svn commit: r286035 - in stable/9/contrib/llvm: include/llvm/CodeGen lib/CodeGen/SelectionDAG lib/Target/X86 patches
Dimitry Andric
dim at FreeBSD.org
Wed Jul 29 19:37:34 UTC 2015
Author: dim
Date: Wed Jul 29 19:37:32 2015
New Revision: 286035
URL: https://svnweb.freebsd.org/changeset/base/286035
Log:
Merge r286033 from stable/10:
Reapply r286007, modified to compile with pre-C++11 compilers:
Pull in r219009 from upstream llvm trunk (by Adam Nemet):
[ISel] Keep matching state consistent when folding during X86 address match
In the X86 backend, matching an address is initiated by the 'addr' complex
pattern and its friends. During this process we may reassociate and-of-shift
into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the
shift into the scale of the address.
However as demonstrated by the testcase, this can trigger CSE of not only the
shift and the AND which the code is prepared for but also the underlying load
node. In the testcase this node is sitting in the RecordedNode and MatchScope
data structures of the matcher and becomes a deleted node upon CSE. Returning
from the complex pattern function, we try to access it again hitting an assert
because the node is no longer a load even though this was checked before.
Now obviously changing the DAG this late is bending the rules but I think it
makes sense somewhat. Outside of addresses we prefer and-of-shift because it
may lead to smaller immediates (FoldMaskAndShiftToScale is an even better
example because it create a non-canonical node). We currently don't recognize
addresses during DAGCombiner where arguably this canonicalization should be
performed. On the other hand, having this in the matcher allows us to cover
all the cases where an address can be used in an instruction.
I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for
the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible
for initiating the recursive CSE on users
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it
is not strictly necessary since the shift is hooked into the visited user. Of
course it's safer to keep the DAG consistent at all times (e.g. for accurate
number of uses, etc.).
So rather than changing the fundamentals, I've decided to continue along the
previous patches and detect the CSE. This patch installs a very targeted
DAGUpdateListener for the duration of a complex-pattern match and updates the
matching state accordingly. (Previous patches used HandleSDNode to detect the
CSE but that's not practical here). The listener is only installed on X86.
I tested that there is no measurable overhead due to this while running
through the spec2k BC files with llc. The only thing we pay for is the
creation of the listener. The callback never ever triggers in spec2k since
this is a corner case.
Fixes rdar://problem/18206171
This fixes a possible crash in x86 code generation when compiling recent
llvm/clang trunk sources.
Direct commit to stable/10, since head already has llvm/clang 3.6.1,
which includes this fix.
Reported by: jonathan, theraven
Upstream PR: https://llvm.org/bugs/show_bug.cgi?id=24249
Merge r286034 from stable/10:
Add updated llvm patch corresponding to r286033.
Added:
stable/9/contrib/llvm/patches/patch-r286033-llvm-r219009-x86-codegen-crash.diff
- copied unchanged from r286034, stable/10/contrib/llvm/patches/patch-r286033-llvm-r219009-x86-codegen-crash.diff
Modified:
stable/9/contrib/llvm/include/llvm/CodeGen/SelectionDAGISel.h
stable/9/contrib/llvm/lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
stable/9/contrib/llvm/lib/Target/X86/X86ISelDAGToDAG.cpp
Directory Properties:
stable/9/ (props changed)
stable/9/contrib/ (props changed)
stable/9/contrib/llvm/ (props changed)
Modified: stable/9/contrib/llvm/include/llvm/CodeGen/SelectionDAGISel.h
==============================================================================
--- stable/9/contrib/llvm/include/llvm/CodeGen/SelectionDAGISel.h Wed Jul 29 19:27:57 2015 (r286034)
+++ stable/9/contrib/llvm/include/llvm/CodeGen/SelectionDAGISel.h Wed Jul 29 19:37:32 2015 (r286035)
@@ -238,6 +238,12 @@ public:
const unsigned char *MatcherTable,
unsigned TableSize);
+ /// \brief Return true if complex patterns for this target can mutate the
+ /// DAG.
+ virtual bool ComplexPatternFuncMutatesDAG() const {
+ return false;
+ }
+
private:
// Calls to these functions are generated by tblgen.
Modified: stable/9/contrib/llvm/lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
==============================================================================
--- stable/9/contrib/llvm/lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp Wed Jul 29 19:27:57 2015 (r286034)
+++ stable/9/contrib/llvm/lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp Wed Jul 29 19:37:32 2015 (r286035)
@@ -2345,6 +2345,45 @@ struct MatchScope {
bool HasChainNodesMatched, HasGlueResultNodesMatched;
};
+/// \\brief A DAG update listener to keep the matching state
+/// (i.e. RecordedNodes and MatchScope) uptodate if the target is allowed to
+/// change the DAG while matching. X86 addressing mode matcher is an example
+/// for this.
