HD MPEG-2
+stream at 25 Mbps bandwidth.
.Pp
-To send the stream from the camera over the network using TCP (which supprisingly works better with vlc), you can use
+To send the stream from the camera over the network using TCP (which
+supprisingly works better with vlc), you can use
.Dl "fwcontrol -R - | nc 192.168.10.11 9000
with
.Nm netcat
from ports and to receive the stream, use
.Dl nc -l -p 9000 | vlc -
.Pp
-To netcast via UDP, you need to use
-.Nm buffer
+To netcast via UDP, you need to use
+.Nm buffer
program from ports, since vlc is not fast enough to read UDP packets from
-buffers and thus it experiences dropouts when run directly. The sending side
-can use
+buffers and thus it experiences dropouts when run directly.
+The sending side can use
.Dl "fwcontrol -R - | nc 192.168.10.11 9000
and to receive the stream, use
.Dl nc -l -u -p 9000 | buffer -s 10k -b 1000 -m 20m -p 5 | vlc -
.Pp
-.Pp
For more information on how to work with
.Nm vlc
see its docs.
.Sh SEE ALSO
+.Xr mplayer 1 ,
+.Xr vlc 1 ,
.Xr firewire 4 ,
.Xr fwe 4 ,
.Xr fwip 4 ,
.Xr fwohci 4 ,
-.Xr sbp 4 ,
-.Xr mplayer 1 ,
-.Xr vlc 1
+.Xr sbp 4
.Sh HISTORY
The
.Nm
Modified: stable/6/usr.sbin/fwcontrol/fwcontrol.c
==============================================================================
--- stable/6/usr.sbin/fwcontrol/fwcontrol.c Thu Dec 18 04:50:44 2008 (r186266)
+++ stable/6/usr.sbin/fwcontrol/fwcontrol.c Thu Dec 18 04:58:22 2008 (r186267)
@@ -32,8 +32,10 @@
* SUCH DAMAGE.
*/
+#if defined(__FreeBSD__)
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
+#endif
#include <sys/param.h>
#include <sys/malloc.h>
@@ -42,11 +44,22 @@ __FBSDID("$FreeBSD$");
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
+#if defined(__FreeBSD__)
#include <sys/eui64.h>
#include <dev/firewire/firewire.h>
#include <dev/firewire/iec13213.h>
#include <dev/firewire/fwphyreg.h>
#include <dev/firewire/iec68113.h>
+#elif defined(__NetBSD__)
+#include "eui64.h"
+#include <dev/ieee1394/firewire.h>
+#include <dev/ieee1394/iec13213.h>
+#include <dev/ieee1394/fwphyreg.h>
+#include <dev/ieee1394/iec68113.h>
+#else
+#warning "You need to add support for your OS"
+#endif
+
#include <netinet/in.h>
#include <fcntl.h>
@@ -56,6 +69,8 @@ __FBSDID("$FreeBSD$");
#include <string.h>
#include <sysexits.h>
#include <unistd.h>
+#include <stdint.h>
+#include <stdbool.h>
#include "fwmethods.h"
static void sysctl_set_int(const char *, int);
@@ -64,25 +79,27 @@ static void
usage(void)
{
fprintf(stderr,
- "fwcontrol [-u bus_num] [-rt] [-f node] [-g gap_count] "
- "[-o node] "
- "[-b pri_req] [-c node] [-d node] [-l file] "
- "[-R file] [-S file] [-m target]\n"
+ "%s [-u bus_num] [-prt] [-c node] [-d node] [-o node] [-s node]\n"
+ "\t [-l file] [-g gap_count] [-f force_root ] [-b pri_req]\n"
+ "\t [-M mode] [-R filename] [-S filename] [-m EUI64 | hostname]\n"
"\t-u: specify bus number\n"
- "\t-f: broadcast force_root by phy_config packet\n"
- "\t-g: broadcast gap_count by phy_config packet\n"
- "\t-o: send link-on packet to the node\n"
- "\t-s: write RESET_START register on the node\n"
- "\t-b: set PRIORITY_BUDGET register on all supported nodes\n"
