svn commit: r269134 - head/sys/vm

Adrian Chadd adrian at freebsd.org
Fri Aug 29 00:20:58 UTC 2014 

Just tried it, it didn't work:

RedBoot> load kernel.RSPRO

Using default protocol (TFTP)

Entry point: 0x80050100, address range: 0x80050000-0x805b11cc

RedBoot>

RedBoot> go

CPU platform: Atheros AR7161 rev 2

CPU Frequency=720 MHz

CPU DDR Frequency=360 MHz

CPU AHB Frequency=180 MHz

platform frequency: 720 MHz

CPU reference clock: 40 MHz

CPU MDIO clock: 40 MHz

arguments:

  a0 = 80050100

  a1 = 8ffffff0

  a2 = 00000001

  a3 = 00000007

Cmd line:

Environment:

envp is invalid

Cache info:

  picache_stride    = 4096

  picache_loopcount = 16

  pdcache_stride    = 4096

  pdcache_loopcount = 8

cpu0: MIPS Technologies processor v116.147

  MMU: Standard TLB, 16 entries

  L1 i-cache: 4 ways of 512 sets, 32 bytes per line

  L1 d-cache: 4 ways of 256 sets, 32 bytes per line

  Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>

  Config3=0x20

KDB: debugger backends: ddb

KDB: current backend: ddb

Copyright (c) 1992-2014 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 11.0-CURRENT #3 r269799: Fri Aug 29 00:17:22 UTC 2014

    adrian at adrian-hackbox:/usr/home/adrian/work/freebsd/embedded/head/obj/mips/mips.mips/usr/home/adrian/work/freebsd/embedded/head/src/sys/RSPRO
mips

gcc version 4.2.1 20070831 patched [FreeBSD]

WARNING: WITNESS option enabled, expect reduced performance.

MEMGUARD DEBUGGING ALLOCATOR INITIALIZED:

        MEMGUARD map base: 0xc0800000

        MEMGUARD map size: 45696 KBytes

real memory  = 33554432 (32768K bytes)

avail memory = 22806528 (21MB)

random device not loaded; using insecure entropy

random: <Software, Yarrow> initialized

nexus0: <MIPS32 root nexus>

clock0: <Generic MIPS32 ticker> on nexus0

Timecounter "MIPS32" frequency 360000000 Hz quality 800

Event timer "MIPS32" frequency 360000000 Hz quality 800

argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO
controller> at mem 0x19000000-0x19000fff on nexus0

mdio0: <MDIO> on argemdio0

mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0

arswitch0: <Atheros AR8316 Ethernet Switch> on mdio0

arswitch0: ar8316_hw_setup: MAC port == RGMII, port 4 = dedicated PHY

arswitch0: ar8316_hw_setup: port 4 RGMII workaround

miibus0: <MII bus> on arswitch0

ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0

ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto

miibus1: <MII bus> on arswitch0

ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1

ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto

miibus2: <MII bus> on arswitch0

ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2

ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto

miibus3: <MII bus> on arswitch0

ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3

ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto

etherswitch0: <Switch controller> on arswitch0

mdio1: <MDIO> on arswitch0

mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1

apb0 at irq 4 on nexus0

uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0

uart0: console (115200,n,8,1)

gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0

gpio0: [GIANT-LOCKED]

gpio0: function_set: 0x0

gpio0: function_clear: 0x0

gpio0: gpio pinmask=0xff

gpioc0: <GPIO controller> on gpio0

gpiobus0: <GPIO bus> on gpio0

gpioled0: <GPIO led> at pin(s) 2 on gpiobus0

ehci0: <AR71XX Integrated USB 2.0 controller> at mem
0x1b000000-0x1bffffff irq 1 on nexus0

usbus0: set host controller mode

usbus0: EHCI version 1.0

usbus0: set host controller mode

usbus0 on ehci0

pcib0 at irq 0 on nexus0

pcib0: ar71xx_pci_attach: missing hint 'baseslot', default to
AR71XX_PCI_BASE_SLOT

pci0: <PCI bus> on pcib0

ath0: <Atheros 9220> irq 0 at device 17.0 on pci0

[ath] enabling AN_TOP2_FIXUP

ath0: [HT] enabling HT modes

ath0: [HT] 1 stream STBC receive enabled

ath0: [HT] 1 stream STBC transmit enabled

ath0: [HT] 2 RX streams; 2 TX streams

ath0: AR9220 mac 128.2 RF5133 phy 13.0

ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0

ath1: <Atheros 9220> irq 1 at device 18.0 on pci0

[ath] enabling AN_TOP2_FIXUP

ath1: [HT] enabling HT modes

ath1: [HT] 1 stream STBC receive enabled

ath1: [HT] 1 stream STBC transmit enabled

ath1: [HT] 2 RX streams; 2 TX streams

ath1: AR9220 mac 128.2 RF5133 phy 13.0

ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0

arge0: <Atheros AR71xx built-in ethernet interface> at mem
0x19000000-0x19000fff irq 2 on nexus0

arge0: arge_attach: overriding MII mode to 'RGMII'

