svn commit: r328257 - in head/sys: arm/broadcom/bcm2835 dts/arm modules
Poul-Henning Kamp
phk at FreeBSD.org
Mon Jan 22 07:10:32 UTC 2018
Author: phk
Date: Mon Jan 22 07:10:30 2018
New Revision: 328257
URL: https://svnweb.freebsd.org/changeset/base/328257
Log:
Add a skeleton Clock Manager for RPi2/3, and use that from pwm
instead of frobbing the registers directly.
As a hack the bcm2835_pwm kmod presently ignores the 'status="disabled"'
in the RPI3 DTB, assuming that if you load the kld you probably
want the PWM to work.
Added:
head/sys/arm/broadcom/bcm2835/bcm2835_clkman.c (contents, props changed)
head/sys/arm/broadcom/bcm2835/bcm2835_clkman.h (contents, props changed)
Modified:
head/sys/arm/broadcom/bcm2835/bcm2835_pwm.c
head/sys/dts/arm/bcm2836.dtsi
head/sys/modules/Makefile
Added: head/sys/arm/broadcom/bcm2835/bcm2835_clkman.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/broadcom/bcm2835/bcm2835_clkman.c Mon Jan 22 07:10:30 2018 (r328257)
@@ -0,0 +1,212 @@
+/*-
+ * Copyright (C) 2013-2015 Daisuke Aoyama <aoyama at peach.ne.jp>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/cpu.h>
+#include <sys/kernel.h>
+#include <sys/lock.h>
+#include <sys/malloc.h>
+#include <sys/module.h>
+#include <sys/mutex.h>
+#include <sys/rman.h>
+#include <sys/sema.h>
+#include <sys/sysctl.h>
+
+#include <machine/bus.h>
+#include <machine/cpu.h>
+
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <arm/broadcom/bcm2835/bcm2835_clkman.h>
+
+static struct ofw_compat_data compat_data[] = {
+ {"brcm,bcm2835-cprman", 1},
+ {"broadcom,bcm2835-cprman", 1},
+ {NULL, 0}
+};
+
+struct bcm2835_clkman_softc {
+ device_t sc_dev;
+
+ struct resource * sc_m_res;
+ bus_space_tag_t sc_m_bst;
+ bus_space_handle_t sc_m_bsh;
+};
+
+#define BCM_CLKMAN_WRITE(_sc, _off, _val) \
+ bus_space_write_4(_sc->sc_m_bst, _sc->sc_m_bsh, _off, _val)
+#define BCM_CLKMAN_READ(_sc, _off) \
+ bus_space_read_4(_sc->sc_m_bst, _sc->sc_m_bsh, _off)
+
+#define W_CMCLK(_sc, unit, _val) BCM_CLKMAN_WRITE(_sc, unit, 0x5a000000 | (_val))
+#define R_CMCLK(_sc, unit) BCM_CLKMAN_READ(_sc, unit)
+#define W_CMDIV(_sc, unit, _val) BCM_CLKMAN_WRITE(_sc, (unit) + 4, 0x5a000000 | (_val))
+#define R_CMDIV(_sc, unit) BCM_CLKMAN_READ(_sc, (unit) + 4)
+
+static int
+bcm2835_clkman_probe(device_t dev)
+{
+
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
+ return (ENXIO);
+
+ device_set_desc(dev, "BCM283x Clock Manager");
+
+ return (BUS_PROBE_DEFAULT);
+}
+
+static int
+bcm2835_clkman_attach(device_t dev)
+{
+ struct bcm2835_clkman_softc *sc;
+ int rid;
+
+ if (device_get_unit(dev) != 0) {
+ device_printf(dev, "only one clk manager supported\n");
+ return (ENXIO);
+ }
+
+ sc = device_get_softc(dev);
+ sc->sc_dev = dev;
+
+ rid = 0;
+ sc->sc_m_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+ RF_ACTIVE);
+ if (!sc->sc_m_res) {
+ device_printf(dev, "cannot allocate memory window\n");
+ return (ENXIO);
+ }
+
+ sc->sc_m_bst = rman_get_bustag(sc->sc_m_res);
+ sc->sc_m_bsh = rman_get_bushandle(sc->sc_m_res);
+
+ return (bus_generic_attach(dev));
+}
+
+uint32_t
+bcm2835_clkman_set_frequency(device_t dev, uint32_t unit, uint32_t hz)
+{