- "\t-c: read configuration ROM\n"
+ "\t-p: Display current PHY register settings\n"
"\t-r: bus reset\n"
"\t-t: read topology map\n"
+ "\t-c: read configuration ROM\n"
"\t-d: hex dump of configuration ROM\n"
+ "\t-o: send link-on packet to the node\n"
+ "\t-s: write RESET_START register on the node\n"
"\t-l: load and parse hex dump file of configuration ROM\n"
+ "\t-g: set gap count\n"
+ "\t-f: force root node\n"
+ "\t-b: set PRIORITY_BUDGET register on all supported nodes\n"
+ "\t-M: specify dv or mpeg\n"
"\t-R: Receive DV or MPEG TS stream\n"
"\t-S: Send DV stream\n"
- "\t-m: set fwmem target\n");
- exit(EX_USAGE);
+ "\t-m: set fwmem target\n"
+ , getprogname() );
+ fprintf(stderr, "\n");
}
static void
@@ -92,18 +109,14 @@ fweui2eui64(const struct fw_eui64 *fweui
*(u_int32_t*)&(eui->octet[4]) = htonl(fweui->lo);
}
-static struct fw_devlstreq *
-get_dev(int fd)
+static void
+get_dev(int fd, struct fw_devlstreq *data)
{
- struct fw_devlstreq *data;
-
- data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq));
if (data == NULL)
- err(1, "malloc");
+ err(EX_SOFTWARE, "%s: data malloc", __func__);
if( ioctl(fd, FW_GDEVLST, data) < 0) {
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
}
- return data;
}
static int
@@ -130,17 +143,25 @@ str2node(int fd, const char *nodestr)
if (eui64_hostton(nodestr, &eui) != 0 && eui64_aton(nodestr, &eui) != 0)
return (-1);
- data = get_dev(fd);
+ data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq));
+ if (data == NULL)
+ err(EX_SOFTWARE, "%s: data malloc", __func__);
+ get_dev(fd,data);
for (i = 0; i < data->info_len; i++) {
fweui2eui64(&data->dev[i].eui, &tmpeui);
if (memcmp(&eui, &tmpeui, sizeof(struct eui64)) == 0) {
node = data->dev[i].dst;
+ if (data != NULL)
+ free(data);
goto gotnode;
}
}
- if (i >= data->info_len)
+ if (i >= data->info_len) {
+ if (data != NULL)
+ free(data);
return (-1);
+ }
gotnode:
if (node < 0 || node > 63)
@@ -158,7 +179,10 @@ list_dev(int fd)
char addr[EUI64_SIZ], hostname[40];
int i;
- data = get_dev(fd);
+ data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq));
+ if (data == NULL)
+ err(EX_SOFTWARE, "%s:data malloc", __func__);
+ get_dev(fd, data);
printf("%d devices (info_len=%d)\n", data->n, data->info_len);
printf("node EUI64 status hostname\n");
for (i = 0; i < data->info_len; i++) {
@@ -184,6 +208,8 @@ read_write_quad(int fd, struct fw_eui64
u_int32_t *qld, res;
asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 16);
+ if (asyreq == NULL)
+ err(EX_SOFTWARE, "%s:asyreq malloc", __func__);
asyreq->req.len = 16;
#if 0
asyreq->req.type = FWASREQNODE;
@@ -206,7 +232,7 @@ read_write_quad(int fd, struct fw_eui64
asyreq->pkt.mode.wreqq.data = htonl(data);
if (ioctl(fd, FW_ASYREQ, asyreq) < 0) {
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
}
res = qld[3];
free(asyreq);
@@ -216,37 +242,56 @@ read_write_quad(int fd, struct fw_eui64
return 0;
}
+/*
+ * Send a PHY Config Packet
+ * ieee 1394a-2005 4.3.4.3
+ *
+ * Message ID Root ID R T Gap Count
+ * 00(2 bits) (6 bits) 1 1 (6 bits)
+ *
+ * if "R" is set, then Root ID will be the next
+ * root node upon the next bus reset.
