svn commit: r214279 - in head: share/man/man4 sys/cam sys/cam/ata
sys/kern
Bruce Cran
brucec at FreeBSD.org
Sun Oct 24 16:31:58 UTC 2010
Author: brucec
Date: Sun Oct 24 16:31:57 2010
New Revision: 214279
URL: http://svn.freebsd.org/changeset/base/214279
Log:
Mostly revert r203420, and add similar functionality into ada(4) since the
existing code caused problems with some SCSI controllers.
A new sysctl kern.cam.ada.spindown_shutdown has been added that controls
whether or not to spin-down disks when shutting down.
Spinning down the disks unloads/parks the heads - this is
much better than removing power when the disk is still
spinning because otherwise an Emergency Unload occurs which may cause damage
to the actuator.
PR: kern/140752
Submitted by: olli
Reviewed by: arundel
Discussed with: mav
MFC after: 2 weeks
Modified:
head/share/man/man4/ada.4
head/sys/cam/ata/ata_da.c
head/sys/cam/cam_xpt.c
head/sys/kern/kern_shutdown.c
Modified: head/share/man/man4/ada.4
==============================================================================
--- head/share/man/man4/ada.4 Sun Oct 24 16:10:32 2010 (r214278)
+++ head/share/man/man4/ada.4 Sun Oct 24 16:31:57 2010 (r214279)
@@ -118,6 +118,9 @@ This variable determines how long the
driver will wait before timing out an outstanding command.
The units for this value are seconds, and the default is currently 30
seconds.
+.It kern.cam.ada.spindown_shutdown
+.Pp
+This variable determines whether to spin-down disks when shutting down.
.El
.Sh FILES
.Bl -tag -width ".Pa /dev/ada*" -compact
Modified: head/sys/cam/ata/ata_da.c
==============================================================================
--- head/sys/cam/ata/ata_da.c Sun Oct 24 16:10:32 2010 (r214278)
+++ head/sys/cam/ata/ata_da.c Sun Oct 24 16:31:57 2010 (r214279)
@@ -42,6 +42,7 @@ __FBSDID("$FreeBSD$");
#include <sys/eventhandler.h>
#include <sys/malloc.h>
#include <sys/cons.h>
+#include <sys/reboot.h>
#include <geom/geom_disk.h>
#endif /* _KERNEL */
@@ -79,7 +80,8 @@ typedef enum {
ADA_FLAG_CAN_TRIM = 0x080,
ADA_FLAG_OPEN = 0x100,
ADA_FLAG_SCTX_INIT = 0x200,
- ADA_FLAG_CAN_CFA = 0x400
+ ADA_FLAG_CAN_CFA = 0x400,
+ ADA_FLAG_CAN_POWERMGT = 0x800
} ada_flags;
typedef enum {
@@ -180,6 +182,10 @@ static void adashutdown(void *arg, int
#define ADA_DEFAULT_SEND_ORDERED 1
#endif
+#ifndef ADA_DEFAULT_SPINDOWN_SHUTDOWN
+#define ADA_DEFAULT_SPINDOWN_SHUTDOWN 1
+#endif
+
/*
* Most platforms map firmware geometry to actual, but some don't. If
* not overridden, default to nothing.
