svn commit: r235586 - in stable/9: lib/libutil sbin/hastd
sbin/iscontrol share/man/man5 usr.sbin/ntp/doc
usr.sbin/wpa/hostapd usr.sbin/wpa/wpa_supplicant
Glen Barber
gjb at FreeBSD.org
Fri May 18 01:51:12 UTC 2012
Author: gjb (doc committer)
Date: Fri May 18 01:51:12 2012
New Revision: 235586
URL: http://svn.freebsd.org/changeset/base/235586
Log:
MFC r235337:
General mdoc(7) and typo fixes.
PR: 167804
Modified:
stable/9/lib/libutil/login.conf.5
stable/9/sbin/hastd/hast.conf.5
stable/9/sbin/iscontrol/iscsi.conf.5
stable/9/share/man/man5/device.hints.5
stable/9/share/man/man5/make.conf.5
stable/9/share/man/man5/nsmb.conf.5
stable/9/share/man/man5/portsnap.conf.5
stable/9/share/man/man5/rc.conf.5
stable/9/usr.sbin/ntp/doc/ntp.conf.5
stable/9/usr.sbin/wpa/hostapd/hostapd.conf.5
stable/9/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5
Directory Properties:
stable/9/lib/libutil/ (props changed)
stable/9/sbin/hastd/ (props changed)
stable/9/sbin/iscontrol/ (props changed)
stable/9/share/man/man5/ (props changed)
stable/9/usr.sbin/ntp/ (props changed)
stable/9/usr.sbin/wpa/ (props changed)
stable/9/usr.sbin/wpa/wpa_supplicant/ (props changed)
Modified: stable/9/lib/libutil/login.conf.5
==============================================================================
--- stable/9/lib/libutil/login.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/lib/libutil/login.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -209,7 +209,8 @@ value.
The syntax is the same as for the
.Fl l
argument of
-.Xr cpuset 1 or the word
+.Xr cpuset 1
+or the word
.Ql default .
If set to
.Ql default
Modified: stable/9/sbin/hastd/hast.conf.5
==============================================================================
--- stable/9/sbin/hastd/hast.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/sbin/hastd/hast.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -37,7 +37,7 @@
.Xr hastd 8
daemon and the
.Xr hastctl 8
-utility.
+utility
.Sh DESCRIPTION
The
.Nm
@@ -439,7 +439,7 @@ resource tank {
.Xr gethostname 3 ,
.Xr geom 4 ,
.Xr hastctl 8 ,
-.Xr hastd 8 .
+.Xr hastd 8
.Sh AUTHORS
The
.Nm
Modified: stable/9/sbin/iscontrol/iscsi.conf.5
==============================================================================
--- stable/9/sbin/iscontrol/iscsi.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/sbin/iscontrol/iscsi.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -76,7 +76,7 @@ currently only 1.
is the name by which the target is known, not to be confused with
target address, either obtained via the target administrator, or
from a
-.Em discovery session.
+.Em discovery session .
.It Cm InitiatorName
if not specified, defaults to
.Sy iqn.2005-01.il.ac.huji.cs:
@@ -146,7 +146,7 @@ see
This value can only be reduced.
.It Cm sockbufsize
sets the receiver and transmitter socket buffer size to
-.Em size,
+.Em size ,
in kilobytes.
The default is 128.
.El
Modified: stable/9/share/man/man5/device.hints.5
==============================================================================
--- stable/9/share/man/man5/device.hints.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/share/man/man5/device.hints.5 Fri May 18 01:51:12 2012 (r235586)
@@ -162,7 +162,7 @@ hint.acpi.0.disabled="1"
.Xr kenv 1 ,
.Xr loader.conf 5 ,
.Xr loader 8 ,
-.Xr resource_int_value 9 .
+.Xr resource_int_value 9
.Sh HISTORY
The
.Nm
Modified: stable/9/share/man/man5/make.conf.5
==============================================================================
--- stable/9/share/man/man5/make.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/share/man/man5/make.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -575,7 +575,7 @@ files at build time.
The value should include the full path to the
.Pa .mc
file(s), e.g.,
-.Pa /etc/mail/foo.mc
+.Pa /etc/mail/foo.mc ,
.Pa /etc/mail/bar.mc .
.It Va SENDMAIL_ALIASES
.Pq Vt str
Modified: stable/9/share/man/man5/nsmb.conf.5
==============================================================================
--- stable/9/share/man/man5/nsmb.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/share/man/man5/nsmb.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -96,7 +96,6 @@ Possible keywords may include:
.Bl -tag -width ".Pa /etc/nsmb.conf"
.It Pa /etc/nsmb.conf
The default remote mount-point configuration file.
-.Pa "~/nsmb.conf"
.It Pa ~/nsmb.conf
The user specific remote mount-point configuration file.
