svn commit: r262225 - in stable: 10/sys/dev/pci 9/sys/dev/pci
John Baldwin
jhb at FreeBSD.org
Wed Feb 19 18:34:48 UTC 2014
Author: jhb
Date: Wed Feb 19 18:34:47 2014
New Revision: 262225
URL: http://svnweb.freebsd.org/changeset/base/262225
Log:
MFC 261524,261526,261527:
- Properly set the alignment flags when allocating the initial range for a
BAR. This only really matters when pci_do_realloc_bars is enabled and
the initial allocation of a specific range fails.
- Simplify pci_reserve_map() by calling resource_list_reserve() to allocate
the resource after creating a resource list entry rather than reimplementing
it by hand.
- Add two tunables to ignore certain firmware-assigned resources. These
are mostly useful for debugging.
- hw.pci.clear_bars ignores all firmware-assigned ranges for BARs when
set.
- hw.pci.clear_pcib ignores all firmware-assigned ranges for PCI-PCI
bridge I/O windows when set.
Modified:
stable/9/sys/dev/pci/pci.c
stable/9/sys/dev/pci/pci_pci.c
Directory Properties:
stable/9/sys/ (props changed)
stable/9/sys/dev/ (props changed)
Changes in other areas also in this revision:
Modified:
stable/10/sys/dev/pci/pci.c
stable/10/sys/dev/pci/pci_pci.c
Directory Properties:
stable/10/ (props changed)
Modified: stable/9/sys/dev/pci/pci.c
==============================================================================
--- stable/9/sys/dev/pci/pci.c Wed Feb 19 17:44:59 2014 (r262224)
+++ stable/9/sys/dev/pci/pci.c Wed Feb 19 18:34:47 2014 (r262225)
@@ -345,6 +345,11 @@ SYSCTL_INT(_hw_pci, OID_AUTO, usb_early_
Disable this if you depend on BIOS emulation of USB devices, that is\n\
you use USB devices (like keyboard or mouse) but do not load USB drivers");
+static int pci_clear_bars;
+TUNABLE_INT("hw.pci.clear_bars", &pci_clear_bars);
+SYSCTL_INT(_hw_pci, OID_AUTO, clear_bars, CTLFLAG_RDTUN, &pci_clear_bars, 0,
+ "Ignore firmware-assigned resources for BARs.");
+
static int
pci_has_quirk(uint32_t devid, int quirk)
{
@@ -2675,7 +2680,7 @@ pci_add_map(device_t bus, device_t dev,
struct pci_map *pm;
pci_addr_t base, map, testval;
pci_addr_t start, end, count;
- int barlen, basezero, maprange, mapsize, type;
+ int barlen, basezero, flags, maprange, mapsize, type;
uint16_t cmd;
struct resource *res;
@@ -2781,7 +2786,10 @@ pci_add_map(device_t bus, device_t dev,
}
count = (pci_addr_t)1 << mapsize;
- if (basezero || base == pci_mapbase(testval)) {
+ flags = RF_ALIGNMENT_LOG2(mapsize);
+ if (prefetch)
+ flags |= RF_PREFETCHABLE;
+ if (basezero || base == pci_mapbase(testval) || pci_clear_bars) {
start = 0; /* Let the parent decide. */
end = ~0ul;
} else {
@@ -2797,7 +2805,7 @@ pci_add_map(device_t bus, device_t dev,
* pci_alloc_resource().