+ * if "T" is set, then Gap Count will be the
+ * value that all nodes use for their Gap Count
+ * if "R" and "T" are not set, then this message
+ * is either ignored or interpreted as an extended
+ * PHY config Packet as per 1394a-2005 4.3.4.4
+ */
static void
send_phy_config(int fd, int root_node, int gap_count)
{
struct fw_asyreq *asyreq;
asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 12);
+ if (asyreq == NULL)
+ err(EX_SOFTWARE, "%s:asyreq malloc", __func__);
asyreq->req.len = 12;
asyreq->req.type = FWASREQNODE;
asyreq->pkt.mode.ld[0] = 0;
asyreq->pkt.mode.ld[1] = 0;
asyreq->pkt.mode.common.tcode = FWTCODE_PHY;
if (root_node >= 0)
- asyreq->pkt.mode.ld[1] |= (root_node & 0x3f) << 24 | 1 << 23;
+ asyreq->pkt.mode.ld[1] |= ((root_node << 24) | (1 << 23));
if (gap_count >= 0)
- asyreq->pkt.mode.ld[1] |= 1 << 22 | (gap_count & 0x3f) << 16;
+ asyreq->pkt.mode.ld[1] |= ((1 << 22) | (gap_count << 16));
asyreq->pkt.mode.ld[2] = ~asyreq->pkt.mode.ld[1];
printf("send phy_config root_node=%d gap_count=%d\n",
root_node, gap_count);
if (ioctl(fd, FW_ASYREQ, asyreq) < 0)
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
free(asyreq);
}
static void
-send_link_on(int fd, int node)
+link_on(int fd, int node)
{
struct fw_asyreq *asyreq;
asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 12);
+ if (asyreq == NULL)
+ err(EX_SOFTWARE, "%s:asyreq malloc", __func__);
asyreq->req.len = 12;
asyreq->req.type = FWASREQNODE;
asyreq->pkt.mode.common.tcode = FWTCODE_PHY;
@@ -254,7 +299,7 @@ send_link_on(int fd, int node)
asyreq->pkt.mode.ld[2] = ~asyreq->pkt.mode.ld[1];
if (ioctl(fd, FW_ASYREQ, asyreq) < 0)
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
free(asyreq);
}
@@ -264,6 +309,8 @@ reset_start(int fd, int node)
struct fw_asyreq *asyreq;
asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 16);
+ if (asyreq == NULL)
+ err(EX_SOFTWARE, "%s:asyreq malloc", __func__);
asyreq->req.len = 16;
asyreq->req.type = FWASREQNODE;
asyreq->pkt.mode.wreqq.dst = FWLOCALBUS | (node & 0x3f);
@@ -276,7 +323,7 @@ reset_start(int fd, int node)
asyreq->pkt.mode.wreqq.data = htonl(0x1);
if (ioctl(fd, FW_ASYREQ, asyreq) < 0)
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
free(asyreq);
}
@@ -290,7 +337,10 @@ set_pri_req(int fd, u_int32_t pri_req)
u_int32_t max, reg, old;
int i;
- data = get_dev(fd);
+ data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq));
+ if (data == NULL)
+ err(EX_SOFTWARE, "%s:data malloc", __func__);
+ get_dev(fd, data);
#define BUGET_REG 0xf0000218
for (i = 0; i < data->info_len; i++) {
devinfo = &data->dev[i];
@@ -344,7 +394,10 @@ get_crom(int fd, int node, void *crom_bu
int i, error;
struct fw_devlstreq *data;
- data = get_dev(fd);
+ data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq));
+ if (data == NULL)
+ err(EX_SOFTWARE, "%s:data malloc", __func__);
+ get_dev(fd, data);
for (i = 0; i < data->info_len; i++) {
if (data->dev[i].dst == node && data->dev[i].eui.lo != 0)
@@ -360,7 +413,7 @@ get_crom(int fd, int node, void *crom_bu
