svn commit: r262440 - head/sys/boot/fdt/dts

[Luiz Otavio O Souza]

Author: loos
Date: Mon Feb 24 12:45:03 2014
New Revision: 262440
URL: http://svnweb.freebsd.org/changeset/base/262440

Log:
  Enable the second and the third I2C controllers on Beaglebone-black.
  
  The first I2C controller is only used to manage the on-board devices (PMIC
  and HDMI framer) and its bus is not exposed on the expasion headers.
  
  With this change the following pins on the P9 expansion headers are now
  reserved as I2C pins:
  
   Pin 17 - I2C1 SCL
   Pin 18 - I2C1 SDA
   Pin 19 - I2C2 SCL
   Pin 20 - I2C2 SDA
  
  The I2C2 is the bus that should be used to read the contents of cape
  eeproms.
  
  Approved by:	adrian (mentor, implicit)

Modified:
  head/sys/boot/fdt/dts/am335x.dtsi
  head/sys/boot/fdt/dts/beaglebone-black.dts

Modified: head/sys/boot/fdt/dts/am335x.dtsi
==============================================================================
--- head/sys/boot/fdt/dts/am335x.dtsi	Mon Feb 24 10:44:42 2014	(r262439)
+++ head/sys/boot/fdt/dts/am335x.dtsi	Mon Feb 24 12:45:03 2014	(r262440)
@@ -210,6 +210,26 @@
 			i2c-device-id = <0>;
 		};
 
+		i2c1: i2c at 4802a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,i2c";
+			reg =<  0x4802a000 0x1000 >;
+			interrupts = <71>;
+			interrupt-parent = <&AINTC>;
+			i2c-device-id = <1>;
+		};
+
+		i2c2: i2c at 4819c000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,i2c";
+			reg =<  0x4819c000 0x1000 >;
+			interrupts = <30>;
+			interrupt-parent = <&AINTC>;
+			i2c-device-id = <2>;
+		};
+
 		pwm at 48300000 {
 			compatible = "ti,am335x-pwm";
 			#address-cells = <1>;

Modified: head/sys/boot/fdt/dts/beaglebone-black.dts
==============================================================================
--- head/sys/boot/fdt/dts/beaglebone-black.dts	Mon Feb 24 10:44:42 2014	(r262439)
+++ head/sys/boot/fdt/dts/beaglebone-black.dts	Mon Feb 24 12:45:03 2014	(r262440)
@@ -52,6 +52,12 @@
 				/* I2C0 */
 				"I2C0_SDA", "I2C0_SDA","i2c",
 				"I2C0_SCL", "I2C0_SCL","i2c",
+				/* I2C1 */
+				"SPI0_D1", "I2C1_SDA", "i2c",
+				"SPI0_CS0", "I2C1_SCL", "i2c",
+				/* I2C2 */
+				"UART1_CTSn", "I2C2_SDA", "i2c",
+				"UART1_RTSn", "I2C2_SCL", "i2c",
 				/* Ethernet */
 				"MII1_RX_ER", "gmii1_rxerr", "input_pulldown",
 				"MII1_TX_EN", "gmii1_txen", "output",