svn commit: r237761 - in stable/9/sys/boot/i386: cdboot pxeldr
Andriy Gapon
avg at FreeBSD.org
Fri Jun 29 10:10:17 UTC 2012
Author: avg
Date: Fri Jun 29 10:10:16 2012
New Revision: 237761
URL: http://svn.freebsd.org/changeset/base/237761
Log:
MFC r235219: cdboot, pxeldr: make use of bootargs.h instead of
redefining flag constants
Added:
stable/9/sys/boot/i386/cdboot/cdboot.S
- copied unchanged from r235219, head/sys/boot/i386/cdboot/cdboot.S
Deleted:
stable/9/sys/boot/i386/cdboot/cdboot.s
Modified:
stable/9/sys/boot/i386/cdboot/Makefile
stable/9/sys/boot/i386/pxeldr/Makefile
stable/9/sys/boot/i386/pxeldr/pxeldr.S
Directory Properties:
stable/9/sys/ (props changed)
stable/9/sys/amd64/include/xen/ (props changed)
stable/9/sys/boot/ (props changed)
stable/9/sys/boot/i386/efi/ (props changed)
stable/9/sys/boot/ia64/efi/ (props changed)
stable/9/sys/boot/ia64/ski/ (props changed)
stable/9/sys/boot/powerpc/boot1.chrp/ (props changed)
stable/9/sys/boot/powerpc/ofw/ (props changed)
stable/9/sys/cddl/contrib/opensolaris/ (props changed)
stable/9/sys/conf/ (props changed)
stable/9/sys/contrib/dev/acpica/ (props changed)
stable/9/sys/contrib/octeon-sdk/ (props changed)
stable/9/sys/contrib/pf/ (props changed)
stable/9/sys/contrib/x86emu/ (props changed)
stable/9/sys/dev/ (props changed)
stable/9/sys/dev/e1000/ (props changed)
stable/9/sys/dev/isp/ (props changed)
stable/9/sys/dev/ixgbe/ (props changed)
stable/9/sys/fs/ (props changed)
stable/9/sys/fs/ntfs/ (props changed)
stable/9/sys/modules/ (props changed)
Modified: stable/9/sys/boot/i386/cdboot/Makefile
==============================================================================
--- stable/9/sys/boot/i386/cdboot/Makefile Fri Jun 29 10:08:31 2012 (r237760)
+++ stable/9/sys/boot/i386/cdboot/Makefile Fri Jun 29 10:10:16 2012 (r237761)
@@ -4,7 +4,9 @@ PROG= cdboot
STRIP=
BINMODE=${NOBINMODE}
NO_MAN=
-SRCS= ${PROG}.s
+SRCS= ${PROG}.S
+
+CFLAGS+=-I${.CURDIR}/../common
ORG= 0x7c00
Copied: stable/9/sys/boot/i386/cdboot/cdboot.S (from r235219, head/sys/boot/i386/cdboot/cdboot.S)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/9/sys/boot/i386/cdboot/cdboot.S Fri Jun 29 10:10:16 2012 (r237761, copy of r235219, head/sys/boot/i386/cdboot/cdboot.S)
@@ -0,0 +1,597 @@
+#
+# Copyright (c) 2001 John Baldwin <jhb at FreeBSD.org>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. Neither the name of the author nor the names of any co-contributors
+# may be used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+
+# $FreeBSD$
+
+#
+# This program is a freestanding boot program to load an a.out binary
+# from a CD-ROM booted with no emulation mode as described by the El
+# Torito standard. Due to broken BIOSen that do not load the desired
+# number of sectors, we try to fit this in as small a space as possible.
+#
+# Basically, we first create a set of boot arguments to pass to the loaded
+# binary. Then we attempt to load /boot/loader from the CD we were booted
+# off of.
+#
+
+#include <bootargs.h>
+
+#
+# Memory locations.