+class MatchStateUpdater : public SelectionDAG::DAGUpdateListener
+{
+ SmallVectorImpl<std::pair<SDValue, SDNode*> > &RecordedNodes;
+ SmallVectorImpl<MatchScope> &MatchScopes;
+public:
+ MatchStateUpdater(SelectionDAG &DAG,
+ SmallVectorImpl<std::pair<SDValue, SDNode*> > &RN,
+ SmallVectorImpl<MatchScope> &MS) :
+ SelectionDAG::DAGUpdateListener(DAG),
+ RecordedNodes(RN), MatchScopes(MS) { }
+
+ void NodeDeleted(SDNode *N, SDNode *E) {
+ // Some early-returns here to avoid the search if we deleted the node or
+ // if the update comes from MorphNodeTo (MorphNodeTo is the last thing we
+ // do, so it's unnecessary to update matching state at that point).
+ // Neither of these can occur currently because we only install this
+ // update listener during matching a complex patterns.
+ if (!E || E->isMachineOpcode())
+ return;
+ // Performing linear search here does not matter because we almost never
+ // run this code. You'd have to have a CSE during complex pattern
+ // matching.
+ for (SmallVectorImpl<std::pair<SDValue, SDNode*> >::iterator I =
+ RecordedNodes.begin(), IE = RecordedNodes.end(); I != IE; ++I)
+ if (I->first.getNode() == N)
+ I->first.setNode(E);
+
+ for (SmallVectorImpl<MatchScope>::iterator I = MatchScopes.begin(),
+ IE = MatchScopes.end(); I != IE; ++I)
+ for (SmallVector<SDValue, 4>::iterator J = I->NodeStack.begin(),
+ JE = I->NodeStack.end(); J != JE; ++J)
+ if (J->getNode() == N)
+ J->setNode(E);
+ }
+};
}
SDNode *SelectionDAGISel::
@@ -2599,6 +2638,14 @@ SelectCodeCommon(SDNode *NodeToMatch, co
unsigned CPNum = MatcherTable[MatcherIndex++];
unsigned RecNo = MatcherTable[MatcherIndex++];
assert(RecNo < RecordedNodes.size() && "Invalid CheckComplexPat");
+
+ // If target can modify DAG during matching, keep the matching state
+ // consistent.
+ OwningPtr<MatchStateUpdater> MSU;
+ if (ComplexPatternFuncMutatesDAG())
+ MSU.reset(new MatchStateUpdater(*CurDAG, RecordedNodes,
+ MatchScopes));
+
if (!CheckComplexPattern(NodeToMatch, RecordedNodes[RecNo].second,
RecordedNodes[RecNo].first, CPNum,
RecordedNodes))
Modified: stable/9/contrib/llvm/lib/Target/X86/X86ISelDAGToDAG.cpp
==============================================================================
--- stable/9/contrib/llvm/lib/Target/X86/X86ISelDAGToDAG.cpp Wed Jul 29 19:27:57 2015 (r286034)
+++ stable/9/contrib/llvm/lib/Target/X86/X86ISelDAGToDAG.cpp Wed Jul 29 19:37:32 2015 (r286035)
@@ -290,6 +290,13 @@ namespace {
const X86InstrInfo *getInstrInfo() const {
return getTargetMachine().getInstrInfo();
}
+
+ /// \brief Address-mode matching performs shift-of-and to and-of-shift
+ /// reassociation in order to expose more scaled addressing
+ /// opportunities.
+ bool ComplexPatternFuncMutatesDAG() const {
+ return true;
+ }
};
}
Copied: stable/9/contrib/llvm/patches/patch-r286033-llvm-r219009-x86-codegen-crash.diff (from r286034, stable/10/contrib/llvm/patches/patch-r286033-llvm-r219009-x86-codegen-crash.diff)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/9/contrib/llvm/patches/patch-r286033-llvm-r219009-x86-codegen-crash.diff Wed Jul 29 19:37:32 2015 (r286035, copy of r286034, stable/10/contrib/llvm/patches/patch-r286033-llvm-r219009-x86-codegen-crash.diff)
@@ -0,0 +1,217 @@
+Pull in r219009 from upstream llvm trunk (by Adam Nemet):
+
+ [ISel] Keep matching state consistent when folding during X86 address match
+
+ In the X86 backend, matching an address is initiated by the 'addr' complex
+ pattern and its friends. During this process we may reassociate and-of-shift
+ into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the
+ shift into the scale of the address.
