svn commit: r232786 - in stable/9: sbin/ifconfig sbin/ipfw
share/man/man4 sys/conf sys/dev/ath sys/dev/siba
sys/ia64/ia64 sys/mips/rt305x
Gavin Atkinson
gavin at FreeBSD.org
Sat Mar 10 17:47:44 UTC 2012
Author: gavin
Date: Sat Mar 10 17:47:43 2012
New Revision: 232786
URL: http://svn.freebsd.org/changeset/base/232786
Log:
Merge r232250 from head:
Correct capitalization of "Hz" in user-visible text (manpages, printf(),
etc).
Modified:
stable/9/sbin/ifconfig/ifconfig.8
stable/9/sbin/ipfw/ipfw.8
stable/9/share/man/man4/ath.4
stable/9/share/man/man4/net80211.4
stable/9/sys/conf/NOTES
stable/9/sys/dev/ath/if_ath_sysctl.c
stable/9/sys/dev/siba/siba_core.c
stable/9/sys/ia64/ia64/machdep.c
stable/9/sys/mips/rt305x/rt305x_sysctl.c
Directory Properties:
stable/9/sbin/ifconfig/ (props changed)
stable/9/sbin/ipfw/ (props changed)
stable/9/share/man/man4/ (props changed)
stable/9/sys/ (props changed)
stable/9/sys/conf/ (props changed)
Modified: stable/9/sbin/ifconfig/ifconfig.8
==============================================================================
--- stable/9/sbin/ifconfig/ifconfig.8 Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/sbin/ifconfig/ifconfig.8 Sat Mar 10 17:47:43 2012 (r232786)
@@ -1036,7 +1036,7 @@ Enable Dynamic Frequency Selection (DFS)
DFS embodies several facilities including detection of overlapping
radar signals, dynamic transmit power control, and channel selection
according to a least-congested criteria.
-DFS support is mandatory for some 5Ghz frequencies in certain
+DFS support is mandatory for some 5GHz frequencies in certain
locales (e.g. ETSI).
By default DFS is enabled according to the regulatory definitions
specified in /etc/regdomain.xml and the current country code, regdomain,
Modified: stable/9/sbin/ipfw/ipfw.8
==============================================================================
--- stable/9/sbin/ipfw/ipfw.8 Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/sbin/ipfw/ipfw.8 Sat Mar 10 17:47:43 2012 (r232786)
@@ -2233,7 +2233,7 @@ specifies the scheduling algorithm to us
is just a FIFO scheduler (which means that all packets
are stored in the same queue as they arrive to the scheduler).
FIFO has O(1) per-packet time complexity, with very low
-constants (estimate 60-80ns on a 2Ghz desktop machine)
+constants (estimate 60-80ns on a 2GHz desktop machine)
but gives no service guarantees.
.It Cm wf2qp
implements the WF2Q+ algorithm, which is a Weighted Fair Queueing
Modified: stable/9/share/man/man4/ath.4
==============================================================================
--- stable/9/share/man/man4/ath.4 Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/share/man/man4/ath.4 Sat Mar 10 17:47:43 2012 (r232786)
@@ -95,8 +95,8 @@ with transmit speeds appropriate to each
AR5416-class devices are capable of 802.11n operation
but are supported only in legacy modes (802.11a, 11b, 11g).
Most chips also support an Atheros Turbo Mode (TM) that operates in
-the 5Ghz frequency range with 2x the transmit speeds.
-Some chips also support Turbo mode in the 2.4Ghz range with 802.11g
+the 5GHz frequency range with 2x the transmit speeds.
+Some chips also support Turbo mode in the 2.4GHz range with 802.11g
though this support is not presently available due to regulatory requirements.
(Note that Turbo modes are, however,
only interoperable with other Atheros-based devices.)
Modified: stable/9/share/man/man4/net80211.4
==============================================================================
--- stable/9/share/man/man4/net80211.4 Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/share/man/man4/net80211.4 Sat Mar 10 17:47:43 2012 (r232786)
@@ -280,7 +280,7 @@ Return whether or not Dynamic Frequency
DFS embodies several facilities including detection of overlapping
radar signals, dynamic transmit power control, and channel selection
according to a least-congested criteria.
-DFS support is mandatory for some 5Ghz frequencies in certain
+DFS support is mandatory for some 5GHz frequencies in certain
locales (e.g. ETSI).
By default DFS is enabled according to the regulatory definitions
and the current country code, regdomain, and channel.