+#
+ .set MEM_PAGE_SIZE,0x1000 # memory page size, 4k
+ .set MEM_ARG,0x900 # Arguments at start
+ .set MEM_ARG_BTX,0xa100 # Where we move them to so the
+ # BTX client can see them
+ .set MEM_ARG_SIZE,0x18 # Size of the arguments
+ .set MEM_BTX_ADDRESS,0x9000 # where BTX lives
+ .set MEM_BTX_ENTRY,0x9010 # where BTX starts to execute
+ .set MEM_BTX_OFFSET,MEM_PAGE_SIZE # offset of BTX in the loader
+ .set MEM_BTX_CLIENT,0xa000 # where BTX clients live
+#
+# a.out header fields
+#
+ .set AOUT_TEXT,0x04 # text segment size
+ .set AOUT_DATA,0x08 # data segment size
+ .set AOUT_BSS,0x0c # zero'd BSS size
+ .set AOUT_SYMBOLS,0x10 # symbol table
+ .set AOUT_ENTRY,0x14 # entry point
+ .set AOUT_HEADER,MEM_PAGE_SIZE # size of the a.out header
+#
+# Segment selectors.
+#
+ .set SEL_SDATA,0x8 # Supervisor data
+ .set SEL_RDATA,0x10 # Real mode data
+ .set SEL_SCODE,0x18 # PM-32 code
+ .set SEL_SCODE16,0x20 # PM-16 code
+#
+# BTX constants
+#
+ .set INT_SYS,0x30 # BTX syscall interrupt
+#
+# Constants for reading from the CD.
+#
+ .set ERROR_TIMEOUT,0x80 # BIOS timeout on read
+ .set NUM_RETRIES,3 # Num times to retry
+ .set SECTOR_SIZE,0x800 # size of a sector
+ .set SECTOR_SHIFT,11 # number of place to shift
+ .set BUFFER_LEN,0x100 # number of sectors in buffer
+ .set MAX_READ,0x10000 # max we can read at a time
+ .set MAX_READ_SEC,MAX_READ >> SECTOR_SHIFT
+ .set MEM_READ_BUFFER,0x9000 # buffer to read from CD
+ .set MEM_VOLDESC,MEM_READ_BUFFER # volume descriptor
+ .set MEM_DIR,MEM_VOLDESC+SECTOR_SIZE # Lookup buffer
+ .set VOLDESC_LBA,0x10 # LBA of vol descriptor
+ .set VD_PRIMARY,1 # Primary VD
+ .set VD_END,255 # VD Terminator
+ .set VD_ROOTDIR,156 # Offset of Root Dir Record
+ .set DIR_LEN,0 # Offset of Dir Record length
+ .set DIR_EA_LEN,1 # Offset of EA length
+ .set DIR_EXTENT,2 # Offset of 64-bit LBA
+ .set DIR_SIZE,10 # Offset of 64-bit length
+ .set DIR_NAMELEN,32 # Offset of 8-bit name len
+ .set DIR_NAME,33 # Offset of dir name
+#
+# We expect to be loaded by the BIOS at 0x7c00 (standard boot loader entry
+# point)
+#
+ .code16
+ .globl start
+ .org 0x0, 0x0
+#
+# Program start.
+#
+start: cld # string ops inc
+ xor %ax,%ax # zero %ax
+ mov %ax,%ss # setup the
+ mov $start,%sp # stack
+ mov %ax,%ds # setup the
+ mov %ax,%es # data segments
+ mov %dl,drive # Save BIOS boot device
+ mov $msg_welcome,%si # %ds:(%si) -> welcome message
+ call putstr # display the welcome message
+#
+# Setup the arguments that the loader is expecting from boot[12]
+#
+ mov $msg_bootinfo,%si # %ds:(%si) -> boot args message
+ call putstr # display the message
+ mov $MEM_ARG,%bx # %ds:(%bx) -> boot args
+ mov %bx,%di # %es:(%di) -> boot args
+ xor %eax,%eax # zero %eax
+ mov $(MEM_ARG_SIZE/4),%cx # Size of arguments in 32-bit
+ # dwords
+ rep # Clear the arguments
+ stosl # to zero
+ mov drive,%dl # Store BIOS boot device
+ mov %dl,0x4(%bx) # in kargs->bootdev
+ or $KARGS_FLAGS_CD,0x8(%bx) # kargs->bootflags |=
+ # KARGS_FLAGS_CD
+#
+# Load Volume Descriptor
+#
+ mov $VOLDESC_LBA,%eax # Set LBA of first VD
+load_vd: push %eax # Save %eax
+ mov $1,%dh # One sector
+ mov $MEM_VOLDESC,%ebx # Destination
+ call read # Read it in
+ cmpb $VD_PRIMARY,(%bx) # Primary VD?
