svn commit: r278400 - in stable/9/sys/dev: bge pci

[Marius Strobl]

Author: marius
Date: Sun Feb  8 20:44:50 2015
New Revision: 278400
URL: https://svnweb.freebsd.org/changeset/base/278400

Log:
  MFC: r276299
  
  - Make PCI_QUIRK_MSI_INTX_BUG work by using the ID of the actual PCI device
    for the lookup.
  - For devices affected by PCI_QUIRK_MSI_INTX_BUG, ensure PCIM_CMD_INTxDIS
    is cleared when using MSI/MSI-X.
  - Employ PCI_QUIRK_MSI_INTX_BUG for BCM5714(S)/BCM5715(S)/BCM5780(S) rather
    than clearing PCIM_CMD_INTxDIS unconditionally for all devices in bge(4).

Modified:
  stable/9/sys/dev/bge/if_bge.c
  stable/9/sys/dev/pci/pci.c
Directory Properties:
  stable/9/sys/   (props changed)
  stable/9/sys/dev/   (props changed)

Modified: stable/9/sys/dev/bge/if_bge.c
==============================================================================
--- stable/9/sys/dev/bge/if_bge.c	Sun Feb  8 20:44:44 2015	(r278399)
+++ stable/9/sys/dev/bge/if_bge.c	Sun Feb  8 20:44:50 2015	(r278400)
@@ -1937,11 +1937,9 @@ bge_chipinit(struct bge_softc *sc)
 
 	/*
 	 * Disable memory write invalidate.  Apparently it is not supported
-	 * properly by these devices.  Also ensure that INTx isn't disabled,
-	 * as these chips need it even when using MSI.
+	 * properly by these devices.
 	 */
-	PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD,
-	    PCIM_CMD_INTxDIS | PCIM_CMD_MWIEN, 4);
+	PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, PCIM_CMD_MWIEN, 4);
 
 	/* Set the timer prescaler (always 66 MHz). */
 	CSR_WRITE_4(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ);

Modified: stable/9/sys/dev/pci/pci.c
==============================================================================
--- stable/9/sys/dev/pci/pci.c	Sun Feb  8 20:44:44 2015	(r278399)
+++ stable/9/sys/dev/pci/pci.c	Sun Feb  8 20:44:50 2015	(r278400)
@@ -270,7 +270,7 @@ static const struct pci_quirk pci_quirks
 	{ 0x43851002, PCI_QUIRK_UNMAP_REG,	0x14,	0 },
 
 	/*
-	 * Atheros AR8161/AR8162/E2200 ethernet controller has a bug that
+	 * Atheros AR8161/AR8162/E2200 Ethernet controllers have a bug that
 	 * MSI interrupt does not assert if PCIM_CMD_INTxDIS bit of the
 	 * command register is set.
 	 */
@@ -278,6 +278,17 @@ static const struct pci_quirk pci_quirks
 	{ 0xE0911969, PCI_QUIRK_MSI_INTX_BUG,	0,	0 },
 	{ 0x10901969, PCI_QUIRK_MSI_INTX_BUG,	0,	0 },
 
+	/*
+	 * Broadcom BCM5714(S)/BCM5715(S)/BCM5780(S) Ethernet MACs don't
+	 * issue MSI interrupts with PCIM_CMD_INTxDIS set either.
+	 */
+	{ 0x166814e4, PCI_QUIRK_MSI_INTX_BUG,	0,	0 }, /* BCM5714 */
+	{ 0x166914e4, PCI_QUIRK_MSI_INTX_BUG,	0,	0 }, /* BCM5714S */
+	{ 0x166a14e4, PCI_QUIRK_MSI_INTX_BUG,	0,	0 }, /* BCM5780 */
+	{ 0x166b14e4, PCI_QUIRK_MSI_INTX_BUG,	0,	0 }, /* BCM5780S */
+	{ 0x167814e4, PCI_QUIRK_MSI_INTX_BUG,	0,	0 }, /* BCM5715 */
+	{ 0x167914e4, PCI_QUIRK_MSI_INTX_BUG,	0,	0 }, /* BCM5715S */
+
 	{ 0 }
 };
 
@@ -3567,14 +3578,16 @@ pci_setup_intr(device_t dev, device_t ch
 			mte->mte_handlers++;
 		}
 
-		if (!pci_has_quirk(pci_get_devid(dev),
-		    PCI_QUIRK_MSI_INTX_BUG)) {
-			/*
-			 * Make sure that INTx is disabled if we are
-			 * using MSI/MSIX
-			 */
+		/*
+		 * Make sure that INTx is disabled if we are using MSI/MSI-X,
+		 * unless the device is affected by PCI_QUIRK_MSI_INTX_BUG,
+		 * in which case we "enable" INTx so MSI/MSI-X actually works.
+		 */
+		if (!pci_has_quirk(pci_get_devid(child),
+		    PCI_QUIRK_MSI_INTX_BUG))
 			pci_set_command_bit(dev, child, PCIM_CMD_INTxDIS);
-		}
+		else
+			pci_clear_command_bit(dev, child, PCIM_CMD_INTxDIS);
 	bad:
 		if (error) {
 			(void)bus_generic_teardown_intr(dev, child, irq,