.El
Modified: stable/9/share/man/man5/portsnap.conf.5
==============================================================================
--- stable/9/share/man/man5/portsnap.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/share/man/man5/portsnap.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -47,7 +47,8 @@ specifies the source from which snapshot
This is equivalent to the
.Fl s Ar server
option to
-.Xr portsnap 8 , and will be ignored if the command-line
+.Xr portsnap 8 ,
+and will be ignored if the command-line
option is used.
.Pp
A line of the form
@@ -58,7 +59,8 @@ belonging to an RSA keypair which is tru
This is equivalent to the
.Fl k Ar KEY
option to
-.Xr portsnap 8 , and will be ignored if the command-line
+.Xr portsnap 8 ,
+and will be ignored if the command-line
option is used.
.Pp
A line of the form
@@ -68,7 +70,8 @@ snapshot of the ports tree.
This is equivalent to the
.Fl d Ar workdir
option to
-.Xr portsnap 8 , and will be ignored if the command-line option
+.Xr portsnap 8 ,
+and will be ignored if the command-line option
is used.
.Pp
A line of the form
@@ -82,7 +85,8 @@ commands.
This is equivalent to the
.Fl p Ar portsdir
option to
-.Xr portsnap 8 , and will be ignored if the command-line option
+.Xr portsnap 8 ,
+and will be ignored if the command-line option
is used.
.Pp
If more than one line of any of the above forms is included in
Modified: stable/9/share/man/man5/rc.conf.5
==============================================================================
--- stable/9/share/man/man5/rc.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/share/man/man5/rc.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -386,7 +386,7 @@ is used to set the hostname via DHCP,
this variable should be set to an empty string.
If this value remains unset when the system is done booting
your console login will display the default hostname of
-.Dq Amnesiac.
+.Dq Amnesiac .
.It Va nisdomainname
.Pq Vt str
The NIS domain name of this host, or
@@ -1299,6 +1299,7 @@ ifconfig_ed0_name="net0"
ifconfig_net0="inet 192.0.2.1 netmask 0xffffff00"
.Ed
.It Va ipv6_enable
+.Pq Vt bool
This variable is deprecated.
Use
.Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6
@@ -1306,7 +1307,6 @@ and
.Va ipv6_activate_all_interfaces
if necessary.
.Pp
-.Pq Vt bool
If the variable is
.Dq Li YES ,
.Dq Li inet6 accept_rtadv
@@ -1317,12 +1317,12 @@ and the
is defined as
.Dq Li YES .
.It Va ipv6_prefer
+.Pq Vt bool
This variable is deprecated.
Use
.Va ip6addrctl_policy
instead.
.Pp
-.Pq Vt bool
If the variable is
.Dq Li YES ,
the default address selection policy table set by
@@ -3273,9 +3273,10 @@ is enabled, and a
daemon is started for a non-default port, the
.Va "moused_" Ns Ar XXX Ns Va "_flags"
set of options has precedence over and replaces the default
-.Va moused_flags (where
+.Va moused_flags
+(where
.Ar XXX
-is the name of the non-default port, i.e.\&
+is the name of the non-default port, i.e.,\&
.Ar ums0 ) .
By setting
.Va "moused_" Ns Ar XXX Ns Va "_flags"
Modified: stable/9/usr.sbin/ntp/doc/ntp.conf.5
==============================================================================
--- stable/9/usr.sbin/ntp/doc/ntp.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/usr.sbin/ntp/doc/ntp.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -268,7 +268,7 @@ Options:
All packets sent to and received from the server or peer are to
include authentication fields encrypted using the autokey scheme
described in
-.Sx Authentication Options .
+.Sx Authentication Commands .
.It Cm burst
when the server is reachable, send a burst of eight packets
instead of the usual one.
@@ -305,7 +305,7 @@ default is to include no encryption fiel
.It Cm minpoll Ar minpoll
.It Cm maxpoll Ar maxpoll
These options specify the minimum and maximum poll intervals
-for NTP messages, as a power of 2 in seconds
+for NTP messages, as a power of 2 in seconds.
The maximum poll
interval defaults to 10 (1,024 s), but can be increased by the
.Cm maxpoll
@@ -363,7 +363,7 @@ Note that, in order
to avoid accidental or malicious disruption in this mode, both the
server and client should operate using symmetric-key or public-key
authentication as described in
-.Sx Authentication Options .
+.Sx Authentication Commands .
.It Ic manycastserver Ar address ...
This command enables reception of manycast client messages to
the multicast group address(es) (type m) specified.
@@ -376,7 +376,7 @@ Note that, in order to avoid
accidental or malicious disruption in this mode, both the server
and client should operate using symmetric-key or public-key
authentication as described in
-.Sx Authentication Options .
+.Sx Authentication Commands .
.It Ic multicastclient Ar address ...
This command enables reception of multicast server messages to
the multicast group address(es) (type m) specified.
@@ -389,7 +389,7 @@ Note that,
in order to avoid accidental or malicious disruption in this mode,
both the server and client should operate using symmetric-key or
public-key authentication as described in
-.Sx Authentication Options .