+ je have_vd # Yes
+ pop %eax # Prepare to
+ inc %eax # try next
+ cmpb $VD_END,(%bx) # Last VD?
+ jne load_vd # No, read next
+ mov $msg_novd,%si # No VD
+ jmp error # Halt
+have_vd: # Have Primary VD
+#
+# Try to look up the loader binary using the paths in the loader_paths
+# array.
+#
+ mov $loader_paths,%si # Point to start of array
+lookup_path: push %si # Save file name pointer
+ call lookup # Try to find file
+ pop %di # Restore file name pointer
+ jnc lookup_found # Found this file
+ xor %al,%al # Look for next
+ mov $0xffff,%cx # path name by
+ repnz # scanning for
+ scasb # nul char
+ mov %di,%si # Point %si at next path
+ mov (%si),%al # Get first char of next path
+ or %al,%al # Is it double nul?
+ jnz lookup_path # No, try it.
+ mov $msg_failed,%si # Failed message
+ jmp error # Halt
+lookup_found: # Found a loader file
+#
+# Load the binary into the buffer. Due to real mode addressing limitations
+# we have to read it in 64k chunks.
+#
+ mov DIR_SIZE(%bx),%eax # Read file length
+ add $SECTOR_SIZE-1,%eax # Convert length to sectors
+ shr $SECTOR_SHIFT,%eax
+ cmp $BUFFER_LEN,%eax
+ jbe load_sizeok
+ mov $msg_load2big,%si # Error message
+ call error
+load_sizeok: movzbw %al,%cx # Num sectors to read
+ mov DIR_EXTENT(%bx),%eax # Load extent
+ xor %edx,%edx
+ mov DIR_EA_LEN(%bx),%dl
+ add %edx,%eax # Skip extended
+ mov $MEM_READ_BUFFER,%ebx # Read into the buffer
+load_loop: mov %cl,%dh
+ cmp $MAX_READ_SEC,%cl # Truncate to max read size
+ jbe load_notrunc
+ mov $MAX_READ_SEC,%dh
+load_notrunc: sub %dh,%cl # Update count
+ push %eax # Save
+ call read # Read it in
+ pop %eax # Restore
+ add $MAX_READ_SEC,%eax # Update LBA
+ add $MAX_READ,%ebx # Update dest addr
+ jcxz load_done # Done?
+ jmp load_loop # Keep going
+load_done:
+#
+# Turn on the A20 address line
+#
+ call seta20 # Turn A20 on
+#
+# Relocate the loader and BTX using a very lazy protected mode
+#
+ mov $msg_relocate,%si # Display the
+ call putstr # relocation message
+ mov MEM_READ_BUFFER+AOUT_ENTRY,%edi # %edi is the destination
+ mov $(MEM_READ_BUFFER+AOUT_HEADER),%esi # %esi is
+ # the start of the text
+ # segment
+ mov MEM_READ_BUFFER+AOUT_TEXT,%ecx # %ecx = length of the text
+ # segment
+ push %edi # Save entry point for later
+ lgdt gdtdesc # setup our own gdt
+ cli # turn off interrupts
+ mov %cr0,%eax # Turn on
+ or $0x1,%al # protected
+ mov %eax,%cr0 # mode
+ ljmp $SEL_SCODE,$pm_start # long jump to clear the
+ # instruction pre-fetch queue
+ .code32
+pm_start: mov $SEL_SDATA,%ax # Initialize
+ mov %ax,%ds # %ds and
+ mov %ax,%es # %es to a flat selector
+ rep # Relocate the
+ movsb # text segment
+ add $(MEM_PAGE_SIZE - 1),%edi # pad %edi out to a new page
+ and $~(MEM_PAGE_SIZE - 1),%edi # for the data segment
