svn commit: r309375 - in stable/11/sys: dev/gpio modules modules/bytgpio
Oleksandr Tymoshenko
gonzo at FreeBSD.org
Thu Dec 1 22:22:21 UTC 2016
Author: gonzo
Date: Thu Dec 1 22:22:19 2016
New Revision: 309375
URL: https://svnweb.freebsd.org/changeset/base/309375
Log:
MFC r308898, r308940, r308942, r308944, r309112
r308898:
[bytgpio] Fix USB disconnect event after listsing pins on gpioc2
- Do not set input flag when reading value from GPIO pin, it is not
required and for gpioc2(S5 bank) setting both input and output flags
leads to some kind of electric interference (curren drop?) that
causes USB devices to disconnect
- Check pad configuration when attaching device and provide IN/OUT
capabilities only for pads that are configured as GPIO. Do not let
user code to configure or change value of non-GPIO pads. There is
no information for NC bank in intel's datasheet so for now function
check is ignored for pins in it
Reported by: Frank H.
MFC after: 3 days
r308940:
[bytgpio] prepare bytgpio(4) for modularization
- Add detach method
- module should depend on gpiobus, not gpio
r308942:
[bytgpio] Add module for bytgpio(4)
MFC after: 3 days
r308944 by hiren@:
r308942 broke kernel build.
Add acpi_if.h to module makefile to fix it.
Submitted by: peter
r309112:
[bytgpio] Fix pc98 build by disabling bytgpio module for this platform
Reported by: dim
Added:
stable/11/sys/modules/bytgpio/
- copied from r308942, head/sys/modules/bytgpio/
Modified:
stable/11/sys/dev/gpio/bytgpio.c
stable/11/sys/modules/Makefile
stable/11/sys/modules/bytgpio/Makefile
Directory Properties:
stable/11/ (props changed)
Modified: stable/11/sys/dev/gpio/bytgpio.c
==============================================================================
--- stable/11/sys/dev/gpio/bytgpio.c Thu Dec 1 22:20:27 2016 (r309374)
+++ stable/11/sys/dev/gpio/bytgpio.c Thu Dec 1 22:22:19 2016 (r309375)
@@ -60,6 +60,16 @@ __FBSDID("$FreeBSD$");
#define BYTGPIO_ASSERT_LOCKED(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED)
#define BYTGPIO_ASSERT_UNLOCKED(_sc) mtx_assert(&(_sc)->sc_mtx, MA_NOTOWNED)
+struct pinmap_info {
+ int reg;
+ int pad_func;
+};
+
+/* Ignore function check, no info is available at the moment */
+#define PADCONF_FUNC_ANY -1
+
+#define GPIO_PIN_MAP(r, f) { .reg = (r), .pad_func = (f) }
+
struct bytgpio_softc {
ACPI_HANDLE sc_handle;
device_t sc_dev;
@@ -69,44 +79,212 @@ struct bytgpio_softc {
struct resource *sc_mem_res;
int sc_npins;
const char* sc_bank_prefix;
- const int *sc_pinpad_map;
+ const struct pinmap_info *sc_pinpad_map;
+ /* List of current functions for pads shared by GPIO */
+ int *sc_pad_funcs;
};
static int bytgpio_probe(device_t dev);
static int bytgpio_attach(device_t dev);
+static int bytgpio_detach(device_t dev);
-#define SCORE_UID 1
-#define SCORE_BANK_PREFIX "GPIO_S0_SC"
-const int bytgpio_score_pins[] = {
- 85, 89, 93, 96, 99, 102, 98, 101, 34, 37, 36, 38, 39, 35, 40,
- 84, 62, 61, 64, 59, 54, 56, 60, 55, 63, 57, 51, 50, 53, 47,
- 52, 49, 48, 43, 46, 41, 45, 42, 58, 44, 95, 105, 70, 68, 67,