buf.ptr = crom_buf;
bzero(crom_buf, len);
if ((error = ioctl(fd, FW_GCROM, &buf)) < 0) {
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
}
return error;
@@ -449,7 +502,7 @@ load_crom(char *filename, u_int32_t *p)
int len=1024, i;
if ((file = fopen(filename, "r")) == NULL)
- err(1, "load_crom");
+ err(1, "load_crom %s", filename);
for (i = 0; i < len/(4*8); i ++) {
fscanf(file, DUMP_FORMAT,
p, p+1, p+2, p+3, p+4, p+5, p+6, p+7);
@@ -469,9 +522,9 @@ show_topology_map(int fd)
static const char *speed[] = {"S100", "S200", "S400", "S800"};
tmap = malloc(sizeof(struct fw_topology_map));
if (tmap == NULL)
- return;
+ err(EX_SOFTWARE, "%s:tmap malloc", __func__);
if (ioctl(fd, FW_GTPMAP, tmap) < 0) {
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
}
printf("crc_len: %d generation:%d node_count:%d sid_count:%d\n",
tmap->crc_len, tmap->generation,
@@ -512,7 +565,7 @@ read_phy_registers(int fd, u_int8_t *buf
for (i = 0; i < len; i++) {
reg.addr = offset + i;
if (ioctl(fd, FWOHCI_RDPHYREG, ®) < 0)
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
buf[i] = (u_int8_t) reg.data;
printf("0x%02x ", reg.data);
}
@@ -527,7 +580,7 @@ read_phy_page(int fd, u_int8_t *buf, int
reg.addr = 0x7;
reg.data = ((page & 7) << 5) | (port & 0xf);
if (ioctl(fd, FWOHCI_WRPHYREG, ®) < 0)
- err(1, "ioctl");
+ err(EX_IOERR, "%s: ioctl", __func__);
read_phy_registers(fd, buf, 8, 8);
}
@@ -590,22 +643,16 @@ dump_phy_registers(int fd)
);
}
-static void
-open_dev(int *fd, char *devbase)
+static int
+open_dev(int *fd, char *devname)
{
- char name[256];
- int i;
-
if (*fd < 0) {
- for (i = 0; i < 4; i++) {
- snprintf(name, sizeof(name), "%s.%d", devbase, i);
- if ((*fd = open(name, O_RDWR)) >= 0)
- break;
- }
+ *fd = open(devname, O_RDWR);
if (*fd < 0)
- err(1, "open");
+ return(-1);
}
+ return(0);
}
static void
@@ -625,25 +672,40 @@ detect_recv_fn(int fd, char ich)
u_int32_t *ptr;
struct ciphdr *ciph;
fwmethod *retfn;
+#define RECV_NUM_PACKET 16
+#define RECV_PACKET_SZ 1024
bufreq.rx.nchunk = 8;
- bufreq.rx.npacket = 16;
- bufreq.rx.psize = 1024;
+ bufreq.rx.npacket = RECV_NUM_PACKET;
+ bufreq.rx.psize = RECV_PACKET_SZ;
bufreq.tx.nchunk = 0;
bufreq.tx.npacket = 0;
bufreq.tx.psize = 0;
if (ioctl(fd, FW_SSTBUF, &bufreq) < 0)
- err(1, "ioctl FW_SSTBUF");
+ err(EX_IOERR, "%s: ioctl FW_SSTBUF", __func__);
isoreq.ch = ich & 0x3f;
isoreq.tag = (ich >> 6) & 3;
if (ioctl(fd, FW_SRSTREAM, &isoreq) < 0)
- err(1, "ioctl FW_SRSTREAM");
+ err(EX_IOERR, "%s: ioctl FW_SRSTREAM", __func__);
- buf = (char *)malloc(1024*16);
- len = read(fd, buf, 1024*16);
+ buf = (char *)malloc(RECV_NUM_PACKET * RECV_PACKET_SZ);
+ if (buf == NULL)
+ err(EX_SOFTWARE, "%s:buf malloc", __func__);
+ /*
+ * fwdev.c seems to return EIO on error and
+ * the return value of the last uiomove
+ * on success. For now, checking that the
+ * return is not less than zero should be
+ * sufficient. fwdev.c::fw_read() should
+ * return the total length read, not the value
+ * of the last uiomove().