+ mov MEM_READ_BUFFER+AOUT_DATA,%ecx # size of the data segment
+ rep # Relocate the
+ movsb # data segment
+ mov MEM_READ_BUFFER+AOUT_BSS,%ecx # size of the bss
+ xor %eax,%eax # zero %eax
+ add $3,%cl # round %ecx up to
+ shr $2,%ecx # a multiple of 4
+ rep # zero the
+ stosl # bss
+ mov MEM_READ_BUFFER+AOUT_ENTRY,%esi # %esi -> relocated loader
+ add $MEM_BTX_OFFSET,%esi # %esi -> BTX in the loader
+ mov $MEM_BTX_ADDRESS,%edi # %edi -> where BTX needs to go
+ movzwl 0xa(%esi),%ecx # %ecx -> length of BTX
+ rep # Relocate
+ movsb # BTX
+ ljmp $SEL_SCODE16,$pm_16 # Jump to 16-bit PM
+ .code16
+pm_16: mov $SEL_RDATA,%ax # Initialize
+ mov %ax,%ds # %ds and
+ mov %ax,%es # %es to a real mode selector
+ mov %cr0,%eax # Turn off
+ and $~0x1,%al # protected
+ mov %eax,%cr0 # mode
+ ljmp $0,$pm_end # Long jump to clear the
+ # instruction pre-fetch queue
+pm_end: sti # Turn interrupts back on now
+#
+# Copy the BTX client to MEM_BTX_CLIENT
+#
+ xor %ax,%ax # zero %ax and set
+ mov %ax,%ds # %ds and %es
+ mov %ax,%es # to segment 0
+ mov $MEM_BTX_CLIENT,%di # Prepare to relocate
+ mov $btx_client,%si # the simple btx client
+ mov $(btx_client_end-btx_client),%cx # length of btx client
+ rep # Relocate the
+ movsb # simple BTX client
+#
+# Copy the boot[12] args to where the BTX client can see them
+#
+ mov $MEM_ARG,%si # where the args are at now
+ mov $MEM_ARG_BTX,%di # where the args are moving to
+ mov $(MEM_ARG_SIZE/4),%cx # size of the arguments in longs
+ rep # Relocate
+ movsl # the words
+#
+# Save the entry point so the client can get to it later on
+#
+ pop %eax # Restore saved entry point
+ stosl # and add it to the end of
+ # the arguments
+#
+# Now we just start up BTX and let it do the rest
+#
+ mov $msg_jump,%si # Display the
+ call putstr # jump message
+ ljmp $0,$MEM_BTX_ENTRY # Jump to the BTX entry point
+
+#
+# Lookup the file in the path at [SI] from the root directory.
+#
+# Trashes: All but BX
+# Returns: CF = 0 (success), BX = pointer to record
+# CF = 1 (not found)
+#
+lookup: mov $VD_ROOTDIR+MEM_VOLDESC,%bx # Root directory record
+ push %si
+ mov $msg_lookup,%si # Display lookup message
+ call putstr
+ pop %si
+ push %si
+ call putstr
+ mov $msg_lookup2,%si
+ call putstr
+ pop %si
+lookup_dir: lodsb # Get first char of path
+ cmp $0,%al # Are we done?
+ je lookup_done # Yes
+ cmp $'/',%al # Skip path separator.
+ je lookup_dir
+ dec %si # Undo lodsb side effect
+ call find_file # Lookup first path item
+ jnc lookup_dir # Try next component
+ mov $msg_lookupfail,%si # Not found message
+ call putstr
+ stc # Set carry
+ ret
+ jmp error
+lookup_done: mov $msg_lookupok,%si # Success message
+ call putstr
+ clc # Clear carry
+ ret
+
+#
+# Lookup file at [SI] in directory whose record is at [BX].