- 66, 69, 71, 65, 72, 86, 90, 88, 92, 103, 77, 79, 83, 78, 81,
- 80, 82, 13, 12, 15, 14, 17, 18, 19, 16, 2, 1, 0, 4, 6, 7, 9,
- 8, 33, 32, 31, 30, 29, 27, 25, 28, 26, 23, 21, 20, 24, 22, 5,
- 3, 10, 11, 106, 87, 91, 104, 97, 100
+#define SCORE_UID 1
+#define SCORE_BANK_PREFIX "GPIO_S0_SC"
+const struct pinmap_info bytgpio_score_pins[] = {
+ GPIO_PIN_MAP(85, 0),
+ GPIO_PIN_MAP(89, 0),
+ GPIO_PIN_MAP(93, 0),
+ GPIO_PIN_MAP(96, 0),
+ GPIO_PIN_MAP(99, 0),
+ GPIO_PIN_MAP(102, 0),
+ GPIO_PIN_MAP(98, 0),
+ GPIO_PIN_MAP(101, 0),
+ GPIO_PIN_MAP(34, 0),
+ GPIO_PIN_MAP(37, 0),
+ GPIO_PIN_MAP(36, 0),
+ GPIO_PIN_MAP(38, 0),
+ GPIO_PIN_MAP(39, 0),
+ GPIO_PIN_MAP(35, 0),
+ GPIO_PIN_MAP(40, 0),
+ GPIO_PIN_MAP(84, 0),
+ GPIO_PIN_MAP(62, 0),
+ GPIO_PIN_MAP(61, 0),
+ GPIO_PIN_MAP(64, 0),
+ GPIO_PIN_MAP(59, 0),
+ GPIO_PIN_MAP(54, 0),
+ GPIO_PIN_MAP(56, 0),
+ GPIO_PIN_MAP(60, 0),
+ GPIO_PIN_MAP(55, 0),
+ GPIO_PIN_MAP(63, 0),
+ GPIO_PIN_MAP(57, 0),
+ GPIO_PIN_MAP(51, 0),
+ GPIO_PIN_MAP(50, 0),
+ GPIO_PIN_MAP(53, 0),
+ GPIO_PIN_MAP(47, 0),
+ GPIO_PIN_MAP(52, 0),
+ GPIO_PIN_MAP(49, 0),
+ GPIO_PIN_MAP(48, 0),
+ GPIO_PIN_MAP(43, 0),
+ GPIO_PIN_MAP(46, 0),
+ GPIO_PIN_MAP(41, 0),
+ GPIO_PIN_MAP(45, 0),
+ GPIO_PIN_MAP(42, 0),
+ GPIO_PIN_MAP(58, 0),
+ GPIO_PIN_MAP(44, 0),
+ GPIO_PIN_MAP(95, 0),
+ GPIO_PIN_MAP(105, 0),
+ GPIO_PIN_MAP(70, 0),
+ GPIO_PIN_MAP(68, 0),
+ GPIO_PIN_MAP(67, 0),
+ GPIO_PIN_MAP(66, 0),
+ GPIO_PIN_MAP(69, 0),
+ GPIO_PIN_MAP(71, 0),
+ GPIO_PIN_MAP(65, 0),
+ GPIO_PIN_MAP(72, 0),
+ GPIO_PIN_MAP(86, 0),
+ GPIO_PIN_MAP(90, 0),
+ GPIO_PIN_MAP(88, 0),
+ GPIO_PIN_MAP(92, 0),
+ GPIO_PIN_MAP(103, 0),
+ GPIO_PIN_MAP(77, 0),
+ GPIO_PIN_MAP(79, 0),
+ GPIO_PIN_MAP(83, 0),
+ GPIO_PIN_MAP(78, 0),
+ GPIO_PIN_MAP(81, 0),
+ GPIO_PIN_MAP(80, 0),
+ GPIO_PIN_MAP(82, 0),
+ GPIO_PIN_MAP(13, 0),
+ GPIO_PIN_MAP(12, 0),
+ GPIO_PIN_MAP(15, 0),
+ GPIO_PIN_MAP(14, 0),
+ GPIO_PIN_MAP(17, 0),
+ GPIO_PIN_MAP(18, 0),
+ GPIO_PIN_MAP(19, 0),
+ GPIO_PIN_MAP(16, 0),
+ GPIO_PIN_MAP(2, 0),
+ GPIO_PIN_MAP(1, 0),
+ GPIO_PIN_MAP(0, 0),
+ GPIO_PIN_MAP(4, 0),
+ GPIO_PIN_MAP(6, 0),
+ GPIO_PIN_MAP(7, 0),
+ GPIO_PIN_MAP(9, 0),
+ GPIO_PIN_MAP(8, 0),
+ GPIO_PIN_MAP(33, 0),
+ GPIO_PIN_MAP(32, 0),
+ GPIO_PIN_MAP(31, 0),
+ GPIO_PIN_MAP(30, 0),
+ GPIO_PIN_MAP(29, 0),
+ GPIO_PIN_MAP(27, 0),
+ GPIO_PIN_MAP(25, 0),
+ GPIO_PIN_MAP(28, 0),
+ GPIO_PIN_MAP(26, 0),
+ GPIO_PIN_MAP(23, 0),
+ GPIO_PIN_MAP(21, 0),
+ GPIO_PIN_MAP(20, 0),
+ GPIO_PIN_MAP(24, 0),
+ GPIO_PIN_MAP(22, 0),
+ GPIO_PIN_MAP(5, 1),
+ GPIO_PIN_MAP(3, 1),
+ GPIO_PIN_MAP(10, 0),
+ GPIO_PIN_MAP(11, 0),
+ GPIO_PIN_MAP(106, 0),
+ GPIO_PIN_MAP(87, 0),
+ GPIO_PIN_MAP(91, 0),
+ GPIO_PIN_MAP(104, 0),
+ GPIO_PIN_MAP(97, 0),
+ GPIO_PIN_MAP(100, 0)
};
-#define SCORE_PINS nitems(bytgpio_score_pins)
-#define NCORE_UID 2
-#define NCORE_BANK_PREFIX "GPIO_S0_NC"
-const int bytgpio_ncore_pins[] = {
- 19, 18, 17, 20, 21, 22, 24, 25, 23, 16, 14, 15, 12, 26, 27,
- 1, 4, 8, 11, 0, 3, 6, 10, 13, 2, 5, 9, 7
+#define SCORE_PINS nitems(bytgpio_score_pins)
+
+#define NCORE_UID 2
+#define NCORE_BANK_PREFIX "GPIO_S0_NC"