+ */
+ len = read(fd, buf, RECV_NUM_PACKET * RECV_PACKET_SZ);
+ if (len < 0)
+ err(EX_IOERR, "%s: error reading from device", __func__);
ptr = (u_int32_t *) buf;
ciph = (struct ciphdr *)(ptr + 1);
@@ -666,102 +728,170 @@ detect_recv_fn(int fd, char ich)
int
main(int argc, char **argv)
{
+#define MAX_BOARDS 10
u_int32_t crom_buf[1024/4];
- char devbase[1024] = "/dev/fw0";
- int fd, ch, len=1024;
+ u_int32_t crom_buf_hex[1024/4];
+ char devbase[64];
+ const char *device_string = "/dev/fw";
+ int fd = -1, ch, len=1024;
+ int32_t current_board = 0;
+ /*
+ * If !command_set, then -u will display the nodes for the board.
+ * This emulates the previous behavior when -u is passed by itself
+ */
+ bool command_set = false;
+ bool open_needed = false;
long tmp;
struct fw_eui64 eui;
struct eui64 target;
fwmethod *recvfn = NULL;
-
- fd = -1;
+/*
+ * Holders for which functions
+ * to iterate through
+ */
+ bool display_board_only = false;
+ bool display_crom = false;
+ bool send_bus_reset = false;
+ bool display_crom_hex = false;
+ bool load_crom_from_file = false;
+ bool set_fwmem_target = false;
+ bool dump_topology = false;
+ bool dump_phy_reg = false;
+
+ int32_t priority_budget = -1;
+ int32_t set_root_node = -1;
+ int32_t set_gap_count = -1;
+ int32_t send_link_on = -1;
+ int32_t send_reset_start = -1;
+
+ char *crom_string = NULL;
+ char *crom_string_hex = NULL;
+ char *recv_data = NULL;
+ char *send_data = NULL;
if (argc < 2) {
- open_dev(&fd, devbase);
- list_dev(fd);
+ for (current_board = 0; current_board < MAX_BOARDS; current_board++) {
+ snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board);
+ if (open_dev(&fd, devbase) < 0) {
+ if (current_board == 0) {
+ usage();
+ err(EX_IOERR, "%s: Error opening firewire controller #%d %s",
+ __func__, current_board, devbase);
+ }
+ return(EIO);
+ }
+ list_dev(fd);
+ close(fd);
+ fd = -1;
+ }
}
-
- while ((ch = getopt(argc, argv, "M:f:g:m:o:s:b:prtc:d:l:u:R:S:")) != -1)
+ /*
+ * Parse all command line options, then execute requested operations.