+#
+# Trashes: All but returns
+# Returns: CF = 0 (success), BX = pointer to record, SI = next path item
+# CF = 1 (not found), SI = preserved
+#
+find_file: mov DIR_EXTENT(%bx),%eax # Load extent
+ xor %edx,%edx
+ mov DIR_EA_LEN(%bx),%dl
+ add %edx,%eax # Skip extended attributes
+ mov %eax,rec_lba # Save LBA
+ mov DIR_SIZE(%bx),%eax # Save size
+ mov %eax,rec_size
+ xor %cl,%cl # Zero length
+ push %si # Save
+ff.namelen: inc %cl # Update length
+ lodsb # Read char
+ cmp $0,%al # Nul?
+ je ff.namedone # Yes
+ cmp $'/',%al # Path separator?
+ jnz ff.namelen # No, keep going
+ff.namedone: dec %cl # Adjust length and save
+ mov %cl,name_len
+ pop %si # Restore
+ff.load: mov rec_lba,%eax # Load LBA
+ mov $MEM_DIR,%ebx # Address buffer
+ mov $1,%dh # One sector
+ call read # Read directory block
+ incl rec_lba # Update LBA to next block
+ff.scan: mov %ebx,%edx # Check for EOF
+ sub $MEM_DIR,%edx
+ cmp %edx,rec_size
+ ja ff.scan.1
+ stc # EOF reached
+ ret
+ff.scan.1: cmpb $0,DIR_LEN(%bx) # Last record in block?
+ je ff.nextblock
+ push %si # Save
+ movzbw DIR_NAMELEN(%bx),%si # Find end of string
+ff.checkver: cmpb $'0',DIR_NAME-1(%bx,%si) # Less than '0'?
+ jb ff.checkver.1
+ cmpb $'9',DIR_NAME-1(%bx,%si) # Greater than '9'?
+ ja ff.checkver.1
+ dec %si # Next char
+ jnz ff.checkver
+ jmp ff.checklen # All numbers in name, so
+ # no version
+ff.checkver.1: movzbw DIR_NAMELEN(%bx),%cx
+ cmp %cx,%si # Did we find any digits?
+ je ff.checkdot # No
+ cmpb $';',DIR_NAME-1(%bx,%si) # Check for semicolon
+ jne ff.checkver.2
+ dec %si # Skip semicolon
+ mov %si,%cx
+ mov %cl,DIR_NAMELEN(%bx) # Adjust length
+ jmp ff.checkdot
+ff.checkver.2: mov %cx,%si # Restore %si to end of string
+ff.checkdot: cmpb $'.',DIR_NAME-1(%bx,%si) # Trailing dot?
+ jne ff.checklen # No
+ decb DIR_NAMELEN(%bx) # Adjust length
+ff.checklen: pop %si # Restore
+ movzbw name_len,%cx # Load length of name
+ cmp %cl,DIR_NAMELEN(%bx) # Does length match?
+ je ff.checkname # Yes, check name
+ff.nextrec: add DIR_LEN(%bx),%bl # Next record
+ adc $0,%bh
+ jmp ff.scan
+ff.nextblock: subl $SECTOR_SIZE,rec_size # Adjust size
+ jnc ff.load # If subtract ok, keep going
+ ret # End of file, so not found
+ff.checkname: lea DIR_NAME(%bx),%di # Address name in record
+ push %si # Save
+ repe cmpsb # Compare name
+ je ff.match # We have a winner!
+ pop %si # Restore
+ jmp ff.nextrec # Keep looking.
+ff.match: add $2,%sp # Discard saved %si
+ clc # Clear carry
+ ret
+
+#
+# Load DH sectors starting at LBA EAX into [EBX].
+#
+# Trashes: EAX
+#
+read: push %si # Save
+ push %cx # Save since some BIOSs trash
+ mov %eax,edd_lba # LBA to read from
+ mov %ebx,%eax # Convert address
+ shr $4,%eax # to segment
+ mov %ax,edd_addr+0x2 # and store
+read.retry: call twiddle # Entertain the user
+ push %dx # Save
+ mov $edd_packet,%si # Address Packet
+ mov %dh,edd_len # Set length
+ mov drive,%dl # BIOS Device
+ mov $0x42,%ah # BIOS: Extended Read
+ int $0x13 # Call BIOS
+ pop %dx # Restore
+ jc read.fail # Worked?
