svn commit: r192448 - head/sys/dev/usb/controller
Andrew Thompson
thompsa at FreeBSD.org
Wed May 20 17:03:13 UTC 2009
Author: thompsa
Date: Wed May 20 17:03:12 2009
New Revision: 192448
URL: http://svn.freebsd.org/changeset/base/192448
Log:
Use defines for register offsets that do not change.
Submitted by: Hans Petter Selasky
Modified:
head/sys/dev/usb/controller/uss820dci.c
head/sys/dev/usb/controller/uss820dci.h
Modified: head/sys/dev/usb/controller/uss820dci.c
==============================================================================
--- head/sys/dev/usb/controller/uss820dci.c Wed May 20 17:01:40 2009 (r192447)
+++ head/sys/dev/usb/controller/uss820dci.c Wed May 20 17:03:12 2009 (r192448)
@@ -230,11 +230,11 @@ uss820dci_setup_rx(struct uss820dci_td *
/* select the correct endpoint */
bus_space_write_1(td->io_tag, td->io_hdl,
- td->ep_reg, td->ep_index);
+ USS820_EPINDEX, td->ep_index);
/* read out FIFO status */
rx_stat = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_stat_reg);
+ USS820_RXSTAT);
/* get pointer to softc */
sc = USS820_DCI_PC2SC(td->pc);
@@ -260,9 +260,9 @@ uss820dci_setup_rx(struct uss820dci_td *
/* get the packet byte count */
count = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_count_low_reg);
+ USS820_RXCNTL);
count |= (bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_count_high_reg) << 8);
+ USS820_RXCNTH) << 8);
count &= 0x3FF;
/* verify data length */
@@ -278,11 +278,11 @@ uss820dci_setup_rx(struct uss820dci_td *
}
/* receive data */
bus_space_read_multi_1(td->io_tag, td->io_hdl,
- td->rx_fifo_reg, (void *)&req, sizeof(req));
+ USS820_RXDAT, (void *)&req, sizeof(req));
/* read out FIFO status */
rx_stat = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_stat_reg);
+ USS820_RXSTAT);
if (rx_stat & (USS820_RXSTAT_EDOVW |
USS820_RXSTAT_STOVW)) {
@@ -297,10 +297,10 @@ uss820dci_setup_rx(struct uss820dci_td *
/* set RXFFRC bit */
temp = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_cntl_reg);
+ USS820_RXCON);
temp |= USS820_RXCON_RXFFRC;
bus_space_write_1(td->io_tag, td->io_hdl,
- td->rx_cntl_reg, temp);
+ USS820_RXCON, temp);
/* copy data into real buffer */
usb2_copy_in(td->pc, 0, &req, sizeof(req));
@@ -321,10 +321,10 @@ setup_not_complete:
/* set RXFFRC bit */
temp = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_cntl_reg);
+ USS820_RXCON);
temp |= USS820_RXCON_RXFFRC;
bus_space_write_1(td->io_tag, td->io_hdl,
- td->rx_cntl_reg, temp);
+ USS820_RXCON, temp);
/* FALLTHROUGH */
@@ -365,16 +365,16 @@ uss820dci_data_rx(struct uss820dci_td *t
got_short = 0;
/* select the correct endpoint */
- bus_space_write_1(td->io_tag, td->io_hdl, td->ep_reg, td->ep_index);
+ bus_space_write_1(td->io_tag, td->io_hdl, USS820_EPINDEX, td->ep_index);
/* check if any of the FIFO banks have data */
repeat:
/* read out FIFO flag */
rx_flag = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_flag_reg);
+ USS820_RXFLG);
/* read out FIFO status */
rx_stat = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_stat_reg);
+ USS820_RXSTAT);
DPRINTFN(5, "rx_stat=0x%02x rx_flag=0x%02x rem=%u\n",
rx_stat, rx_flag, td->remainder);
@@ -419,10 +419,10 @@ repeat:
}
/* get the packet byte count */
count = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_count_low_reg);
+ USS820_RXCNTL);
count |= (bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_count_high_reg) << 8);
+ USS820_RXCNTH) << 8);
count &= 0x3FF;
DPRINTFN(5, "count=0x%04x\n", count);
@@ -454,7 +454,7 @@ repeat:
}
/* receive data */
bus_space_read_multi_1(td->io_tag, td->io_hdl,
- td->rx_fifo_reg, buf_res.buffer, buf_res.length);
+ USS820_RXDAT, buf_res.buffer, buf_res.length);
/* update counters */
count -= buf_res.length;
@@ -464,10 +464,10 @@ repeat:
/* set RXFFRC bit */
rx_cntl = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_cntl_reg);
+ USS820_RXCON);
rx_cntl |= USS820_RXCON_RXFFRC;
bus_space_write_1(td->io_tag, td->io_hdl,
- td->rx_cntl_reg, rx_cntl);
+ USS820_RXCON, rx_cntl);
/* check if we are complete */
if ((td->remainder == 0) || got_short) {
@@ -495,18 +495,18 @@ uss820dci_data_tx(struct uss820dci_td *t
/* select the correct endpoint */
bus_space_write_1(td->io_tag, td->io_hdl,
- td->ep_reg, td->ep_index);
+ USS820_EPINDEX, td->ep_index);
