svn commit: r234594 - in stable/8/sys: dev/bce i386/conf
Pyun YongHyeon
yongari at FreeBSD.org
Mon Apr 23 03:40:40 UTC 2012
Author: yongari
Date: Mon Apr 23 03:40:39 2012
New Revision: 234594
URL: http://svn.freebsd.org/changeset/base/234594
Log:
MFC r234121:
Back out r228476.
r228476 fixed superfluous link UP/DOWN messages but broke IPMI
access during boot. It's not clear why r228476 breaks IPMI and
should be revisited.
Reported by: Paul Guyot <paulguyot <> ieee dot org >
Modified:
stable/8/sys/dev/bce/if_bce.c
stable/8/sys/dev/bce/if_bcereg.h
Directory Properties:
stable/8/sys/ (props changed)
stable/8/sys/amd64/include/xen/ (props changed)
stable/8/sys/boot/ (props changed)
stable/8/sys/cddl/contrib/opensolaris/ (props changed)
stable/8/sys/contrib/dev/acpica/ (props changed)
stable/8/sys/contrib/pf/ (props changed)
stable/8/sys/dev/e1000/ (props changed)
stable/8/sys/i386/conf/XENHVM (props changed)
Modified: stable/8/sys/dev/bce/if_bce.c
==============================================================================
--- stable/8/sys/dev/bce/if_bce.c Mon Apr 23 03:38:40 2012 (r234593)
+++ stable/8/sys/dev/bce/if_bce.c Mon Apr 23 03:40:39 2012 (r234594)
@@ -1982,7 +1982,6 @@ static void
bce_miibus_statchg(device_t dev)
{
struct bce_softc *sc;
- struct ifnet *ifp;
struct mii_data *mii;
int val;
@@ -1990,57 +1989,42 @@ bce_miibus_statchg(device_t dev)
DBENTER(BCE_VERBOSE_PHY);
- ifp = sc->bce_ifp;
mii = device_get_softc(sc->bce_miibus);
- if (mii == NULL || ifp == NULL ||
- (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
- return;
- sc->bce_link_up = FALSE;
val = REG_RD(sc, BCE_EMAC_MODE);
val &= ~(BCE_EMAC_MODE_PORT | BCE_EMAC_MODE_HALF_DUPLEX |
BCE_EMAC_MODE_MAC_LOOP | BCE_EMAC_MODE_FORCE_LINK |
BCE_EMAC_MODE_25G);
/* Set MII or GMII interface based on the PHY speed. */
- if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
- (IFM_ACTIVE | IFM_AVALID)) {
- switch (IFM_SUBTYPE(mii->mii_media_active)) {
- case IFM_10_T:
- if (BCE_CHIP_NUM(sc) != BCE_CHIP_NUM_5706) {
- DBPRINT(sc, BCE_INFO_PHY,
- "Enabling 10Mb interface.\n");
- val |= BCE_EMAC_MODE_PORT_MII_10;
- sc->bce_link_up = TRUE;
- break;
- }
- /* FALLTHROUGH */
- case IFM_100_TX:
- DBPRINT(sc, BCE_INFO_PHY, "Enabling MII interface.\n");
- val |= BCE_EMAC_MODE_PORT_MII;
- sc->bce_link_up = TRUE;
- break;
- case IFM_2500_SX:
- DBPRINT(sc, BCE_INFO_PHY, "Enabling 2.5G MAC mode.\n");
- val |= BCE_EMAC_MODE_25G;
- /* FALLTHROUGH */
- case IFM_1000_T:
- case IFM_1000_SX:
- DBPRINT(sc, BCE_INFO_PHY, "Enabling GMII interface.\n");
- val |= BCE_EMAC_MODE_PORT_GMII;
- sc->bce_link_up = TRUE;
- if (bce_verbose || bootverbose)
- BCE_PRINTF("Gigabit link up!\n");
- break;
- default:
- DBPRINT(sc, BCE_INFO_PHY, "Unknown link speed.\n");
+ switch (IFM_SUBTYPE(mii->mii_media_active)) {
+ case IFM_10_T:
+ if (BCE_CHIP_NUM(sc) != BCE_CHIP_NUM_5706) {
+ DBPRINT(sc, BCE_INFO_PHY,
+ "Enabling 10Mb interface.\n");
+ val |= BCE_EMAC_MODE_PORT_MII_10;
break;
}
+ /* fall-through */
+ case IFM_100_TX:
+ DBPRINT(sc, BCE_INFO_PHY, "Enabling MII interface.\n");
+ val |= BCE_EMAC_MODE_PORT_MII;
+ break;
+ case IFM_2500_SX:
+ DBPRINT(sc, BCE_INFO_PHY, "Enabling 2.5G MAC mode.\n");
+ val |= BCE_EMAC_MODE_25G;
+ /* fall-through */
+ case IFM_1000_T:
+ case IFM_1000_SX:
+ DBPRINT(sc, BCE_INFO_PHY, "Enabling GMII interface.\n");
+ val |= BCE_EMAC_MODE_PORT_GMII;
+ break;
+ default:
+ DBPRINT(sc, BCE_INFO_PHY, "Unknown link speed, enabling "
+ "default GMII interface.\n");
+ val |= BCE_EMAC_MODE_PORT_GMII;
}
- if (sc->bce_link_up == FALSE)
- return;
-