+.Sx Authentication Commands .
.El
.Sh Authentication Support
Authentication support allows the NTP client to verify that the
@@ -466,7 +466,7 @@ of these checks and be discarded.
Furthermore, the Autokey scheme requires a
preliminary protocol exchange to obtain
the server certificate, verify its
-credentials and initialize the protocol
+credentials and initialize the protocol.
.Pp
The
.Cm auth
@@ -669,7 +669,7 @@ using the host name, network address and
all of which are bound together by the protocol specifically
to deflect masquerade attacks.
For this reason Autokey
-includes the source and destinatino IP addresses in message digest
+includes the source and destination IP addresses in message digest
computations and so the same addresses must be available
at both the server and client.
For this reason operation
@@ -796,7 +796,7 @@ The certificate extension fields must no
a subject key identifier or a issuer key identifier field;
however, an extended key usage field for a trusted host must
contain the value
-.Cm trustRoot ; .
+.Cm trustRoot .
Other extension fields are ignored.
.Ss Authentication Commands
.Bl -tag -width indent
@@ -1068,10 +1068,11 @@ following form to the file generation se
The first two fields show the date (Modified Julian Day) and time
(seconds and fraction past UTC midnight).
The next field shows the peer
-address in dotted-quad notation, The final message field includes the
+address in dotted-quad notation.
+The final message field includes the
message type and certain ancillary information.
See the
-.Sx Authentication Options
+.Sx Authentication Commands
section for further information.
.It Cm loopstats
Enables recording of loop filter statistics information.
@@ -1155,7 +1156,7 @@ Time in hours since the system was last
.It Packets received Cm 81965
Total number of packets received.
.It Packets processed Cm 0
-Number of packets received in response to previous packets sent
+Number of packets received in response to previous packets sent.
.It Current version Cm 9546
Number of packets matching the current NTP version.
.It Previous version Cm 56
@@ -1461,7 +1462,7 @@ subcommand specifies the minimum average
spacing, while the
.Cm minimum
subcommand specifies the minimum packet spacing.
-Packets that violate these minima are discarded
+Packets that violate these minimum are discarded
and a kiss-o'-death packet returned if enabled.
The default
minimum average and minimum are 5 and 2, respectively.
@@ -1775,7 +1776,7 @@ It is often useful to narrow the range o
servers which can be found by manycast client associations.
Because manycast servers respond only when the client
stratum is equal to or greater than the server stratum,
-primary (stratum 1) servers fill find only primary servers
+primary (stratum 1) servers will find only primary servers
in TTL range, which is probably the most common objective.
However, unless configured otherwise, all manycast clients
in TTL range will eventually find all primary servers
@@ -1955,7 +1956,7 @@ peers remaining.
This value defaults to 1, but can be changed
to any number from 1 to 15.
.It Cm minclock Ar minclock
-The clustering algorithm repeatedly casts out outlyer
+The clustering algorithm repeatedly casts out outerlayer
associations until no more than
.Cm minclock
associations remain.
@@ -1965,7 +1966,7 @@ configured sources.
.It Cm minsane Ar minsane
This is the minimum number of candidates available
to the clock selection algorithm in order to produce
-one or more truechimers for the clustering algorithm.
+one or more true chimers for the clustering algorithm.
If fewer than this number are available, the clock is
undisciplined and allowed to run free.
The default is 1
Modified: stable/9/usr.sbin/wpa/hostapd/hostapd.conf.5
==============================================================================
--- stable/9/usr.sbin/wpa/hostapd/hostapd.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/usr.sbin/wpa/hostapd/hostapd.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -172,7 +172,7 @@ This conversion uses SSID so the PSK cha
used and the SSID is changed.
.It Va wpa_psk_file
Optionally, WPA PSKs can be read from a separate text file (containing a
-list of (PSK,MAC address) pairs.
+list of PSK,MAC address pairs).
.It Va wpa_key_mgmt
Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both).
.It Va wpa_pairwise
Modified: stable/9/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5
==============================================================================
--- stable/9/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5 Fri May 18 01:50:34 2012 (r235585)
+++ stable/9/usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5 Fri May 18 01:51:12 2012 (r235586)
@@ -316,7 +316,7 @@ This can be used to achieve forward secr
If the
.Va dh_file
is in DSA parameters format, it will be automatically converted
-into DH params.
+into DH parameters.
.It Va subject_match
Substring to be matched against the subject of the
authentication server certificate.
@@ -370,7 +370,7 @@ TLS Message Length field in all TLS mess
fragmented.
.It Li sim_min_num_chal=3
can be used to configure EAP-SIM to require three
-challenges (by default, it accepts 2 or 3)
+challenges (by default, it accepts 2 or 3).
.It Li fast_provisioning=1
option enables in-line provisioning of EAP-FAST
credentials (PAC).
More information about the svn-src-stable-9
mailing list