to = 2; /* don't loop forever! */
repeat:
/* read out TX FIFO flags */
tx_flag = bus_space_read_1(td->io_tag, td->io_hdl,
- td->tx_flag_reg);
+ USS820_TXFLG);
/* read out RX FIFO status last */
rx_stat = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_stat_reg);
+ USS820_RXSTAT);
DPRINTFN(5, "rx_stat=0x%02x tx_flag=0x%02x rem=%u\n",
rx_stat, tx_flag, td->remainder);
@@ -553,7 +553,7 @@ repeat:
}
/* transmit data */
bus_space_write_multi_1(td->io_tag, td->io_hdl,
- td->tx_fifo_reg, buf_res.buffer, buf_res.length);
+ USS820_TXDAT, buf_res.buffer, buf_res.length);
/* update counters */
count -= buf_res.length;
@@ -563,11 +563,11 @@ repeat:
/* post-write high packet byte count first */
bus_space_write_1(td->io_tag, td->io_hdl,
- td->tx_count_high_reg, count_copy >> 8);
+ USS820_TXCNTH, count_copy >> 8);
/* post-write low packet byte count last */
bus_space_write_1(td->io_tag, td->io_hdl,
- td->tx_count_low_reg, count_copy);
+ USS820_TXCNTL, count_copy);
/*
* Enable TX output, which must happen after that we have written
@@ -600,15 +600,15 @@ uss820dci_data_tx_sync(struct uss820dci_
/* select the correct endpoint */
bus_space_write_1(td->io_tag, td->io_hdl,
- td->ep_reg, td->ep_index);
+ USS820_EPINDEX, td->ep_index);
/* read out TX FIFO flag */
tx_flag = bus_space_read_1(td->io_tag, td->io_hdl,
- td->tx_flag_reg);
+ USS820_TXFLG);
/* read out RX FIFO status last */
rx_stat = bus_space_read_1(td->io_tag, td->io_hdl,
- td->rx_stat_reg);
+ USS820_RXSTAT);
DPRINTFN(5, "rx_stat=0x%02x rem=%u\n", rx_stat, td->remainder);
@@ -2269,20 +2269,6 @@ uss820dci_xfer_setup(struct usb2_setup_p
td->io_tag = sc->sc_io_tag;
td->io_hdl = sc->sc_io_hdl;
td->max_packet_size = xfer->max_packet_size;
- td->rx_stat_reg = USS820_GET_REG(sc, USS820_RXSTAT);
- td->tx_stat_reg = USS820_GET_REG(sc, USS820_TXSTAT);
- td->rx_flag_reg = USS820_GET_REG(sc, USS820_RXFLG);
- td->tx_flag_reg = USS820_GET_REG(sc, USS820_TXFLG);
- td->rx_fifo_reg = USS820_GET_REG(sc, USS820_RXDAT);
- td->tx_fifo_reg = USS820_GET_REG(sc, USS820_TXDAT);
- td->rx_count_low_reg = USS820_GET_REG(sc, USS820_RXCNTL);
- td->rx_count_high_reg = USS820_GET_REG(sc, USS820_RXCNTH);
- td->tx_count_low_reg = USS820_GET_REG(sc, USS820_TXCNTL);
- td->tx_count_high_reg = USS820_GET_REG(sc, USS820_TXCNTH);
- td->rx_cntl_reg = USS820_GET_REG(sc, USS820_RXCON);
- td->tx_cntl_reg = USS820_GET_REG(sc, USS820_TXCON);
- td->pend_reg = USS820_GET_REG(sc, USS820_PEND);
- td->ep_reg = USS820_GET_REG(sc, USS820_EPINDEX);
td->ep_index = ep_no;
if (pf->support_multi_buffer &&
(parm->methods != &uss820dci_device_ctrl_methods)) {
Modified: head/sys/dev/usb/controller/uss820dci.h
==============================================================================
--- head/sys/dev/usb/controller/uss820dci.h Wed May 20 17:01:40 2009 (r192447)
+++ head/sys/dev/usb/controller/uss820dci.h Wed May 20 17:03:12 2009 (r192448)
@@ -255,16 +255,11 @@
#define USS820_UNK1 0x1f /* Unknown */
#define USS820_UNK1_UNKNOWN 0xFF
-#define USS820_GET_REG(sc,reg) \
- ((reg) << (sc)->sc_reg_shift)
-
#define USS820_READ_1(sc, reg) \
- bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, \
- USS820_GET_REG(sc,reg))
+ bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, reg)
#define USS820_WRITE_1(sc, reg, data) \
- bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, \
- USS820_GET_REG(sc,reg), data)
+ bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, reg, data)
struct uss820dci_td;
@@ -279,20 +274,6 @@ struct uss820dci_td {
uint32_t offset;
uint32_t remainder;
uint16_t max_packet_size;
- uint8_t rx_stat_reg;
- uint8_t tx_stat_reg;
- uint8_t rx_flag_reg;
- uint8_t tx_flag_reg;
- uint8_t rx_fifo_reg;
- uint8_t tx_fifo_reg;
- uint8_t rx_count_low_reg;
- uint8_t rx_count_high_reg;
- uint8_t tx_count_low_reg;
- uint8_t tx_count_high_reg;
- uint8_t rx_cntl_reg;
- uint8_t tx_cntl_reg;
- uint8_t ep_reg;
- uint8_t pend_reg;
uint8_t ep_index;
uint8_t error:1;
uint8_t alt_next:1;
@@ -356,7 +337,6 @@ struct uss820dci_softc {
uint8_t sc_rt_addr; /* root HUB address */
uint8_t sc_dv_addr; /* device address */
uint8_t sc_conf; /* root HUB config */
- uint8_t sc_reg_shift;
uint8_t sc_hub_idata[1];
More information about the svn-src-head
mailing list