+ struct bcm2835_clkman_softc *sc;
+ int i;
+ uint32_t u;
+
+ sc = device_get_softc(dev);
+
+ if (unit != BCM_PWM_CLKSRC) {
+ device_printf(sc->sc_dev,
+ "Unsupported unit 0x%x", unit);
+ return (0);
+ }
+
+ W_CMCLK(sc, unit, 6);
+ for (i = 0; i < 10; i++) {
+ u = R_CMCLK(sc, unit);
+ if (!(u&0x80))
+ break;
+ DELAY(1000);
+ }
+ if (u & 0x80) {
+ device_printf(sc->sc_dev,
+ "Failed to stop clock for unit 0x%x", unit);
+ return (0);
+ }
+ if (hz == 0)
+ return (0);
+
+ u = 500000000/hz;
+ if (u < 4) {
+ device_printf(sc->sc_dev,
+ "Frequency too high for unit 0x%x (max: 125MHz)",
+ unit);
+ return (0);
+ }
+ if (u > 0xfff) {
+ device_printf(sc->sc_dev,
+ "Frequency too low for unit 0x%x (min: 123Hz)",
+ unit);
+ return (0);
+ }
+ hz = 500000000/u;
+ W_CMDIV(sc, unit, u << 12);
+
+ W_CMCLK(sc, unit, 0x16);
+ for (i = 0; i < 10; i++) {
+ u = R_CMCLK(sc, unit);
+ if ((u&0x80))
+ break;
+ DELAY(1000);
+ }
+ if (!(u & 0x80)) {
+ device_printf(sc->sc_dev,
+ "Failed to start clock for unit 0x%x", unit);
+ return (0);
+ }
+ return (hz);
+}
+
+static int
+bcm2835_clkman_detach(device_t dev)
+{
+ struct bcm2835_clkman_softc *sc;
+
+ bus_generic_detach(dev);
+
+ sc = device_get_softc(dev);
+ if (sc->sc_m_res)
+ bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_m_res);
+
+ return (0);
+}
+
+static device_method_t bcm2835_clkman_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, bcm2835_clkman_probe),
+ DEVMETHOD(device_attach, bcm2835_clkman_attach),
+ DEVMETHOD(device_detach, bcm2835_clkman_detach),
+
+ DEVMETHOD_END
+};
+
+static devclass_t bcm2835_clkman_devclass;
+static driver_t bcm2835_clkman_driver = {
+ "bcm2835_clkman",
+ bcm2835_clkman_methods,
+ sizeof(struct bcm2835_clkman_softc),
+};
+
+DRIVER_MODULE(bcm2835_clkman, simplebus, bcm2835_clkman_driver,
+ bcm2835_clkman_devclass, 0, 0);
+MODULE_VERSION(bcm2835_clkman, 1);
Added: head/sys/arm/broadcom/bcm2835/bcm2835_clkman.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/broadcom/bcm2835/bcm2835_clkman.h Mon Jan 22 07:10:30 2018 (r328257)
@@ -0,0 +1,43 @@
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright (c) 2017 Poul-Henning Kamp <phk at FreeBSD.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+#ifndef _BCM2835_CLKMAN_H_
+#define _BCM2835_CLKMAN_H_
+
+// Offset into BAR0 for unit
+enum bcm2835_clksrc {
+ BCM_GPIO0_CLKSRC = 0x70,
+ BCM_GPIO1_CLKSRC = 0x78,
+ BCM_GPIO2_CLKSRC = 0x80,
+ BCM_PWM_CLKSRC = 0xa0,
+};
+
+uint32_t bcm2835_clkman_set_frequency(device_t, uint32_t, uint32_t);
+
+#endif /* _BCM2835_CLKMAN_H_ */
Modified: head/sys/arm/broadcom/bcm2835/bcm2835_pwm.c
==============================================================================
--- head/sys/arm/broadcom/bcm2835/bcm2835_pwm.c Mon Jan 22 06:00:45 2018 (r328256)
+++ head/sys/arm/broadcom/bcm2835/bcm2835_pwm.c Mon Jan 22 07:10:30 2018 (r328257)
@@ -42,12 +42,12 @@ __FBSDID("$FreeBSD$");
#include <machine/bus.h>
#include <machine/resource.h>
-#include <machine/intr.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <arm/broadcom/bcm2835/bcm2835_gpio.h>
+#include <arm/broadcom/bcm2835/bcm2835_clkman.h>
static struct ofw_compat_data compat_data[] = {
