svn commit: r259318 - in stable/10/sys: arm/conf boot/fdt/dts
Ian Lepore
ian at FreeBSD.org
Fri Dec 13 17:29:32 UTC 2013
Author: ian
Date: Fri Dec 13 17:29:31 2013
New Revision: 259318
URL: http://svnweb.freebsd.org/changeset/base/259318
Log:
MFC r256809: Add configuration for the Freescale i.MX53 Quick Start Board.
Added:
stable/10/sys/arm/conf/IMX53-QSB
- copied unchanged from r256809, head/sys/arm/conf/IMX53-QSB
stable/10/sys/boot/fdt/dts/imx53-qsb.dts
- copied unchanged from r256809, head/sys/boot/fdt/dts/imx53-qsb.dts
Modified:
Directory Properties:
stable/10/ (props changed)
Copied: stable/10/sys/arm/conf/IMX53-QSB (from r256809, head/sys/arm/conf/IMX53-QSB)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/10/sys/arm/conf/IMX53-QSB Fri Dec 13 17:29:31 2013 (r259318, copy of r256809, head/sys/arm/conf/IMX53-QSB)
@@ -0,0 +1,179 @@
+# Kernel configuration for Freescale i.MX53 Quick Start Board
+#
+# For more information on this file, please read the config(5) manual page,
+# and/or the handbook section on Kernel Configuration Files:
+#
+# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
+# in NOTES.
+#
+# $FreeBSD$
+
+ident IMX53-QSB
+
+include "../freescale/imx/std.imx53"
+
+makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
+#options DEBUG
+
+options HZ=250 # 4ms scheduling quantum
+options SCHED_4BSD # 4BSD scheduler
+#options PREEMPTION # Enable kernel thread preemption
+options INET # InterNETworking
+options INET6 # IPv6 communications protocols
+#options SCTP # Stream Control Transmission Protocol
+options FFS # Berkeley Fast Filesystem
+options SOFTUPDATES # Enable FFS soft updates support
+options UFS_ACL # Support for access control lists
+options UFS_DIRHASH # Improve performance on big directories
+options UFS_GJOURNAL # Enable gjournal-based UFS journaling
+#options MD_ROOT # MD is a potential root device
+options NFSCL # New Network Filesystem Client
+#options NFSD # New Network Filesystem Server
+options NFSLOCKD # Network Lock Manager
+options NFS_ROOT # NFS usable as /, requires NFSCL
+options MSDOSFS # MSDOS Filesystem
+options CD9660 # ISO 9660 Filesystem
+#options PROCFS # Process filesystem (requires PSEUDOFS)
+options PSEUDOFS # Pseudo-filesystem framework
+options TMPFS # TMP Memory Filesystem
+options GEOM_PART_GPT # GUID Partition Tables.
+options GEOM_LABEL # Provides labelization
+#options COMPAT_FREEBSD5 # Compatible with FreeBSD5
+#options COMPAT_FREEBSD6 # Compatible with FreeBSD6
+#options COMPAT_FREEBSD7 # Compatible with FreeBSD7
+options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
+options KTRACE # ktrace(1) support
+options SYSVSHM # SYSV-style shared memory
+options SYSVMSG # SYSV-style message queues
+options SYSVSEM # SYSV-style semaphores
+options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
+options INCLUDE_CONFIG_FILE # Include this file in kernel
+options VFP # vfp/neon
+
+# required for netbooting
+#options BOOTP
+#options BOOTP_COMPAT
+#options BOOTP_NFSROOT
+#options BOOTP_NFSV3
+#options BOOTP_WIRED_TO=ue0
+
+#options ROOTDEVNAME=\"ufs:ada0s2a\"
+
+
+# kernel/memory size reduction
+#options MUTEX_NOINLINE
+#options NO_FFS_SNAPSHOT
+#options NO_SWAPPING
+#options NO_SYSCTL_DESCR
+#options RWLOCK_NOINLINE
+
+# Debugging support. Always need this:
+options KDB # Enable kernel debugger support.
+# For minimum debugger support (stable branch) use:
+#options KDB_TRACE # Print a stack trace for a panic.
+# For full debugger support use this instead:
+options DDB # Support DDB.
+#options GDB # Support remote GDB.
+#options DEADLKRES # Enable the deadlock resolver
+#options INVARIANTS # Enable calls of extra sanity checking
+#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
+#options WITNESS # Enable checks to detect deadlocks and cycles
+
+# The `bpf' device enables the Berkeley Packet Filter.
+# Be aware of the administrative consequences of enabling this!
+# Note that 'bpf' is required for DHCP.
+device bpf # Berkeley packet filter
+
+# Pseudo devices.
+device loop # Network loopback
+device random # Entropy device
+device ether # Ethernet support
+#device vlan # 802.1Q VLAN support
+#device tun # Packet tunnel.