+const struct pinmap_info bytgpio_ncore_pins[] = {
+ GPIO_PIN_MAP(19, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(18, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(17, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(20, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(21, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(22, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(24, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(25, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(23, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(16, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(14, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(15, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(12, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(26, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(27, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(1, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(4, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(8, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(11, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(0, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(3, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(6, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(10, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(13, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(2, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(5, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(9, PADCONF_FUNC_ANY),
+ GPIO_PIN_MAP(7, PADCONF_FUNC_ANY)
};
#define NCORE_PINS nitems(bytgpio_ncore_pins)
-#define SUS_UID 3
-#define SUS_BANK_PREFIX "GPIO_S5_"
-const int bytgpio_sus_pins[] = {
- 29, 33, 30, 31, 32, 34, 36, 35, 38, 37, 18, 7, 11, 20, 17, 1,
- 8, 10, 19, 12, 0, 2, 23, 39, 28, 27, 22, 21, 24, 25, 26, 51,
- 56, 54, 49, 55, 48, 57, 50, 58, 52, 53, 59, 40
+#define SUS_UID 3
+#define SUS_BANK_PREFIX "GPIO_S5_"
+const struct pinmap_info bytgpio_sus_pins[] = {
+ GPIO_PIN_MAP(29, 0),
+ GPIO_PIN_MAP(33, 0),
+ GPIO_PIN_MAP(30, 0),
+ GPIO_PIN_MAP(31, 0),
+ GPIO_PIN_MAP(32, 0),
+ GPIO_PIN_MAP(34, 0),
+ GPIO_PIN_MAP(36, 0),
+ GPIO_PIN_MAP(35, 0),
+ GPIO_PIN_MAP(38, 0),
+ GPIO_PIN_MAP(37, 0),
+ GPIO_PIN_MAP(18, 0),
+ GPIO_PIN_MAP(7, 1),
+ GPIO_PIN_MAP(11, 1),
+ GPIO_PIN_MAP(20, 1),
+ GPIO_PIN_MAP(17, 1),
+ GPIO_PIN_MAP(1, 1),
+ GPIO_PIN_MAP(8, 1),
+ GPIO_PIN_MAP(10, 1),
+ GPIO_PIN_MAP(19, 1),
+ GPIO_PIN_MAP(12, 1),
+ GPIO_PIN_MAP(0, 1),
+ GPIO_PIN_MAP(2, 1),
+ GPIO_PIN_MAP(23, 0),
+ GPIO_PIN_MAP(39, 0),
+ GPIO_PIN_MAP(28, 0),
+ GPIO_PIN_MAP(27, 0),
+ GPIO_PIN_MAP(22, 0),
+ GPIO_PIN_MAP(21, 0),
+ GPIO_PIN_MAP(24, 0),
+ GPIO_PIN_MAP(25, 0),
+ GPIO_PIN_MAP(26, 0),
+ GPIO_PIN_MAP(51, 0),
+ GPIO_PIN_MAP(56, 0),
+ GPIO_PIN_MAP(54, 0),
+ GPIO_PIN_MAP(49, 0),
+ GPIO_PIN_MAP(55, 0),
+ GPIO_PIN_MAP(48, 0),
+ GPIO_PIN_MAP(57, 0),
+ GPIO_PIN_MAP(50, 0),
+ GPIO_PIN_MAP(58, 0),
+ GPIO_PIN_MAP(52, 0),
+ GPIO_PIN_MAP(53, 0),
+ GPIO_PIN_MAP(59, 0),
+ GPIO_PIN_MAP(40, 0)
};
+
#define SUS_PINS nitems(bytgpio_sus_pins)