{"broadcom,bcm2835-pwm", 1},
@@ -62,9 +62,7 @@ struct bcm_pwm_softc {
bus_space_tag_t sc_m_bst;
bus_space_handle_t sc_m_bsh;
- struct resource * sc_clk_res;
- bus_space_tag_t sc_c_bst;
- bus_space_handle_t sc_c_bsh;
+ device_t clkman;
uint32_t freq;
uint32_t period;
@@ -91,15 +89,9 @@ struct bcm_pwm_softc {
#define W_DAT(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x14, _val)
#define R_DAT(_sc) BCM_PWM_MEM_READ(_sc, 0x14)
-#define W_CMCLK(_sc, _val) BCM_PWM_CLK_WRITE(_sc, 0x00, 0x5a000000 | (_val))
-#define R_CMCLK(_sc) BCM_PWM_CLK_READ(_sc, 0x00)
-#define W_CMDIV(_sc, _val) BCM_PWM_CLK_WRITE(_sc, 0x04, 0x5a000000 | (_val))
-#define R_CMDIV(_s) BCM_PWM_CLK_READ(_sc, 0x04)
-
static int
bcm_pwm_reconf(struct bcm_pwm_softc *sc)
{
- int i;
uint32_t u;
device_t gpio;
@@ -107,22 +99,10 @@ bcm_pwm_reconf(struct bcm_pwm_softc *sc)
W_CTL(sc, 0);
/* Stop PWM clock */
- W_CMCLK(sc, 6);
- for (i = 0; i < 10; i++) {
- u = R_CMCLK(sc);
- if (!(u&0x80))
- break;
- DELAY(1000);
- }
- if (u&0x80) {
- device_printf(sc->sc_dev, "Failed to stop clock\n");
- return(EIO);
- }
+ (void)bcm2835_clkman_set_frequency(sc->clkman, BCM_PWM_CLKSRC, 0);
- if (sc->mode == 0) {
- // XXX: GPIO cfg ?
+ if (sc->mode == 0)
return (0);
- }
/* Ask GPIO0 to set ALT0 for pin 12 */
gpio = devclass_get_device(devclass_find("gpio"), 0);
@@ -132,32 +112,11 @@ bcm_pwm_reconf(struct bcm_pwm_softc *sc)
}
bcm_gpio_set_alternate(gpio, 12, BCM_GPIO_ALT0);
- /* Configure divider */
- u = 500000000/sc->freq;
- if (u < 4) {
- device_printf(sc->sc_dev, "Freq too high (max 125MHz)\n");
- return(EINVAL);
- }
- if (u > 0xfff) {
- device_printf(sc->sc_dev, "Freq too low (min 123Hz)\n");
- return(EINVAL);
- }
- sc->freq = 500000000/u;
- W_CMDIV(sc, u << 12);
+ u = bcm2835_clkman_set_frequency(sc->clkman, BCM_PWM_CLKSRC, sc->freq);
+ if (u == 0)
+ return (EINVAL);
+ sc->freq = u;
- /* Start PWM clock */
- W_CMCLK(sc, 0x16);
- for (i = 0; i < 10; i++) {
- u = R_CMCLK(sc);
- if ((u&0x80))
- break;
- DELAY(1000);
- }
- if (!(u&0x80)) {
- device_printf(sc->sc_dev, "Failed to start clock\n");
- return(EIO);
- }
-
/* Config PWM */
W_RNG(sc, sc->period);
if (sc->ratio > sc->period)
@@ -266,19 +225,13 @@ bcm_pwm_reg_proc(SYSCTL_HANDLER_ARGS)
int error;
sc = (struct bcm_pwm_softc *)arg1;
- if (arg2 & 0x100)
- reg = BCM_PWM_CLK_READ(sc, arg2 & 0xff);
- else
- reg = BCM_PWM_MEM_READ(sc, arg2 & 0xff);
+ reg = BCM_PWM_MEM_READ(sc, arg2 & 0xff);
error = sysctl_handle_int(oidp, ®, sizeof(reg), req);
if (error != 0 || req->newptr == NULL)
return (error);
- if (arg2 & 0x100)
- BCM_PWM_CLK_WRITE(sc, arg2 & 0xff, reg);
- else
- BCM_PWM_MEM_WRITE(sc, arg2, reg);
+ BCM_PWM_MEM_WRITE(sc, arg2, reg);
return (0);
}
@@ -301,8 +254,6 @@ bcm_pwm_sysctl_init(struct bcm_pwm_softc *sc)
CTLFLAG_RW | CTLTYPE_UINT, sc, 0x##x, \
bcm_pwm_reg_proc, "IU", "Register 0x" #x " " y);
- RR(100, "PWMCTL")
- RR(104, "PWMDIV")
RR(24, "DAT2")
RR(20, "RNG2")
RR(18, "FIF1")
@@ -335,8 +286,12 @@ static int
bcm_pwm_probe(device_t dev)
{
+#if 0
+ // XXX: default state is disabled in RPI3 DTB, assume for now
+ // XXX: that people want the PWM to work if the KLD this module.