+device md # Memory "disks"
+#device gif # IPv6 and IPv4 tunneling
+#device faith # IPv6-to-IPv4 relaying (translation)
+#device firmware # firmware assist module
+
+# Ethernet
+device ffec # Freescale Fast Ethernet Controller
+device miibus # Standard mii bus
+
+# Serial (COM) ports
+device uart # Multi-uart driver
+options ALT_BREAK_TO_DEBUGGER
+
+#device ata
+#device atapci # Only for helper functions
+#device imxata
+#options ATA_STATIC_ID # Static device numbering
+
+device iomux # IO Multiplexor
+
+device gpio
+device gpioled
+
+device fsliic
+device iic
+device iicbus
+
+# SCSI peripherals
+device scbus # SCSI bus (required for SCSI)
+device da # Direct Access (disks)
+device cd # CD
+device pass # Passthrough device (direct SCSI access)
+
+# USB support
+#options USB_DEBUG # enable debug msgs
+device ehci # OHCI USB interface
+device usb # USB Bus (required)
+device umass # Disks/Mass storage - Requires scbus and da
+#device uhid # "Human Interface Devices"
+#device ukbd # Allow keyboard like HIDs to control console
+#device ums
+
+# USB Ethernet, requires miibus
+#device miibus
+#device aue # ADMtek USB Ethernet
+#device axe # ASIX Electronics USB Ethernet
+#device cdce # Generic USB over Ethernet
+#device cue # CATC USB Ethernet
+#device kue # Kawasaki LSI USB Ethernet
+#device rue # RealTek RTL8150 USB Ethernet
+#device udav # Davicom DM9601E USB
+
+# USB Wireless
+#device rum # Ralink Technology RT2501USB wireless NICs
+
+# Watchdog timer.
+# WARNING: can't be disabled!!!
+device imxwdt # Watchdog
+
+# Wireless NIC cards
+device wlan # 802.11 support
+device wlan_wep # 802.11 WEP support
+device wlan_ccmp # 802.11 CCMP support
+device wlan_tkip # 802.11 TKIP support
+device wlan_amrr # AMRR transmit rate control algorithm
+
+# Flattened Device Tree
+options FDT
+options FDT_DTB_STATIC
+makeoptions FDT_DTS_FILE=imx53-qsb.dts
+
+# NOTE: serial console will be disabled if syscons enabled
+# Uncomment following lines for framebuffer/syscons support
+#device sc
+#device kbdmux
+#options SC_DFLT_FONT # compile font in
+#makeoptions SC_DFLT_FONT=cp437
+
Copied: stable/10/sys/boot/fdt/dts/imx53-qsb.dts (from r256809, head/sys/boot/fdt/dts/imx53-qsb.dts)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/10/sys/boot/fdt/dts/imx53-qsb.dts Fri Dec 13 17:29:31 2013 (r259318, copy of r256809, head/sys/boot/fdt/dts/imx53-qsb.dts)
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2012 The FreeBSD Foundation
+ * Copyright (c) 2013 Rui Paulo
+ * All rights reserved.
+ *
+ * This software was developed by Semihalf under sponsorship from
+ * the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Freescale i.MX53 Quick Start Board
+ *
+ * $FreeBSD$
+ */
+
+/dts-v1/;
+/include/ "imx53x.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Quick Start Board";
+ compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+ memory {
+ /* RAM 512M */
+ reg = <0x70000000 0x20000000>;
+ };
+
+ localbus at 18000000 {
+ ipu3 at 18000000 {
+ status = "okay";
+ };
+ };
+
+ soc at 50000000 {
+ aips at 50000000 {
+ spba at 50000000 {
+ esdhc at 50004000 {
+ clock-frequency = <216000000>;
+ status = "okay";
+ };
+ esdhc at 50008000 {
+ clock-frequency = <216000000>;
+ status = "okay";
+ };
+ SSI2: ssi at 50014000 {
+ status = "okay";
+ };
+ };
+ timer at 53fa0000 {
+ status = "okay";
+ };
+
+ /* UART1, console */
+ console: serial at 53fbc000 {
+ status = "okay";
+ clock-frequency = <0>; /* won't load w/o this */
+ };
+
+ clock at 53fd4000 {
+ status = "okay";
+ };
+ gpio at 53f84000 {
+ status = "okay";
+ };
+ gpio at 53f88000 {
+ status = "okay";
+ };
+ gpio at 53f8c000 {
+ status = "okay";
+ };
+ gpio at 53f90000 {
+ status = "okay";
+ };
+ wdog at 53f98000 {
+ status = "okay";
+ };
+ };
+ aips at 60000000 {
+ ethernet at 63fec000 {
+ status = "okay";
+ phy-mode = "rmii";
+ }
+ i2c at 63fc4000 {
+ status = "okay";
+ };
+ i2c at 63fc8000 {
+ status = "okay";
+ };
+ audmux at 63fd4000 {
+ status = "okay";
+ };
+ ide at 63fe0000 {
+ status = "okay";
+ };
+ };
+ };
+
+ aliases {
+ SSI2 = &SSI2;
+ };
+
+ chosen {
+ bootargs = "-v";
+ stdin = &console;
+ stdout = &console;
+ };
+};
More information about the svn-src-stable-10
mailing list