-#define BYGPIO_PIN_REGISTER(sc, pin, reg) ((sc)->sc_pinpad_map[(pin)] * 16 + (reg))
+#define BYGPIO_PIN_REGISTER(sc, pin, r) ((sc)->sc_pinpad_map[(pin)].reg * 16 + (r))
#define BYTGPIO_PCONF0 0x0000
+#define BYTGPIO_PCONF0_FUNC_MASK 7
#define BYTGPIO_PAD_VAL 0x0008
#define BYTGPIO_PAD_VAL_LEVEL (1 << 0)
#define BYTGPIO_PAD_VAL_I_OUTPUT_ENABLED (1 << 1)
@@ -158,6 +336,19 @@ bytgpio_valid_pin(struct bytgpio_softc *
return (0);
}
+/*
+ * Returns true if pad configured to be used as GPIO
+ */
+static bool
+bytgpio_pad_is_gpio(struct bytgpio_softc *sc, int pin)
+{
+ if ((sc->sc_pinpad_map[pin].pad_func == PADCONF_FUNC_ANY) ||
+ (sc->sc_pad_funcs[pin] == sc->sc_pinpad_map[pin].pad_func))
+ return (true);
+ else
+ return (false);
+}
+
static int
bytgpio_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps)
{
@@ -167,7 +358,9 @@ bytgpio_pin_getcaps(device_t dev, uint32
if (bytgpio_valid_pin(sc, pin) != 0)
return (EINVAL);
- *caps = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT;
+ *caps = 0;
+ if (bytgpio_pad_is_gpio(sc, pin))
+ *caps = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT;
return (0);
}
@@ -182,11 +375,14 @@ bytgpio_pin_getflags(device_t dev, uint3
if (bytgpio_valid_pin(sc, pin) != 0)
return (EINVAL);
+ *flags = 0;
+ if (!bytgpio_pad_is_gpio(sc, pin))
+ return (0);
+
/* Get the current pin state */
BYTGPIO_LOCK(sc);
reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
val = bytgpio_read_4(sc, reg);
- *flags = 0;
if ((val & BYTGPIO_PAD_VAL_I_OUTPUT_ENABLED) == 0)
*flags |= GPIO_PIN_OUTPUT;
/*
@@ -211,7 +407,10 @@ bytgpio_pin_setflags(device_t dev, uint3
if (bytgpio_valid_pin(sc, pin) != 0)
return (EINVAL);
- allowed = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT;
+ if (bytgpio_pad_is_gpio(sc, pin))
+ allowed = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT;
+ else
+ allowed = 0;
/*
* Only directtion flag allowed
@@ -266,6 +465,9 @@ bytgpio_pin_set(device_t dev, uint32_t p
if (bytgpio_valid_pin(sc, pin) != 0)
return (EINVAL);
+ if (!bytgpio_pad_is_gpio(sc, pin))
+ return (EINVAL);
+
BYTGPIO_LOCK(sc);
reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
val = bytgpio_read_4(sc, reg);
@@ -288,16 +490,17 @@ bytgpio_pin_get(device_t dev, uint32_t p
sc = device_get_softc(dev);
if (bytgpio_valid_pin(sc, pin) != 0)
return (EINVAL);
+ /*
+ * Report non-GPIO pads as pin LOW
+ */
+ if (!bytgpio_pad_is_gpio(sc, pin)) {
+ *value = GPIO_PIN_LOW;
+ return (0);
+ }
BYTGPIO_LOCK(sc);
reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
/*
- * Enable input to read current value
- */
- val = bytgpio_read_4(sc, reg);
- val = val & ~BYTGPIO_PAD_VAL_I_INPUT_ENABLED;
- bytgpio_write_4(sc, reg, val);
- /*
* And read actual value
*/
val = bytgpio_read_4(sc, reg);
@@ -320,6 +523,9 @@ bytgpio_pin_toggle(device_t dev, uint32_
if (bytgpio_valid_pin(sc, pin) != 0)
return (EINVAL);
+ if (!bytgpio_pad_is_gpio(sc, pin))
+ return (EINVAL);
+
/* Toggle the pin */
BYTGPIO_LOCK(sc);
reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
@@ -350,6 +556,8 @@ bytgpio_attach(device_t dev)