+
+ However as demonstrated by the testcase, this can trigger CSE of not only the
+ shift and the AND which the code is prepared for but also the underlying load
+ node. In the testcase this node is sitting in the RecordedNode and MatchScope
+ data structures of the matcher and becomes a deleted node upon CSE. Returning
+ from the complex pattern function, we try to access it again hitting an assert
+ because the node is no longer a load even though this was checked before.
+
+ Now obviously changing the DAG this late is bending the rules but I think it
+ makes sense somewhat. Outside of addresses we prefer and-of-shift because it
+ may lead to smaller immediates (FoldMaskAndShiftToScale is an even better
+ example because it create a non-canonical node). We currently don't recognize
+ addresses during DAGCombiner where arguably this canonicalization should be
+ performed. On the other hand, having this in the matcher allows us to cover
+ all the cases where an address can be used in an instruction.
+
+ I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for
+ the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible
+ for initiating the recursive CSE on users
+ (http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it
+ is not strictly necessary since the shift is hooked into the visited user. Of
+ course it's safer to keep the DAG consistent at all times (e.g. for accurate
+ number of uses, etc.).
+
+ So rather than changing the fundamentals, I've decided to continue along the
+ previous patches and detect the CSE. This patch installs a very targeted
+ DAGUpdateListener for the duration of a complex-pattern match and updates the
+ matching state accordingly. (Previous patches used HandleSDNode to detect the
+ CSE but that's not practical here). The listener is only installed on X86.
+
+ I tested that there is no measurable overhead due to this while running
+ through the spec2k BC files with llc. The only thing we pay for is the
+ creation of the listener. The callback never ever triggers in spec2k since
+ this is a corner case.
+
+ Fixes rdar://problem/18206171
+
+This fixes a possible crash in x86 code generation when compiling recent
+llvm/clang trunk sources.
+
+Introduced here: http://svnweb.freebsd.org/changeset/base/286033
+
+Index: include/llvm/CodeGen/SelectionDAGISel.h
+===================================================================
+--- include/llvm/CodeGen/SelectionDAGISel.h
++++ include/llvm/CodeGen/SelectionDAGISel.h
+@@ -238,6 +238,12 @@ class SelectionDAGISel : public MachineFunctionPas
+ const unsigned char *MatcherTable,
+ unsigned TableSize);
+
++ /// \brief Return true if complex patterns for this target can mutate the
++ /// DAG.
++ virtual bool ComplexPatternFuncMutatesDAG() const {
++ return false;
++ }
++
+ private:
+
+ // Calls to these functions are generated by tblgen.
+Index: lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
+===================================================================
+--- lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
++++ lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
+@@ -2345,6 +2345,45 @@ struct MatchScope {
+ bool HasChainNodesMatched, HasGlueResultNodesMatched;
+ };
+
++/// \\brief A DAG update listener to keep the matching state
++/// (i.e. RecordedNodes and MatchScope) uptodate if the target is allowed to
++/// change the DAG while matching. X86 addressing mode matcher is an example
++/// for this.
++class MatchStateUpdater : public SelectionDAG::DAGUpdateListener
++{
++ SmallVectorImpl<std::pair<SDValue, SDNode*> > &RecordedNodes;
++ SmallVectorImpl<MatchScope> &MatchScopes;
++public:
++ MatchStateUpdater(SelectionDAG &DAG,
++ SmallVectorImpl<std::pair<SDValue, SDNode*> > &RN,
++ SmallVectorImpl<MatchScope> &MS) :
++ SelectionDAG::DAGUpdateListener(DAG),
++ RecordedNodes(RN), MatchScopes(MS) { }
++
++ void NodeDeleted(SDNode *N, SDNode *E) {
++ // Some early-returns here to avoid the search if we deleted the node or
++ // if the update comes from MorphNodeTo (MorphNodeTo is the last thing we
++ // do, so it's unnecessary to update matching state at that point).
++ // Neither of these can occur currently because we only install this
++ // update listener during matching a complex patterns.
++ if (!E || E->isMachineOpcode())
++ return;
++ // Performing linear search here does not matter because we almost never
++ // run this code. You'd have to have a CSE during complex pattern
++ // matching.