+ */
+ while ((ch = getopt(argc, argv, "M:f:g:m:o:s:b:prtc:d:l:u:R:S:")) != -1) {
switch(ch) {
case 'b':
- tmp = strtol(optarg, NULL, 0);
- if (tmp < 0 || tmp > (long)0xffffffff)
- errx(EX_USAGE, "invalid number: %s", optarg);
- open_dev(&fd, devbase);
- set_pri_req(fd, tmp);
+ priority_budget = strtol(optarg, NULL, 0);
+ if (priority_budget < 0 || priority_budget > INT32_MAX)
+ errx(EX_USAGE, "%s: priority_budget out of range: %s", __func__, optarg);
+ command_set = true;
+ open_needed = true;
+ display_board_only = false;
break;
case 'c':
- open_dev(&fd, devbase);
- tmp = str2node(fd, optarg);
- get_crom(fd, tmp, crom_buf, len);
- show_crom(crom_buf);
+ crom_string = malloc(strlen(optarg)+1);
+ if (crom_string == NULL)
+ err(EX_SOFTWARE, "%s:crom_string malloc", __func__);
+ if ( (strtol(crom_string, NULL, 0) < 0) || strtol(crom_string, NULL, 0) > MAX_BOARDS)
+ errx(EX_USAGE, "%s:Invalid value for node", __func__);
+ strcpy(crom_string, optarg);
+ display_crom = 1;
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 'd':
- open_dev(&fd, devbase);
- tmp = str2node(fd, optarg);
- get_crom(fd, tmp, crom_buf, len);
- dump_crom(crom_buf);
+ crom_string_hex = malloc(strlen(optarg)+1);
+ if (crom_string_hex == NULL)
+ err(EX_SOFTWARE, "%s:crom_string_hex malloc", __func__);
+ strcpy(crom_string_hex, optarg);
+ display_crom_hex = 1;
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 'f':
- tmp = strtol(optarg, NULL, 0);
- open_dev(&fd, devbase);
- send_phy_config(fd, tmp, -1);
+#define MAX_PHY_CONFIG 0x3f
+ set_root_node = strtol(optarg, NULL, 0);
+ if ( (set_root_node < 0) || (set_root_node > MAX_PHY_CONFIG) )
+ errx(EX_USAGE, "%s:set_root_node out of range", __func__);
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 'g':
- tmp = strtol(optarg, NULL, 0);
- open_dev(&fd, devbase);
- send_phy_config(fd, -1, tmp);
+ set_gap_count = strtol(optarg, NULL, 0);
+ if ( (set_gap_count < 0) || (set_gap_count > MAX_PHY_CONFIG) )
+ errx(EX_USAGE, "%s:set_gap_count out of range", __func__);
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 'l':
+ load_crom_from_file = 1;
load_crom(optarg, crom_buf);
- show_crom(crom_buf);
+ command_set = true;
+ display_board_only = false;
break;
case 'm':
- if (eui64_hostton(optarg, &target) != 0 &&
- eui64_aton(optarg, &target) != 0)
- errx(EX_USAGE, "invalid target: %s", optarg);
- eui.hi = ntohl(*(u_int32_t*)&(target.octet[0]));
- eui.lo = ntohl(*(u_int32_t*)&(target.octet[4]));
- sysctl_set_int("hw.firewire.fwmem.eui64_hi", eui.hi);
- sysctl_set_int("hw.firewire.fwmem.eui64_lo", eui.lo);
+ set_fwmem_target = 1;
+ open_needed = 0;
+ command_set = true;
+ display_board_only = false;
+ if (eui64_hostton(optarg, &target) != 0 &&
+ eui64_aton(optarg, &target) != 0)
+ errx(EX_USAGE, "%s: invalid target: %s", __func__, optarg);
break;
case 'o':
- open_dev(&fd, devbase);
- tmp = str2node(fd, optarg);
- send_link_on(fd, tmp);
+ send_link_on = str2node(fd, optarg);
+ if ( (send_link_on < 0) || (send_link_on > MAX_PHY_CONFIG) )
+ errx(EX_USAGE, "%s: node out of range: %s\n",__func__, optarg);
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 'p':
- open_dev(&fd, devbase);
- dump_phy_registers(fd);
