svn commit: r234719 - in stable/8: lib/libc/sys lib/libmemstat
lib/libpmc lib/libusb lib/libvgl sbin/iscontrol
share/man/man4 share/man/man9
Glen Barber
gjb at FreeBSD.org
Thu Apr 26 20:16:01 UTC 2012
Author: gjb (doc committer)
Date: Thu Apr 26 20:16:00 2012
New Revision: 234719
URL: http://svn.freebsd.org/changeset/base/234719
Log:
MFC r232157, r232158:
r232157:
Fix various typos in manual pages.
Submitted by: amdmi3
PR: 165431
r232158:
Whitespace cleanup:
o Wrap sentences on to new lines
o Cleanup trailing whitespace
Modified:
stable/8/lib/libc/sys/posix_fadvise.2
stable/8/lib/libc/sys/posix_fallocate.2
stable/8/lib/libmemstat/libmemstat.3
stable/8/lib/libpmc/pmc.westmere.3
stable/8/lib/libusb/libusb.3
stable/8/lib/libvgl/vgl.3
stable/8/sbin/iscontrol/iscsi.conf.5
stable/8/share/man/man4/acpi_panasonic.4
stable/8/share/man/man4/cxgbe.4
stable/8/share/man/man4/ed.4
stable/8/share/man/man4/mac_lomac.4
stable/8/share/man/man4/umcs.4
stable/8/share/man/man4/vr.4
stable/8/share/man/man9/zone.9
Directory Properties:
stable/8/lib/libc/ (props changed)
stable/8/lib/libc/sys/ (props changed)
stable/8/lib/libmemstat/ (props changed)
stable/8/lib/libpmc/ (props changed)
stable/8/lib/libusb/ (props changed)
stable/8/lib/libvgl/ (props changed)
stable/8/sbin/iscontrol/ (props changed)
stable/8/share/man/man4/ (props changed)
stable/8/share/man/man9/ (props changed)
Modified: stable/8/lib/libc/sys/posix_fadvise.2
==============================================================================
--- stable/8/lib/libc/sys/posix_fadvise.2 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/lib/libc/sys/posix_fadvise.2 Thu Apr 26 20:16:00 2012 (r234719)
@@ -28,7 +28,7 @@
.\" @(#)madvise.2 8.1 (Berkeley) 6/9/93
.\" $FreeBSD$
.\"
-.Dd October 26, 2011
+.Dd February 25, 2012
.Dt POSIX_FADVISE 2
.Os
.Sh NAME
@@ -74,7 +74,7 @@ This currently does nothing as the defau
detect sequential behavior.
.It Dv POSIX_FADV_WILLNEED
Tells the system that the specified data will be accessed in the near future.
-The system may initiate an asychronous read of the data if it is not already
+The system may initiate an asynchronous read of the data if it is not already
present in memory.
.It Dv POSIX_FADV_DONTNEED
Tells the system that the specified data will not be accessed in the near
Modified: stable/8/lib/libc/sys/posix_fallocate.2
==============================================================================
--- stable/8/lib/libc/sys/posix_fallocate.2 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/lib/libc/sys/posix_fallocate.2 Thu Apr 26 20:16:00 2012 (r234719)
@@ -28,7 +28,7 @@
.\" @(#)open.2 8.2 (Berkeley) 11/16/93
.\" $FreeBSD$
.\"
-.Dd April 13, 2011
+.Dd February 25, 2012
.Dt POSIX_FALLOCATE 2
.Os
.Sh NAME
@@ -48,7 +48,7 @@ to
.Fa len
in the file referenced by
.Fa fd
-is guarateed to be allocated upon successful return.
+is guaranteed to be allocated upon successful return.
That is, if
.Fn posix_fallocate
returns successfully, subsequent writes to the specified file data
Modified: stable/8/lib/libmemstat/libmemstat.3
==============================================================================
--- stable/8/lib/libmemstat/libmemstat.3 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/lib/libmemstat/libmemstat.3 Thu Apr 26 20:16:00 2012 (r234719)
@@ -24,7 +24,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd June 27, 2005
+.Dd February 25, 2012
.Dt LIBMEMSTAT 3
.Os
.Sh NAME
@@ -345,7 +345,7 @@ Return a caller-owned per-CPU pointer fo
Set a caller-owned per-CPU pointer for the memory type.
.It Fn memstat_get_percpu_caller_uint64
Return a caller-owned per-CPU integer for the memory type.