+ pop %cx # Restore
+ pop %si
+ ret # Return
+read.fail: cmp $ERROR_TIMEOUT,%ah # Timeout?
+ je read.retry # Yes, Retry.
+read.error: mov %ah,%al # Save error
+ mov $hex_error,%di # Format it
+ call hex8 # as hex
+ mov $msg_badread,%si # Display Read error message
+
+#
+# Display error message at [SI] and halt.
+#
+error: call putstr # Display message
+halt: hlt
+ jmp halt # Spin
+
+#
+# Display a null-terminated string.
+#
+# Trashes: AX, SI
+#
+putstr: push %bx # Save
+putstr.load: lodsb # load %al from %ds:(%si)
+ test %al,%al # stop at null
+ jnz putstr.putc # if the char != null, output it
+ pop %bx # Restore
+ ret # return when null is hit
+putstr.putc: call putc # output char
+ jmp putstr.load # next char
+
+#
+# Display a single char.
+#
+putc: mov $0x7,%bx # attribute for output
+ mov $0xe,%ah # BIOS: put_char
+ int $0x10 # call BIOS, print char in %al
+ ret # Return to caller
+
+#
+# Output the "twiddle"
+#
+twiddle: push %ax # Save
+ push %bx # Save
+ mov twiddle_index,%al # Load index
+ mov $twiddle_chars,%bx # Address table
+ inc %al # Next
+ and $3,%al # char
+ mov %al,twiddle_index # Save index for next call
+ xlat # Get char
+ call putc # Output it
+ mov $8,%al # Backspace
+ call putc # Output it
+ pop %bx # Restore
+ pop %ax # Restore
+ ret
+
+#
+# Enable A20. Put an upper limit on the amount of time we wait for the
+# keyboard controller to get ready (65K x ISA access time). If
+# we wait more than that amount, the hardware is probably
+# legacy-free and simply doesn't have a keyboard controller.
+# Thus, the A20 line is already enabled.
+#
+seta20: cli # Disable interrupts
+ xor %cx,%cx # Clear
+seta20.1: inc %cx # Increment, overflow?
+ jz seta20.3 # Yes
+ in $0x64,%al # Get status
+ test $0x2,%al # Busy?
+ jnz seta20.1 # Yes
+ mov $0xd1,%al # Command: Write
+ out %al,$0x64 # output port
+seta20.2: in $0x64,%al # Get status
+ test $0x2,%al # Busy?
+ jnz seta20.2 # Yes
+ mov $0xdf,%al # Enable
+ out %al,$0x60 # A20
+seta20.3: sti # Enable interrupts
+ ret # To caller
+
+#
+# Convert AL to hex, saving the result to [EDI].
+#
+hex8: pushl %eax # Save
+ shrb $0x4,%al # Do upper
+ call hex8.1 # 4
+ popl %eax # Restore
+hex8.1: andb $0xf,%al # Get lower 4
+ cmpb $0xa,%al # Convert
+ sbbb $0x69,%al # to hex
+ das # digit
+ orb $0x20,%al # To lower case
+ stosb # Save char
+ ret # (Recursive)
+
+#
+# BTX client to start btxldr
+#
+ .code32
+btx_client: mov $(MEM_ARG_BTX-MEM_BTX_CLIENT+MEM_ARG_SIZE-4), %esi
+ # %ds:(%esi) -> end
+ # of boot[12] args
+ mov $(MEM_ARG_SIZE/4),%ecx # Number of words to push
+ std # Go backwards
+push_arg: lodsl # Read argument
+ push %eax # Push it onto the stack
+ loop push_arg # Push all of the arguments
+ cld # In case anyone depends on this
+ pushl MEM_ARG_BTX-MEM_BTX_CLIENT+MEM_ARG_SIZE # Entry point of
+ # the loader
+ push %eax # Emulate a near call
+ mov $0x1,%eax # 'exec' system call
+ int $INT_SYS # BTX system call
+btx_client_end:
+ .code16
+
+ .p2align 4
+#
+# Global descriptor table.