@@ -191,6 +197,7 @@ static void adashutdown(void *arg, int
static int ada_retry_count = ADA_DEFAULT_RETRY;
static int ada_default_timeout = ADA_DEFAULT_TIMEOUT;
static int ada_send_ordered = ADA_DEFAULT_SEND_ORDERED;
+static int ada_spindown_shutdown = ADA_DEFAULT_SPINDOWN_SHUTDOWN;
SYSCTL_NODE(_kern_cam, OID_AUTO, ada, CTLFLAG_RD, 0,
"CAM Direct Access Disk driver");
@@ -203,6 +210,9 @@ TUNABLE_INT("kern.cam.ada.default_timeou
SYSCTL_INT(_kern_cam_ada, OID_AUTO, ada_send_ordered, CTLFLAG_RW,
&ada_send_ordered, 0, "Send Ordered Tags");
TUNABLE_INT("kern.cam.ada.ada_send_ordered", &ada_send_ordered);
+SYSCTL_INT(_kern_cam_ada, OID_AUTO, spindown_shutdown, CTLFLAG_RW,
+ &ada_spindown_shutdown, 0, "Spin down upon shutdown");
+TUNABLE_INT("kern.cam.ada.spindown_shutdown", &ada_spindown_shutdown);
/*
* ADA_ORDEREDTAG_INTERVAL determines how often, relative
@@ -665,6 +675,8 @@ adaregister(struct cam_periph *periph, v
softc->flags |= ADA_FLAG_CAN_48BIT;
if (cgd->ident_data.support.command2 & ATA_SUPPORT_FLUSHCACHE)
softc->flags |= ADA_FLAG_CAN_FLUSHCACHE;
+ if (cgd->ident_data.support.command1 & ATA_SUPPORT_POWERMGT)
+ softc->flags |= ADA_FLAG_CAN_POWERMGT;
if (cgd->ident_data.satacapabilities & ATA_SUPPORT_NCQ &&
cgd->inq_flags & SID_CmdQue)
softc->flags |= ADA_FLAG_CAN_NCQ;
@@ -1227,6 +1239,56 @@ adashutdown(void * arg, int howto)
/*getcount_only*/0);
cam_periph_unlock(periph);
}
+
+ if (ada_spindown_shutdown == 0 ||
+ (howto & (RB_HALT | RB_POWEROFF)) == 0)
+ return;
+
+ TAILQ_FOREACH(periph, &adadriver.units, unit_links) {
+ union ccb ccb;
+
+ /* If we paniced with lock held - not recurse here. */
+ if (cam_periph_owned(periph))
+ continue;
+ cam_periph_lock(periph);
+ softc = (struct ada_softc *)periph->softc;
+ /*
+ * We only spin-down the drive if it is capable of it..
+ */
+ if ((softc->flags & ADA_FLAG_CAN_POWERMGT) == 0) {
+ cam_periph_unlock(periph);
+ continue;
+ }
+
+ if (bootverbose)
+ xpt_print(periph->path, "spin-down\n");
+
+ xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
+
+ ccb.ccb_h.ccb_state = ADA_CCB_DUMP;
+ cam_fill_ataio(&ccb.ataio,
+ 1,
+ adadone,
+ CAM_DIR_NONE,
+ 0,
+ NULL,
+ 0,
+ ada_default_timeout*1000);
+
+ ata_28bit_cmd(&ccb.ataio, ATA_STANDBY_IMMEDIATE, 0, 0, 0);
+ xpt_polled_action(&ccb);
+
+ if ((ccb.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
+ xpt_print(periph->path, "Spin-down disk failed\n");
+
+ if ((ccb.ccb_h.status & CAM_DEV_QFRZN) != 0)
+ cam_release_devq(ccb.ccb_h.path,
+ /*relsim_flags*/0,
+ /*reduction*/0,
+ /*timeout*/0,
+ /*getcount_only*/0);
+ cam_periph_unlock(periph);
+ }
}
#endif /* _KERNEL */
Modified: head/sys/cam/cam_xpt.c
==============================================================================
--- head/sys/cam/cam_xpt.c Sun Oct 24 16:10:32 2010 (r214278)
+++ head/sys/cam/cam_xpt.c Sun Oct 24 16:31:57 2010 (r214279)
@@ -39,7 +39,6 @@ __FBSDID("$FreeBSD$");
#include <sys/time.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
-#include <sys/reboot.h>
#include <sys/interrupt.h>
#include <sys/sbuf.h>
#include <sys/taskqueue.h>
@@ -153,10 +152,6 @@ static struct xpt_softc xsoftc;
TUNABLE_INT("kern.cam.boot_delay", &xsoftc.boot_delay);
SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
&xsoftc.boot_delay, 0, "Bus registration wait time");
-static int xpt_power_down = 0;
-TUNABLE_INT("kern.cam.power_down", &xpt_power_down);
-SYSCTL_INT(_kern_cam, OID_AUTO, power_down, CTLFLAG_RW,
- &xpt_power_down, 0, "Power down devices on shutdown");
/* Queues for our software interrupt handler */
typedef TAILQ_HEAD(cam_isrq, ccb_hdr) cam_isrq_t;
@@ -250,7 +245,6 @@ static struct cam_ed*
xpt_find_device(struct cam_et *target, lun_id_t lun_id);
static void xpt_config(void *arg);
static xpt_devicefunc_t xptpassannouncefunc;
-static void xpt_shutdown(void *arg, int howto);
static void xptaction(struct cam_sim *sim, union ccb *work_ccb);
static void xptpoll(struct cam_sim *sim);
static void camisr(void *);
@@ -4538,12 +4532,6 @@ xpt_config(void *arg)
#endif /* CAM_DEBUG_BUS */
#endif /* CAMDEBUG */
- /* Register our shutdown event handler */
- if ((EVENTHANDLER_REGISTER(shutdown_final, xpt_shutdown,
- NULL, SHUTDOWN_PRI_FIRST)) == NULL) {
- printf("xpt_config: failed to register shutdown event.\n");
- }
-
periphdriver_init(1);
xpt_hold_boot();
callout_init(&xsoftc.boot_callout, 1);
@@ -4625,87 +4613,6 @@ xpt_finishconfig_task(void *context, int
free(context, M_CAMXPT);
}
-/*
- * Power down all devices when we are going to power down the system.