+ dump_phy_reg = 1;
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 'r':
- open_dev(&fd, devbase);
- if(ioctl(fd, FW_IBUSRST, &tmp) < 0)
- err(1, "ioctl");
+ send_bus_reset = 1;
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 's':
- open_dev(&fd, devbase);
- tmp = str2node(fd, optarg);
- reset_start(fd, tmp);
+ send_reset_start = str2node(fd, optarg);
+ if ( (send_reset_start < 0) || (send_reset_start > MAX_PHY_CONFIG) )
+ errx(EX_USAGE, "%s: node out of range: %s\n", __func__, optarg);
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 't':
- open_dev(&fd, devbase);
- show_topology_map(fd);
+ dump_topology = 1;
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
case 'u':
- tmp = strtol(optarg, NULL, 0);
- snprintf(devbase, sizeof(devbase), "/dev/fw%ld", tmp);
- if (fd > 0) {
- close(fd);
- fd = -1;
- }
- if (argc == optind) {
- open_dev(&fd, devbase);
- list_dev(fd);
- }
+ if(!command_set)
+ display_board_only = true;
+ current_board = strtol(optarg, NULL, 0);
+ open_needed = true;
break;
-#define TAG (1<<6)
-#define CHANNEL 63
case 'M':
switch (optarg[0]) {
case 'm':
@@ -774,22 +904,186 @@ main(int argc, char **argv)
errx(EX_USAGE, "unrecognized method: %s",
optarg);
}
+ command_set = true;
+ display_board_only = false;
break;
case 'R':
- open_dev(&fd, devbase);
- if (recvfn == NULL) /* guess... */
- recvfn = detect_recv_fn(fd, TAG | CHANNEL);
- close(fd);
- fd = -1;
- open_dev(&fd, devbase);
- (*recvfn)(fd, optarg, TAG | CHANNEL, -1);
+ recv_data = malloc(strlen(optarg)+1);
+ if (recv_data == NULL)
+ err(EX_SOFTWARE, "%s:recv_data malloc", __func__);
+ strcpy(recv_data, optarg);
+ open_needed = false;
+ command_set = true;
+ display_board_only = false;
break;
case 'S':
- open_dev(&fd, devbase);
- dvsend(fd, optarg, TAG | CHANNEL, -1);
+ send_data = malloc(strlen(optarg)+1);
+ if (send_data == NULL)
+ err(EX_SOFTWARE, "%s:send_data malloc", __func__);
+ strcpy(send_data, optarg);
+ open_needed = true;
+ command_set = true;
+ display_board_only = false;
break;
+ case '?':
default:
usage();
+ warnc(EINVAL, "%s: Unknown command line arguments", __func__);
+ return 0;
+ }
+ } /* end while */
+
+ /*
+ * Catch the error case when the user
+ * executes the command with non ''-''
+ * delimited arguments.
+ * Generate the usage() display and exit.
+ */
+ if (!command_set && !display_board_only) {
+ usage();
+ warnc(EINVAL, "%s: Unknown command line arguments", __func__);
+ return 0;
+ }
+
+ /*
+ * If -u <bus_number> is passed, execute
+ * command for that card only.
+ *
+ * If -u <bus_number> is not passed, execute
+ * command for card 0 only.
+ *
+ */
+ if(open_needed){
+ snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board);
+ if (open_dev(&fd, devbase) < 0) {
+ err(EX_IOERR, "%s: Error opening firewire controller #%d %s", __func__, current_board, devbase);
+ }
+ }
+ /*
+ * display the nodes on this board "-u"
+ * only
+ */
+ if (display_board_only)
+ list_dev(fd);
+
+ /*
+ * dump_phy_reg "-p"
+ */
+ if (dump_phy_reg)
+ dump_phy_registers(fd);
+
+ /*
+ * send a BUS_RESET Event "-r"
+ */
+ if (send_bus_reset) {
+ if(ioctl(fd, FW_IBUSRST, &tmp) < 0)