+#
+gdt: .word 0x0,0x0,0x0,0x0 # Null entry
+ .word 0xffff,0x0,0x9200,0xcf # SEL_SDATA
+ .word 0xffff,0x0,0x9200,0x0 # SEL_RDATA
+ .word 0xffff,0x0,0x9a00,0xcf # SEL_SCODE (32-bit)
+ .word 0xffff,0x0,0x9a00,0x8f # SEL_SCODE16 (16-bit)
+gdt.1:
+#
+# Pseudo-descriptors.
+#
+gdtdesc: .word gdt.1-gdt-1 # Limit
+ .long gdt # Base
+#
+# EDD Packet
+#
+edd_packet: .byte 0x10 # Length
+ .byte 0 # Reserved
+edd_len: .byte 0x0 # Num to read
+ .byte 0 # Reserved
+edd_addr: .word 0x0,0x0 # Seg:Off
+edd_lba: .quad 0x0 # LBA
+
+drive: .byte 0
+
+#
+# State for searching dir
+#
+rec_lba: .long 0x0 # LBA (adjusted for EA)
+rec_size: .long 0x0 # File size
+name_len: .byte 0x0 # Length of current name
+
+twiddle_index: .byte 0x0
+
+msg_welcome: .asciz "CD Loader 1.2\r\n\n"
+msg_bootinfo: .asciz "Building the boot loader arguments\r\n"
+msg_relocate: .asciz "Relocating the loader and the BTX\r\n"
+msg_jump: .asciz "Starting the BTX loader\r\n"
+msg_badread: .ascii "Read Error: 0x"
+hex_error: .asciz "00\r\n"
+msg_novd: .asciz "Could not find Primary Volume Descriptor\r\n"
+msg_lookup: .asciz "Looking up "
+msg_lookup2: .asciz "... "
+msg_lookupok: .asciz "Found\r\n"
+msg_lookupfail: .asciz "File not found\r\n"
+msg_load2big: .asciz "File too big\r\n"
+msg_failed: .asciz "Boot failed\r\n"
+twiddle_chars: .ascii "|/-\\"
+loader_paths: .asciz "/BOOT/LOADER"
+ .asciz "/boot/loader"
+ .byte 0
+
Modified: stable/9/sys/boot/i386/pxeldr/Makefile
==============================================================================
--- stable/9/sys/boot/i386/pxeldr/Makefile Fri Jun 29 10:08:31 2012 (r237760)
+++ stable/9/sys/boot/i386/pxeldr/Makefile Fri Jun 29 10:10:16 2012 (r237761)
@@ -23,6 +23,8 @@ CFLAGS+=-DPROBE_KEYBOARD
CFLAGS+=-DALWAYS_SERIAL
.endif
+CFLAGS+=-I${.CURDIR}/../common
+
LOADERBIN= ${.OBJDIR}/../loader/loader.bin
CLEANFILES+= ${BOOT}.tmp
Modified: stable/9/sys/boot/i386/pxeldr/pxeldr.S
==============================================================================
--- stable/9/sys/boot/i386/pxeldr/pxeldr.S Fri Jun 29 10:08:31 2012 (r237760)
+++ stable/9/sys/boot/i386/pxeldr/pxeldr.S Fri Jun 29 10:10:16 2012 (r237761)
@@ -26,6 +26,7 @@
*/
#include <sys/reboot.h>
+#include <bootargs.h>
/*
* Memory locations.
@@ -50,11 +51,6 @@
.set AOUT_ENTRY,0x14 # entry point
.set AOUT_HEADER,MEM_PAGE_SIZE # size of the a.out header
/*
- * Flags for kargs->bootflags
- */
- .set KARGS_FLAGS_PXE,0x2 # flag to indicate booting from
- # PXE loader
-/*
* Segment selectors.
*/
.set SEL_SDATA,0x8 # Supervisor data
More information about the svn-src-stable-9
mailing list