- */
-static void
-xpt_shutdown_dev_done(struct cam_periph *periph, union ccb *done_ccb)
-{
-
- /* No-op. We're polling. */
- return;
-}
-
-static int
-xpt_shutdown_dev(struct cam_ed *device, void *arg)
-{
- union ccb ccb;
- struct cam_path path;
-
- if (device->flags & CAM_DEV_UNCONFIGURED)
- return (1);
-
- if (device->protocol == PROTO_ATA) {
- /* Only power down device if it supports power management. */
- if ((device->ident_data.support.command1 &
- ATA_SUPPORT_POWERMGT) == 0)
- return (1);
- } else if (device->protocol != PROTO_SCSI)
- return (1);
-
- xpt_compile_path(&path,
- NULL,
- device->target->bus->path_id,
- device->target->target_id,
- device->lun_id);
- xpt_setup_ccb(&ccb.ccb_h, &path, CAM_PRIORITY_NORMAL);
- if (device->protocol == PROTO_ATA) {
- cam_fill_ataio(&ccb.ataio,
- 1,
- xpt_shutdown_dev_done,
- CAM_DIR_NONE,
- 0,
- NULL,
- 0,
- 30*1000);
- ata_28bit_cmd(&ccb.ataio, ATA_SLEEP, 0, 0, 0);
- } else {
- scsi_start_stop(&ccb.csio,
- /*retries*/1,
- xpt_shutdown_dev_done,
- MSG_SIMPLE_Q_TAG,
- /*start*/FALSE,
- /*load/eject*/FALSE,
- /*immediate*/TRUE,
- SSD_FULL_SIZE,
- /*timeout*/50*1000);
- }
- xpt_polled_action(&ccb);
-
- if ((ccb.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
- xpt_print(&path, "Device power down failed\n");
- if ((ccb.ccb_h.status & CAM_DEV_QFRZN) != 0)
- cam_release_devq(ccb.ccb_h.path,
- /*relsim_flags*/0,
- /*reduction*/0,
- /*timeout*/0,
- /*getcount_only*/0);
- xpt_release_path(&path);
- return (1);
-}
-
-static void
-xpt_shutdown(void * arg, int howto)
-{
-
- if (!xpt_power_down)
- return;
- if ((howto & RB_POWEROFF) == 0)
- return;
-
- xpt_for_all_devices(xpt_shutdown_dev, NULL);
-}
-
cam_status
xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
struct cam_path *path)
Modified: head/sys/kern/kern_shutdown.c
==============================================================================
--- head/sys/kern/kern_shutdown.c Sun Oct 24 16:10:32 2010 (r214278)
+++ head/sys/kern/kern_shutdown.c Sun Oct 24 16:31:57 2010 (r214279)
@@ -144,7 +144,7 @@ shutdown_conf(void *unused)
{
EVENTHANDLER_REGISTER(shutdown_final, poweroff_wait, NULL,
- SHUTDOWN_PRI_FIRST + 100);
+ SHUTDOWN_PRI_FIRST);
EVENTHANDLER_REGISTER(shutdown_final, shutdown_halt, NULL,
SHUTDOWN_PRI_LAST + 100);
EVENTHANDLER_REGISTER(shutdown_final, shutdown_panic, NULL,
More information about the svn-src-head
mailing list