-.It Fn memsttat_set_percpu_caller_uint64
+.It Fn memstat_set_percpu_caller_uint64
Set a caller-owned per-CPU integer for the memory type.
.It Fn memstat_get_percpu_free
If the memory allocator supports a per-CPU cache, return the number of free
Modified: stable/8/lib/libpmc/pmc.westmere.3
==============================================================================
--- stable/8/lib/libpmc/pmc.westmere.3 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/lib/libpmc/pmc.westmere.3 Thu Apr 26 20:16:00 2012 (r234719)
@@ -23,7 +23,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd March 24, 2010
+.Dd February 25, 2012
.Dt PMC.WESTMERE 3
.Os
.Sh NAME
@@ -643,7 +643,7 @@ Counter 0.
.Pq Event 60H , Umask 08H
Counts weighted cycles of offcore read requests of any kind. Include L2
prefetch requests.
-Ccounter 0.
+Counter 0.
.It Li CACHE_LOCK_CYCLES.L1D_L2
.Pq Event 63H , Umask 01H
Cycle count during which the L1D and L2 are locked. A lock is asserted when
Modified: stable/8/lib/libusb/libusb.3
==============================================================================
--- stable/8/lib/libusb/libusb.3 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/lib/libusb/libusb.3 Thu Apr 26 20:16:00 2012 (r234719)
@@ -26,7 +26,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd November 9, 2011
+.Dd February 25, 2012
.Dt LIBUSB 3
.Os
.Sh NAME
@@ -483,7 +483,7 @@ on success and a LIBUSB_ERROR code on fa
.Pp
.Ft int
.Fn libusb_handle_events_locked "libusb_context *ctx" "struct timeval *tv"
-Handle any pending events by polling file desciptors, without checking if
+Handle any pending events by polling file descriptors, without checking if
another thread is already doing so.
Must be called with the event lock held.
.Pp
Modified: stable/8/lib/libvgl/vgl.3
==============================================================================
--- stable/8/lib/libvgl/vgl.3 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/lib/libvgl/vgl.3 Thu Apr 26 20:16:00 2012 (r234719)
@@ -25,7 +25,7 @@
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
-.Dd November 7, 1999
+.Dd February 25, 2012
.Dt VGL 3
.Os
.Sh NAME
@@ -385,7 +385,7 @@ Passing an in-memory bitmap to this func
The desired virtual screen width may not be achievable because
of the video card hardware.
In such case the video driver (and
-underlaying video BIOS) may choose the next largest values.
+underlying video BIOS) may choose the next largest values.
Always examine
.Va object->VXsize
and
Modified: stable/8/sbin/iscontrol/iscsi.conf.5
==============================================================================
--- stable/8/sbin/iscontrol/iscsi.conf.5 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/sbin/iscontrol/iscsi.conf.5 Thu Apr 26 20:16:00 2012 (r234719)
@@ -24,7 +24,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd June 5, 2007
+.Dd February 25, 2012
.Dt ISCSI.CONF 5
.Os
.Sh NAME
@@ -39,7 +39,7 @@ program.
It contains declarations and parameter/key-options.
The syntax is very simple,
.D1 Li variable = value;
-and they can be grouped via a
+and they can be grouped via a
.Em block
declaration:
.Bf Li
@@ -60,7 +60,7 @@ currently only supported authentication
digest either MD5 or SHA.
Default is none.
.It Cm HeaderDigest
-a
+a
.Em digest
is calculated on the header of all iSCSI PDUs, and
checked.
@@ -113,7 +113,7 @@ bytes it can receive in an iSCSI PDU, de
.It Cm MaxOutstandingR2T
is used to calculate/negotiate the
.Em tag opening ,
-can be overriden by the
+can be overridden by the
.Sy tag
option.
.It Cm DataPDUInOrder
@@ -141,7 +141,7 @@ to the value specified.
.It Cm maxluns
overrides the compiled value of
.Sy luns ,
-see
+see
.Xr iscsi_initiator 4 .
This value can only be reduced.