if (!ofw_bus_status_okay(dev))
return (ENXIO);
+#endif
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
return (ENXIO);
@@ -360,6 +315,12 @@ bcm_pwm_attach(device_t dev)
sc = device_get_softc(dev);
sc->sc_dev = dev;
+ sc->clkman = devclass_get_device(devclass_find("bcm2835_clkman"), 0);
+ if (sc->clkman == NULL) {
+ device_printf(dev, "cannot find Clock Manager\n");
+ return (ENXIO);
+ }
+
rid = 0;
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
@@ -371,16 +332,6 @@ bcm_pwm_attach(device_t dev)
sc->sc_m_bst = rman_get_bustag(sc->sc_mem_res);
sc->sc_m_bsh = rman_get_bushandle(sc->sc_mem_res);
- rid = 1;
- sc->sc_clk_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
- RF_ACTIVE);
- if (!sc->sc_clk_res) {
- device_printf(dev, "cannot allocate clock window\n");
- return (ENXIO);
- }
- sc->sc_c_bst = rman_get_bustag(sc->sc_clk_res);
- sc->sc_c_bsh = rman_get_bushandle(sc->sc_clk_res);
-
/* Add sysctl nodes. */
bcm_pwm_sysctl_init(sc);
@@ -400,12 +351,10 @@ bcm_pwm_detach(device_t dev)
bus_generic_detach(dev);
sc = device_get_softc(dev);
- sc->mode = 0;
+ sc->mode = 0;
(void)bcm_pwm_reconf(sc);
if (sc->sc_mem_res)
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
- if (sc->sc_clk_res)
- bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_clk_res);
return (0);
}
@@ -414,17 +363,15 @@ static phandle_t
bcm_pwm_get_node(device_t bus, device_t dev)
{
- /* We only have one child, the SPI bus, which needs our own node. */
return (ofw_bus_get_node(bus));
}
+
static device_method_t bcm_pwm_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, bcm_pwm_probe),
DEVMETHOD(device_attach, bcm_pwm_attach),
DEVMETHOD(device_detach, bcm_pwm_detach),
-
- /* ofw_bus interface */
DEVMETHOD(ofw_bus_get_node, bcm_pwm_get_node),
DEVMETHOD_END
@@ -439,3 +386,4 @@ static driver_t bcm_pwm_driver = {
};
DRIVER_MODULE(bcm2835_pwm, simplebus, bcm_pwm_driver, bcm_pwm_devclass, 0, 0);
+MODULE_DEPEND(bcm2835_pwm, bcm2835_clkman, 1, 1, 1);
Modified: head/sys/dts/arm/bcm2836.dtsi
==============================================================================
--- head/sys/dts/arm/bcm2836.dtsi Mon Jan 22 06:00:45 2018 (r328256)
+++ head/sys/dts/arm/bcm2836.dtsi Mon Jan 22 07:10:30 2018 (r328257)
@@ -389,6 +389,11 @@
};
};
+ cprman {
+ compatible = "broadcom,bcm2835-cprman";
+ reg = <0x101000 0x2000>;
+ };
+
rng {
compatible = "broadcom,bcm2835-rng",
"broadcom,bcm2708-rng";
@@ -427,7 +432,7 @@
pwm0 {
compatible = "broadcom,bcm2835-pwm";
- reg = <0x20c000 0x28>,<0x1010a0 8>;
+ reg = <0x20c000 0x28>;
};
dma: dma {
Modified: head/sys/modules/Makefile
==============================================================================
--- head/sys/modules/Makefile Mon Jan 22 06:00:45 2018 (r328256)
+++ head/sys/modules/Makefile Mon Jan 22 07:10:30 2018 (r328257)
@@ -60,6 +60,7 @@ SUBDIR= \
${_autofs} \
${_auxio} \
${_bce} \
+ ${_bcm283x_clkman} \
${_bcm283x_pwm} \
bfe \
bge \
@@ -808,6 +809,7 @@ _cloudabi64= cloudabi64
.endif
.if ${MACHINE_ARCH:Marmv[67]*} != "" || ${MACHINE_CPUARCH} == "aarch64"
+_bcm283x_clkman= bcm283x_clkman
_bcm283x_pwm= bcm283x_pwm
.endif
More information about the svn-src-all
mailing list