Modified: stable/9/sys/conf/NOTES
==============================================================================
--- stable/9/sys/conf/NOTES Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/sys/conf/NOTES Sat Mar 10 17:47:43 2012 (r232786)
@@ -2406,11 +2406,11 @@ device cmx
# or
# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
# Specifies the default video capture mode.
-# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
+# This is required for Dual Crystal (28&35MHz) boards where PAL is used
# to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI.
#
# options BKTR_USE_PLL
-# This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz
+# This is required for PAL or SECAM boards with a 28MHz crystal and no 35MHz
# crystal, e.g. some new Bt878 cards.
#
# options BKTR_GPIO_ACCESS
Modified: stable/9/sys/dev/ath/if_ath_sysctl.c
==============================================================================
--- stable/9/sys/dev/ath/if_ath_sysctl.c Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/sys/dev/ath/if_ath_sysctl.c Sat Mar 10 17:47:43 2012 (r232786)
@@ -756,7 +756,7 @@ ath_sysctl_hal_attach(struct ath_softc *
sc->sc_ah->ah_config.ah_ar5416_biasadj = 0;
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "ar5416_biasadj", CTLFLAG_RW,
&sc->sc_ah->ah_config.ah_ar5416_biasadj, 0,
- "Enable 2ghz AR5416 direction sensitivity bias adjust");
+ "Enable 2GHz AR5416 direction sensitivity bias adjust");
sc->sc_ah->ah_config.ah_dma_beacon_response_time = 2;
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "dma_brt", CTLFLAG_RW,
Modified: stable/9/sys/dev/siba/siba_core.c
==============================================================================
--- stable/9/sys/dev/siba/siba_core.c Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/sys/dev/siba/siba_core.c Sat Mar 10 17:47:43 2012 (r232786)
@@ -1207,7 +1207,7 @@ siba_cc_pmu0_pll0_init(struct siba_cc *s
if (((pmu & SIBA_CC_PMUCTL_XF) >> 2) == e->xf)
return;
- DPRINTF(siba, SIBA_DEBUG_PLL, "change PLL value to %u.%03u mhz\n",
+ DPRINTF(siba, SIBA_DEBUG_PLL, "change PLL value to %u.%03u MHz\n",
(xtalfreq / 1000), (xtalfreq % 1000));
KASSERT(siba->siba_chipid == 0x4328 || siba->siba_chipid == 0x5354,
Modified: stable/9/sys/ia64/ia64/machdep.c
==============================================================================
--- stable/9/sys/ia64/ia64/machdep.c Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/sys/ia64/ia64/machdep.c Sat Mar 10 17:47:43 2012 (r232786)
@@ -245,7 +245,7 @@ identifycpu(void)
printf("CPU: %s (", model_name);
if (cpu_freq)
- printf("%u Mhz ", cpu_freq);
+ printf("%u MHz ", cpu_freq);
printf("%s)\n", family_name);
printf(" Origin = \"%s\" Revision = %d\n", vendor, revision);
printf(" Features = 0x%b\n", (u_int32_t) features,
Modified: stable/9/sys/mips/rt305x/rt305x_sysctl.c
==============================================================================
--- stable/9/sys/mips/rt305x/rt305x_sysctl.c Sat Mar 10 17:08:57 2012 (r232785)
+++ stable/9/sys/mips/rt305x/rt305x_sysctl.c Sat Mar 10 17:47:43 2012 (r232786)
@@ -84,7 +84,7 @@ rt305x_sysctl_dump_config(device_t dev)
if ( val & SYSCTL_SYSCFG_BIG_ENDIAN)
printf("\tBig Endian\n");
if ( val & SYSCTL_SYSCFG_CPU_CLK_SEL_384MHZ)
- printf("\tClock is 384Mhz\n");
+ printf("\tClock is 384MHz\n");
printf("\tBoot from %u\n",
((val & SYSCTL_SYSCFG_BOOT_FROM_MASK) >>
SYSCTL_SYSCFG_BOOT_FROM_SHIFT));
@@ -109,7 +109,7 @@ rt305x_sysctl_dump_config(device_t dev)
printf("\tI2S clock is enabled\n");
printf("\tI2S clock is %s\n",
(val & SYSCTL_CLKCFG1_I2S_CLK_SEL_EXT)?
- "external":"internal 15.625Mhz");
+ "external":"internal 15.625MHz");
printf("\tI2S clock divider %u\n",
((val & SYSCTL_CLKCFG1_I2S_CLK_DIV_MASK) >>
SYSCTL_CLKCFG1_I2S_CLK_DIV_SHIFT));
@@ -118,7 +118,7 @@ rt305x_sysctl_dump_config(device_t dev)
printf("\tPCM clock is %s\n",
(val & SYSCTL_CLKCFG1_PCM_CLK_SEL_EXT)?
- "external":"internal 15.625Mhz");
+ "external":"internal 15.625MHz");
printf("\tPCM clock divider %u\n",
((val & SYSCTL_CLKCFG1_PCM_CLK_DIV_MASK) >>
SYSCTL_CLKCFG1_PCM_CLK_DIV_SHIFT));
More information about the svn-src-stable-9
mailing list