.It Cm sockbufsize
@@ -185,7 +185,7 @@ myiscsi { # nickname
targetaddress = iscsi1
targetname = iqn.1900.com.com:sn.123456
}
-chaptest {
+chaptest {
targetaddress= 10.0.0.1;
targetname = iqn.1900.com.com:sn.123456
initiatorname= iqn.2005-01.il.ac.huji.cs:nobody
Modified: stable/8/share/man/man4/acpi_panasonic.4
==============================================================================
--- stable/8/share/man/man4/acpi_panasonic.4 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/share/man/man4/acpi_panasonic.4 Thu Apr 26 20:16:00 2012 (r234719)
@@ -25,8 +25,8 @@
.\"
.\" $FreeBSD$
.\"
-.Dd September 17, 2009
-.Dt ACPI_PANASONIC 4 i386
+.Dd February 25, 2012
+.Dt ACPI_PANASONIC 4
.Os
.Sh NAME
.Nm acpi_panasonic
@@ -66,7 +66,7 @@ The third and last is to provide a way t
sound mute state via
.Xr sysctl 8 .
.Ss Hotkeys
-There are 9 hotkeys available on the supported hardwares:
+There are 9 hotkeys available on the supported hardware:
.Pp
.Bl -tag -compact -offset indent
.It Sy Fn+F1
Modified: stable/8/share/man/man4/cxgbe.4
==============================================================================
--- stable/8/share/man/man4/cxgbe.4 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/share/man/man4/cxgbe.4 Thu Apr 26 20:16:00 2012 (r234719)
@@ -31,7 +31,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd February 14, 2011
+.Dd February 25, 2012
.Dt CXGBE 4
.Os
.Sh NAME
@@ -56,7 +56,7 @@ The
.Nm
driver provides support for PCI Express Ethernet adapters based on
the Chelsio Terminator 4 (T4) ASIC.
-The driver supprts Jumbo Frames, Transmit/Receive checksum offload,
+The driver supports Jumbo Frames, Transmit/Receive checksum offload,
TCP segmentation offload (TSO), Large Receive Offload (LRO), VLAN
tag insertion/extraction, VLAN checksum offload, VLAN TSO, and
Receive Side Steering (RSS).
@@ -100,28 +100,36 @@ prompt before booting the kernel or stor
.Xr loader.conf 5 .
.Bl -tag -width indent
.It Va hw.cxgbe.ntxq10g
-The number of tx queues to use for a 10Gb port. The default is 16 or the number
+The number of tx queues to use for a 10Gb port.
+The default is 16 or the number
of CPU cores in the system, whichever is less.
.It Va hw.cxgbe.nrxq10g
-The number of rx queues to use for a 10Gb port. The default is 8 or the number
+The number of rx queues to use for a 10Gb port.
+The default is 8 or the number
of CPU cores in the system, whichever is less.
.It Va hw.cxgbe.ntxq1g
-The number of tx queues to use for a 1Gb port. The default is 4 or the number
+The number of tx queues to use for a 1Gb port.
+The default is 4 or the number
of CPU cores in the system, whichever is less.
.It Va hw.cxgbe.nrxq1g
-The number of rx queues to use for a 1Gb port. The default is 2 or the number
+The number of rx queues to use for a 1Gb port.
+The default is 2 or the number
of CPU cores in the system, whichever is less.
.It Va hw.cxgbe.nofldtxq10g
-The number of TOE tx queues to use for a 10Gb port. The default is 8 or the
+The number of TOE tx queues to use for a 10Gb port.
+The default is 8 or the
number of CPU cores in the system, whichever is less.
.It Va hw.cxgbe.nofldrxq10g
-The number of TOE rx queues to use for a 10Gb port. The default is 2 or the
+The number of TOE rx queues to use for a 10Gb port.
+The default is 2 or the
number of CPU cores in the system, whichever is less.
.It Va hw.cxgbe.nofldtxq1g
-The number of TOE tx queues to use for a 1Gb port. The default is 2 or the
+The number of TOE tx queues to use for a 1Gb port.
+The default is 2 or the
number of CPU cores in the system, whichever is less.
.It Va hw.cxgbe.nofldrxq1g
-The number of TOE rx queues to use for a 1Gb port. The default is 1.
+The number of TOE rx queues to use for a 1Gb port.
+The default is 1.
.It Va hw.cxgbe.holdoff_timer_idx_10G
.It Va hw.cxgbe.holdoff_timer_idx_1G
The timer index value to use to delay interrupts.
@@ -149,7 +157,8 @@ ifconfig up).
The size, in number of entries, of the descriptor ring used for a tx
queue.
A buf_ring of the same size is also allocated for additional
-software queuing. See
+software queuing.
+See
.Xr ifnet 9 .