+ err(EX_IOERR, "%s: Ioctl of bus reset failed for %s", __func__, devbase);
+ }
+ /*
+ * Print out the CROM for this node "-c"
+ */
+ if (display_crom) {
+ tmp = str2node(fd, crom_string);
+ get_crom(fd, tmp, crom_buf, len);
+ show_crom(crom_buf);
+ free(crom_string);
+ }
+ /*
+ * Hex Dump the CROM for this node "-d"
+ */
+ if (display_crom_hex) {
+ tmp = str2node(fd, crom_string_hex);
+ get_crom(fd, tmp, crom_buf_hex, len);
+ dump_crom(crom_buf_hex);
+ free(crom_string_hex);
+ }
+ /*
+ * Set Priority Budget to value for this node "-b"
+ */
+ if (priority_budget >= 0)
+ set_pri_req(fd, priority_budget);
+
+ /*
+ * Explicitly set the root node of this bus to value "-f"
+ */
+ if (set_root_node >= 0)
+ send_phy_config(fd, set_root_node, -1);
+
+ /*
+ * Set the gap count for this card/bus "-g"
+ */
+ if (set_gap_count >= 0)
+ send_phy_config(fd, -1, set_gap_count);
+
+ /*
+ * Load a CROM from a file "-l"
+ */
+ if (load_crom_from_file)
+ show_crom(crom_buf);
+ /*
+ * Set the fwmem target for a node to argument "-m"
+ */
+ if (set_fwmem_target) {
+ eui.hi = ntohl(*(u_int32_t*)&(target.octet[0]));
+ eui.lo = ntohl(*(u_int32_t*)&(target.octet[4]));
+#if defined(__FreeBSD__)
+ sysctl_set_int("hw.firewire.fwmem.eui64_hi", eui.hi);
+ sysctl_set_int("hw.firewire.fwmem.eui64_lo", eui.lo);
+#elif defined(__NetBSD__)
+ sysctl_set_int("hw.fwmem.eui64_hi", eui.hi);
+ sysctl_set_int("hw.fwmem.eui64_lo", eui.lo);
+#else
+#warning "You need to add support for your OS"
+#endif
+
+ }
+
+ /*
+ * Send a link on to this board/bus "-o"
+ */
+ if (send_link_on >= 0)
+ link_on(fd, send_link_on);
+
+ /*
+ * Send a reset start to this board/bus "-s"
+ */
+ if (send_reset_start >= 0)
+ reset_start(fd, send_reset_start);
+
+ /*
+ * Dump the node topology for this board/bus "-t"
+ */
+ if (dump_topology)
+ show_topology_map(fd);
+
+ /*
+ * Recieve data file from node "-R"
+ */
+#define TAG (1<<6)
+#define CHANNEL 63
+ if (recv_data != NULL){
+ if (recvfn == NULL) { /* guess... */
+ recvfn = detect_recv_fn(fd, TAG | CHANNEL);
+ close(fd);
}
+ snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board);
+ if (open_dev(&fd, devbase) < 0)
+ err(EX_IOERR, "%s: Error opening firewire controller #%d %s in recv_data\n", __func__, current_board, devbase);
+ (*recvfn)(fd, recv_data, TAG | CHANNEL, -1);
+ free(recv_data);
+ }
+
+ /*
+ * Send data file to node "-S"
+ */
+ if (send_data != NULL){
+ dvsend(fd, send_data, TAG | CHANNEL, -1);
+ free(send_data);
+ }
+
+ if (fd > 0) {
+ close(fd);
+ fd = -1;
+ }
return 0;
}
Modified: stable/6/usr.sbin/fwcontrol/fwmpegts.c
==============================================================================
--- stable/6/usr.sbin/fwcontrol/fwmpegts.c Thu Dec 18 04:50:44 2008 (r186266)
+++ stable/6/usr.sbin/fwcontrol/fwmpegts.c Thu Dec 18 04:58:22 2008 (r186267)
@@ -52,8 +52,16 @@
#include <string.h>
#include <sysexits.h>
+#if defined(__FreeBSD__)
#include <dev/firewire/firewire.h>
#include <dev/firewire/iec68113.h>
+#elif defined(__NetBSD__)
+#include <dev/ieee1394/firewire.h>
+#include <dev/ieee1394/iec68113.h>
+#else
+#warning "You need to add support for your OS"
+#endif
+
#include "fwmethods.h"
More information about the svn-src-stable
mailing list