++ for (SmallVectorImpl<std::pair<SDValue, SDNode*> >::iterator I =
++ RecordedNodes.begin(), IE = RecordedNodes.end(); I != IE; ++I)
++ if (I->first.getNode() == N)
++ I->first.setNode(E);
++
++ for (SmallVectorImpl<MatchScope>::iterator I = MatchScopes.begin(),
++ IE = MatchScopes.end(); I != IE; ++I)
++ for (SmallVector<SDValue, 4>::iterator J = I->NodeStack.begin(),
++ JE = I->NodeStack.end(); J != JE; ++J)
++ if (J->getNode() == N)
++ J->setNode(E);
++ }
++};
+ }
+
+ SDNode *SelectionDAGISel::
+@@ -2599,6 +2638,14 @@ SelectCodeCommon(SDNode *NodeToMatch, const unsign
+ unsigned CPNum = MatcherTable[MatcherIndex++];
+ unsigned RecNo = MatcherTable[MatcherIndex++];
+ assert(RecNo < RecordedNodes.size() && "Invalid CheckComplexPat");
++
++ // If target can modify DAG during matching, keep the matching state
++ // consistent.
++ OwningPtr<MatchStateUpdater> MSU;
++ if (ComplexPatternFuncMutatesDAG())
++ MSU.reset(new MatchStateUpdater(*CurDAG, RecordedNodes,
++ MatchScopes));
++
+ if (!CheckComplexPattern(NodeToMatch, RecordedNodes[RecNo].second,
+ RecordedNodes[RecNo].first, CPNum,
+ RecordedNodes))
+Index: lib/Target/X86/X86ISelDAGToDAG.cpp
+===================================================================
+--- lib/Target/X86/X86ISelDAGToDAG.cpp
++++ lib/Target/X86/X86ISelDAGToDAG.cpp
+@@ -290,6 +290,13 @@ namespace {
+ const X86InstrInfo *getInstrInfo() const {
+ return getTargetMachine().getInstrInfo();
+ }
++
++ /// \brief Address-mode matching performs shift-of-and to and-of-shift
++ /// reassociation in order to expose more scaled addressing
++ /// opportunities.
++ bool ComplexPatternFuncMutatesDAG() const {
++ return true;
++ }
+ };
+ }
+
+Index: test/CodeGen/X86/addr-mode-matcher.ll
+===================================================================
+--- test/CodeGen/X86/addr-mode-matcher.ll
++++ test/CodeGen/X86/addr-mode-matcher.ll
+@@ -0,0 +1,62 @@
++; RUN: llc < %s | FileCheck %s
++
++; This testcase used to hit an assert during ISel. For details, see the big
++; comment inside the function.
++
++; CHECK-LABEL: foo:
++; The AND should be turned into a subreg access.
++; CHECK-NOT: and
++; The shift (leal) should be folded into the scale of the address in the load.
++; CHECK-NOT: leal
++; CHECK: movl {{.*}},4),
++
++target datalayout = "e-m:o-p:32:32-f64:32:64-f80:128-n8:16:32-S128"
++target triple = "i386-apple-macosx10.6.0"
++
++define void @foo(i32 %a) {
++bb:
++ br label %bb1692
++
++bb1692:
++ %tmp1694 = phi i32 [ 0, %bb ], [ %tmp1745, %bb1692 ]
++ %xor = xor i32 0, %tmp1694
++
++; %load1 = (load (and (shl %xor, 2), 1020))
++ %tmp1701 = shl i32 %xor, 2
++ %tmp1702 = and i32 %tmp1701, 1020
++ %tmp1703 = getelementptr inbounds [1028 x i8]* null, i32 0, i32 %tmp1702
++ %tmp1704 = bitcast i8* %tmp1703 to i32*
++ %load1 = load i32* %tmp1704, align 4
++
++; %load2 = (load (shl (and %xor, 255), 2))
++ %tmp1698 = and i32 %xor, 255
++ %tmp1706 = shl i32 %tmp1698, 2
++ %tmp1707 = getelementptr inbounds [1028 x i8]* null, i32 0, i32 %tmp1706
++ %tmp1708 = bitcast i8* %tmp1707 to i32*
++ %load2 = load i32* %tmp1708, align 4
++
++ %tmp1710 = or i32 %load2, %a
++
++; While matching xor we address-match %load1. The and-of-shift reassocication
++; in address matching transform this into into a shift-of-and and the resuting
++; node becomes identical to %load2. CSE replaces %load1 which leaves its
++; references in MatchScope and RecordedNodes stale.
++ %tmp1711 = xor i32 %load1, %tmp1710
++
++ %tmp1744 = getelementptr inbounds [256 x i32]* null, i32 0, i32 %tmp1711
++ store i32 0, i32* %tmp1744, align 4
++ %tmp1745 = add i32 %tmp1694, 1
++ indirectbr i8* undef, [label %bb1756, label %bb1692]
++
++bb1756:
++ br label %bb2705
++
++bb2705:
++ indirectbr i8* undef, [label %bb5721, label %bb5736]
++
++bb5721:
++ br label %bb2705
++
++bb5736:
++ ret void
++}
More information about the svn-src-stable-9
mailing list