The default value is 1024.
Different cxgbe interfaces can be assigned different values via the
Modified: stable/8/share/man/man4/ed.4
==============================================================================
--- stable/8/share/man/man4/ed.4 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/share/man/man4/ed.4 Thu Apr 26 20:16:00 2012 (r234719)
@@ -30,7 +30,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd April 9, 2009
+.Dd February 25, 2012
.Dt ED 4
.Os
.Sh NAME
@@ -285,7 +285,7 @@ Surecom EtherPerfect EP-427
.It
Surecom NE-34
.It
-TDK 3000/3400/5670 Fast Etherenet/Modem
+TDK 3000/3400/5670 Fast Ethernet/Modem
.It
TDK LAK-CD031, Grey Cell GCS2000 Ethernet Card
.It
@@ -419,8 +419,8 @@ packets are received.
As a result, it may throw out some good packets which
have been received but not yet transferred from the card to main memory.
.Pp
-The
-.Nm
+The
+.Nm
driver is slow by today's standards.
.Pp
PC Card attachment supports the D-Link DMF650TX LAN/Modem card's Ethernet
Modified: stable/8/share/man/man4/mac_lomac.4
==============================================================================
--- stable/8/share/man/man4/mac_lomac.4 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/share/man/man4/mac_lomac.4 Thu Apr 26 20:16:00 2012 (r234719)
@@ -30,7 +30,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd December 11, 2002
+.Dd February 25, 2012
.Dt MAC_LOMAC 4
.Os
.Sh NAME
@@ -63,7 +63,7 @@ which protects the integrity of system o
an information flow policy coupled with the subject demotion
via floating labels.
In LOMAC, all system subjects and objects are assigned integrity labels, made
-up of one or more hierarchal grades, depending on the their types.
+up of one or more hierarchical grades, depending on the their types.
Together, these label elements permit all labels to be placed in a partial
order, with information flow protections and demotion decisions
based on a dominance operator
Modified: stable/8/share/man/man4/umcs.4
==============================================================================
--- stable/8/share/man/man4/umcs.4 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/share/man/man4/umcs.4 Thu Apr 26 20:16:00 2012 (r234719)
@@ -28,7 +28,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd December 10, 2010
+.Dd February 25, 2012
.Dt UMCS 4
.Os
.Sh NAME
@@ -52,9 +52,11 @@ umcs_load="YES"
The
.Nm
driver provides support for various multiport serial adapters based on the MosCom
-MCS7820 and MCS7840 chips. They are 2- or 4-port adapters with full-featured
-16550-compatible UARTs and very flexible baud generators. Also, these chips
-support RS422/RS485 and IrDA oprations.
+MCS7820 and MCS7840 chips.
+They are 2- or 4-port adapters with full-featured
+16550-compatible UARTs and very flexible baud generators.
+Also, these chips
+support RS422/RS485 and IrDA operations.
.Pp
The device is accessed through the
.Xr ucom 4
Modified: stable/8/share/man/man4/vr.4
==============================================================================
--- stable/8/share/man/man4/vr.4 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/share/man/man4/vr.4 Thu Apr 26 20:16:00 2012 (r234719)
@@ -30,7 +30,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd February 7, 2010
+.Dd February 25, 2012
.Dt VR 4
.Os
.Sh NAME
@@ -95,7 +95,7 @@ or
.Ar half-duplex
modes.
.It 100baseTX
-Set 100Mbps (Fast Fthernet) operation.
+Set 100Mbps (Fast Ethernet) operation.
The
.Ar mediaopt
option can also be used to select either
Modified: stable/8/share/man/man9/zone.9
==============================================================================
--- stable/8/share/man/man9/zone.9 Thu Apr 26 20:14:26 2012 (r234718)
+++ stable/8/share/man/man9/zone.9 Thu Apr 26 20:16:00 2012 (r234719)
@@ -25,7 +25,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd October 9, 2010
+.Dd February 25, 2012
.Dt ZONE 9
.Os
.Sh NAME
@@ -210,7 +210,7 @@ The
.Fn uma_zone_get_cur
function returns the approximate current occupancy of the zone.
The returned value is approximate because appropriate synchronisation to
-determine an exact value is not performend by the implementation.
+determine an exact value is not performed by the implementation.
This ensures low overhead at the expense of potentially stale data being used
in the calculation.
.Sh RETURN VALUES
More information about the svn-src-stable-8
mailing list