*/
res = resource_list_reserve(rl, bus, dev, type, ®, start, end, count,
- prefetch ? RF_PREFETCHABLE : 0);
+ flags);
if (pci_do_realloc_bars && res == NULL && (start != 0 || end != ~0ul)) {
/*
* If the allocation fails, try to allocate a resource for
@@ -2808,7 +2816,7 @@ pci_add_map(device_t bus, device_t dev,
resource_list_delete(rl, type, reg);
resource_list_add(rl, type, reg, 0, ~0ul, count);
res = resource_list_reserve(rl, bus, dev, type, ®, 0, ~0ul,
- count, prefetch ? RF_PREFETCHABLE : 0);
+ count, flags);
}
if (res == NULL) {
/*
@@ -4079,7 +4087,6 @@ pci_reserve_map(device_t dev, device_t c
{
struct pci_devinfo *dinfo = device_get_ivars(child);
struct resource_list *rl = &dinfo->resources;
- struct resource_list_entry *rle;
struct resource *res;
struct pci_map *pm;
pci_addr_t map, testval;
@@ -4152,23 +4159,16 @@ pci_reserve_map(device_t dev, device_t c
* Allocate enough resource, and then write back the
* appropriate BAR for that resource.
*/
- res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child, type, rid,
- start, end, count, flags & ~RF_ACTIVE);
+ resource_list_add(rl, type, *rid, start, end, count);
+ res = resource_list_reserve(rl, dev, child, type, rid, start, end,
+ count, flags & ~RF_ACTIVE);
if (res == NULL) {
+ resource_list_delete(rl, type, *rid);
device_printf(child,
"%#lx bytes of rid %#x res %d failed (%#lx, %#lx).\n",
count, *rid, type, start, end);
goto out;
}
- resource_list_add(rl, type, *rid, start, end, count);
- rle = resource_list_find(rl, type, *rid);
- if (rle == NULL)
- panic("pci_reserve_map: unexpectedly can't find resource.");
- rle->res = res;
- rle->start = rman_get_start(res);
- rle->end = rman_get_end(res);
- rle->count = count;
- rle->flags = RLE_RESERVED;
if (bootverbose)
device_printf(child,
"Lazy allocation of %#lx bytes rid %#x type %d at %#lx\n",
Modified: stable/9/sys/dev/pci/pci_pci.c
==============================================================================
--- stable/9/sys/dev/pci/pci_pci.c Wed Feb 19 17:44:59 2014 (r262224)
+++ stable/9/sys/dev/pci/pci_pci.c Wed Feb 19 18:34:47 2014 (r262225)
@@ -103,6 +103,12 @@ DEFINE_CLASS_0(pcib, pcib_driver, pcib_m
DRIVER_MODULE(pcib, pci, pcib_driver, pcib_devclass, NULL, NULL);
#ifdef NEW_PCIB
+SYSCTL_DECL(_hw_pci);
+
+static int pci_clear_pcib;
+TUNABLE_INT("hw.pci.clear_pcib", &pci_clear_pcib);
+SYSCTL_INT(_hw_pci, OID_AUTO, clear_pcib, CTLFLAG_RDTUN, &pci_clear_pcib, 0,
+ "Clear firmware-assigned resources for PCI-PCI bridge I/O windows.");
/*
* Is a resource from a child device sub-allocated from one of our
@@ -416,6 +422,19 @@ pcib_probe_windows(struct pcib_softc *sc
dev = sc->dev;
+ if (pci_clear_pcib) {
+ pci_write_config(dev, PCIR_IOBASEL_1, 0xff, 1);
+ pci_write_config(dev, PCIR_IOBASEH_1, 0xffff, 2);
+ pci_write_config(dev, PCIR_IOLIMITL_1, 0, 1);
+ pci_write_config(dev, PCIR_IOLIMITH_1, 0, 2);
+ pci_write_config(dev, PCIR_MEMBASE_1, 0xffff, 2);
+ pci_write_config(dev, PCIR_MEMLIMIT_1, 0, 2);
+ pci_write_config(dev, PCIR_PMBASEL_1, 0xffff, 2);
+ pci_write_config(dev, PCIR_PMBASEH_1, 0xffffffff, 4);
+ pci_write_config(dev, PCIR_PMLIMITL_1, 0, 2);
+ pci_write_config(dev, PCIR_PMLIMITH_1, 0, 4);
+ }
+
/* Determine if the I/O port window is implemented. */
val = pci_read_config(dev, PCIR_IOBASEL_1, 1);
if (val == 0) {
More information about the svn-src-stable-9
mailing list