struct bytgpio_softc *sc;
ACPI_STATUS status;
int uid;
+ int pin;
+ uint32_t reg, val;
sc = device_get_softc(dev);
sc->sc_dev = dev;
@@ -360,6 +568,8 @@ bytgpio_attach(device_t dev)
return (ENXIO);
}
+ BYTGPIO_LOCK_INIT(sc);
+
switch (uid) {
case SCORE_UID:
sc->sc_npins = SCORE_PINS;
@@ -378,8 +588,12 @@ bytgpio_attach(device_t dev)
break;
default:
device_printf(dev, "invalid _UID value: %d\n", uid);
+ goto error;
}
+ sc->sc_pad_funcs = malloc(sizeof(int)*sc->sc_npins, M_DEVBUF,
+ M_WAITOK | M_ZERO);
+
sc->sc_mem_rid = 0;
sc->sc_mem_res = bus_alloc_resource_any(sc->sc_dev,
SYS_RES_MEMORY, &sc->sc_mem_rid, RF_ACTIVE);
@@ -388,7 +602,11 @@ bytgpio_attach(device_t dev)
goto error;
}
- BYTGPIO_LOCK_INIT(sc);
+ for (pin = 0; pin < sc->sc_npins; pin++) {
+ reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PCONF0);
+ val = bytgpio_read_4(sc, reg);
+ sc->sc_pad_funcs[pin] = val & BYTGPIO_PCONF0_FUNC_MASK;
+ }
sc->sc_busdev = gpiobus_attach_bus(dev);
if (sc->sc_busdev == NULL) {
@@ -401,13 +619,39 @@ bytgpio_attach(device_t dev)
return (0);
error:
+ BYTGPIO_LOCK_DESTROY(sc);
+
return (ENXIO);
}
+
+static int
+bytgpio_detach(device_t dev)
+{
+ struct bytgpio_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ if (sc->sc_busdev)
+ gpiobus_detach_bus(dev);
+
+ BYTGPIO_LOCK_DESTROY(sc);
+
+ if (sc->sc_pad_funcs)
+ free(sc->sc_pad_funcs, M_DEVBUF);
+
+ if (sc->sc_mem_res != NULL)
+ bus_release_resource(dev, SYS_RES_MEMORY,
+ sc->sc_mem_rid, sc->sc_mem_res);
+
+ return (0);
+}
+
static device_method_t bytgpio_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, bytgpio_probe),
DEVMETHOD(device_attach, bytgpio_attach),
+ DEVMETHOD(device_detach, bytgpio_detach),
/* GPIO protocol */
DEVMETHOD(gpio_get_bus, bytgpio_get_bus),
@@ -432,4 +676,4 @@ static driver_t bytgpio_driver = {
static devclass_t bytgpio_devclass;
DRIVER_MODULE(bytgpio, acpi, bytgpio_driver, bytgpio_devclass, 0, 0);
MODULE_DEPEND(bytgpio, acpi, 1, 1, 1);
-MODULE_DEPEND(bytgpio, gpio, 1, 1, 1);
+MODULE_DEPEND(bytgpio, gpiobus, 1, 1, 1);
Modified: stable/11/sys/modules/Makefile
==============================================================================
--- stable/11/sys/modules/Makefile Thu Dec 1 22:20:27 2016 (r309374)
+++ stable/11/sys/modules/Makefile Thu Dec 1 22:22:19 2016 (r309375)
@@ -61,6 +61,7 @@ SUBDIR= \
bwi \
bwn \
bwn_pci \
+ ${_bytgpio} \
cam \
${_canbepm} \
${_canbus} \
@@ -601,6 +602,7 @@ _amdsbwd= amdsbwd
_amdtemp= amdtemp
_arcmsr= arcmsr
_asmc= asmc
+_bytgpio= bytgpio
_ciss= ciss
_cmx= cmx
_coretemp= coretemp
Modified: stable/11/sys/modules/bytgpio/Makefile
==============================================================================
--- head/sys/modules/bytgpio/Makefile Mon Nov 21 19:47:37 2016 (r308942)
+++ stable/11/sys/modules/bytgpio/Makefile Thu Dec 1 22:22:19 2016 (r309375)
@@ -3,6 +3,6 @@
.PATH: ${.CURDIR}/../../dev/gpio
KMOD= bytgpio
SRCS= bytgpio.c
-SRCS+= device_if.h bus_if.h gpio_if.h
+SRCS+= acpi_if.h device_if.h bus_if.h gpio_if.h
.include <bsd.kmod.mk>
More information about the svn-src-all
mailing list