/* Set half or full duplex based on PHY settings. */
if ((mii->mii_media_active & IFM_GMASK) == IFM_HDX) {
DBPRINT(sc, BCE_INFO_PHY,
@@ -2052,7 +2036,7 @@ bce_miibus_statchg(device_t dev)
REG_WR(sc, BCE_EMAC_MODE, val);
- if ((mii->mii_media_active & IFM_ETH_RXPAUSE) != 0) {
+ if ((mii->mii_media_active & IFM_ETH_RXPAUSE) != 0) {
DBPRINT(sc, BCE_INFO_PHY,
"%s(): Enabling RX flow control.\n", __FUNCTION__);
BCE_SETBIT(sc, BCE_EMAC_RX_MODE, BCE_EMAC_RX_MODE_FLOW_EN);
@@ -2062,7 +2046,7 @@ bce_miibus_statchg(device_t dev)
BCE_CLRBIT(sc, BCE_EMAC_RX_MODE, BCE_EMAC_RX_MODE_FLOW_EN);
}
- if ((mii->mii_media_active & IFM_ETH_TXPAUSE) != 0) {
+ if ((mii->mii_media_active & IFM_ETH_TXPAUSE) != 0) {
DBPRINT(sc, BCE_INFO_PHY,
"%s(): Enabling TX flow control.\n", __FUNCTION__);
BCE_SETBIT(sc, BCE_EMAC_TX_MODE, BCE_EMAC_TX_MODE_FLOW_EN);
@@ -6222,11 +6206,15 @@ bce_phy_intr(struct bce_softc *sc)
DBPRINT(sc, BCE_INFO_PHY, "%s(): Link is now DOWN.\n",
__FUNCTION__);
}
+
/*
- * Link state changed, allow tick routine to update
- * the state baased on actual media state.
+ * Assume link is down and allow
+ * tick routine to update the state
+ * based on the actual media state.
*/
- sc->bce_link_tick = TRUE;
+ sc->bce_link_up = FALSE;
+ callout_stop(&sc->bce_tick_callout);
+ bce_tick(sc);
}
/* Acknowledge the link change interrupt. */
@@ -6910,13 +6898,12 @@ bce_init_locked(struct bce_softc *sc)
/* Enable host interrupts. */
bce_enable_intr(sc, 1);
+ bce_ifmedia_upd_locked(ifp);
+
/* Let the OS know the driver is up and running. */
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
- sc->bce_link_tick = TRUE;
- bce_ifmedia_upd_locked(ifp);
-
callout_reset(&sc->bce_tick_callout, hz, bce_tick, sc);
bce_init_locked_exit:
@@ -8212,19 +8199,31 @@ bce_tick(void *xsc)
bce_watchdog(sc);
/* If link is up already up then we're done. */
- if (sc->bce_link_tick == FALSE && sc->bce_link_up == TRUE)
+ if (sc->bce_link_up == TRUE)
goto bce_tick_exit;
/* Link is down. Check what the PHY's doing. */
mii = device_get_softc(sc->bce_miibus);
mii_tick(mii);
- sc->bce_link_tick = FALSE;
- /* Now that link is up, handle any outstanding TX traffic. */
- if (sc->bce_link_up == TRUE && !IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
+ /* Check if the link has come up. */
+ if ((mii->mii_media_status & IFM_ACTIVE) &&
+ (IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE)) {
DBPRINT(sc, BCE_VERBOSE_MISC,
- "%s(): Found pending TX traffic.\n", __FUNCTION__);
- bce_start_locked(ifp);
+ "%s(): Link up!\n", __FUNCTION__);
+ sc->bce_link_up = TRUE;
+ if ((IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T ||
+ IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX ||
+ IFM_SUBTYPE(mii->mii_media_active) == IFM_2500_SX) &&
+ (bce_verbose || bootverbose))
+ BCE_PRINTF("Gigabit link up!\n");
+
+ /* Now that link is up, handle any outstanding TX traffic. */
+ if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
+ DBPRINT(sc, BCE_VERBOSE_MISC, "%s(): Found "
+ "pending TX traffic.\n", __FUNCTION__);
+ bce_start_locked(ifp);
+ }
}
bce_tick_exit:
Modified: stable/8/sys/dev/bce/if_bcereg.h
==============================================================================
--- stable/8/sys/dev/bce/if_bcereg.h Mon Apr 23 03:38:40 2012 (r234593)
+++ stable/8/sys/dev/bce/if_bcereg.h Mon Apr 23 03:40:39 2012 (r234594)
@@ -6560,7 +6560,6 @@ struct bce_softc
u16 pg_prod;
u16 pg_cons;
- int bce_link_tick;
int bce_link_up;
struct callout bce_tick_callout;
struct callout bce_pulse_callout;
More information about the svn-src-stable-8
mailing list