miiproxy0: <MII/MDIO proxy, MII side> on arge0

miiproxy0: attached to target mdio1

arge0: finishing attachment, phymask 0010, proxy set

miibus4: <MII bus> on miiproxy0

ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4

ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto

arge0: Ethernet address: 62:73:64:c5:94:0b

arge1: <Atheros AR71xx built-in ethernet interface> at mem
0x1a000000-0x1a000fff irq 3 on nexus0

arge1: arge_attach: overriding MII mode to 'RGMII'

arge1: finishing attachment, phymask 0000, proxy null

arge1: Ethernet address: 62:73:64:94:c2:8e

spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0

spibus0: <spibus bus> on spi0

mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0

mx25l0: mx25ll128, sector 65536 bytes, 256 sectors

ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0

Timecounters tick every 1.000 msec

arswitch0port1: link state changed to DOWN

arswitch0port2: link state changed to DOWN

arswitch0port3: link state changed to DOWN

arswitch0port4: link state changed to DOWN

usbus0: 480Mbps High Speed USB v2.0

ugen0.1: <Atheros> at usbus0

uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0

g_dev_taste: make_dev_p() failed (gp->name=redboot/RedBoot config, error=22)

g_dev_taste: make_dev_p() failed (gp->name=redboot/FIS directory, error=22)

redboot/rootfs.uzip: 1102 x 16384 blocks

random: unblocking device.

WARNING: WITNESS option enabled, expect reduced performance.

Root mount waiting for: usbus0

uhub0: 2 ports with 2 removable, self powered

Root mount waiting for: usbus0

Root mount waiting for: usbus0

Root mount waiting for: usbus0

ugen0.2: <Generic> at usbus0

umass0: <Generic USB Storage, class 0/0, rev 2.00/94.51, addr 2> on usbus0

umass0:  SCSI over Bulk-Only; quirks = 0x4100

umass0:0:0: Attached to scbus0

Trying to mount root from ufs:redboot/rootfs.uzip []...

warning: no time-of-day clock registered, system time will not be set accurately

da0 at umass-sim0 bus 0 scbus0 target 0 lun 0

da0: <Generic STORAGE DEVICE 9451> Removable Direct Access SCSI-0 device

da0: Serial Number 000000009451

da0: 40.000MB/s transfers

da0: 3902MB (7991296 512 byte sectors: 255H 63S/T 497C)

da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>

Aug 28 08:07:57 init: login_getclass: unknown class 'daemon'

BAD_PAGE_FAULT: pid 27 tid 100045 (mount), uid 0: pc 0x40514dd0 got a
read fault (type 0x2) at 0x4040011c

Trapframe Register Dump:

        zero: 0 at: 0x7fffffff  v0: 0   v1: 0x404000fc

        a0: 0x54        a1: 0x40400000  a2: 0   a3: 0x1

        t0: 0   t1: 0x40c0300c  t2: 0x40800168  t3: 0x2f

        t4: 0x40c00030  t5: 0   t6: 0x748       t7: 0x402c70

        t8: 0x13        t9: 0x40514d58  s0: 0x3 s1: 0x40418798

        s2: 0   s3: 0x404ec4    s4: 0x40418798  s5: 0x40418798

        s6: 0   s7: 0   k0: 0   k1: 0

        gp: 0x405ec910  sp: 0x7ffee348  s8: 0   ra: 0x4051534c

        sr: 0xfc13      mullo: 0x6719   mulhi: 0xc      badvaddr: 0x4040011c

        cause: 0x8      pc: 0x40514dd0

Page table info for pc address 0x40514dd0: pde = 0x813c4000, pte = 0xa0057b9a

Dumping 4 words starting at pc address 0x40514dd0:

8c700020 32030ff0 00032102 240300ff

Page table info for bad address 0x4040011c: pde = 0x813c4000, pte = 0

pid 27 (mount), uid 0: exited on signal 11

BAD_PAGE_FAULT: pid 32 tid 100045 (mount), uid 0: pc 0x40514dd0 got a
read fault (type 0x2) at 0x4040011c

Trapframe Register Dump:

        zero: 0 at: 0x7fffffff  v0: 0   v1: 0x404000fc

        a0: 0x54        a1: 0x40400000  a2: 0   a3: 0x1

        t0: 0   t1: 0x40c0300c  t2: 0x40800168  t3: 0x2f

        t4: 0x40c00030  t5: 0   t6: 0x748       t7: 0x402c70

        t8: 0x13        t9: 0x40514d58  s0: 0x3 s1: 0x40418798

        s2: 0   s3: 0x404ec4    s4: 0x40418798  s5: 0x40418798

        s6: 0   s7: 0   k0: 0   k1: 0

        gp: 0x405ec910  sp: 0x7ffee348  s8: 0   ra: 0x4051534c

        sr: 0xfc13      mullo: 0x6719   mulhi: 0xc      badvaddr: 0x4040011c

        cause: 0x8      pc: 0x40514dd0

Page table info for pc address 0x40514dd0: pde = 0x813c7000, pte = 0xa0057b9a

Dumping 4 words starting at pc address 0x40514dd0:

8c700020 32030ff0 00032102 240300ff

Page table info for bad address 0x4040011c: pde = 0x813c7000, pte = 0

pid 32 (mount), uid 0: exited on signal 11

cp: /etc/rc.d: Read-only file system

ln: /etc//termcap: Read-only file system

exec: /etc/rc2: not found

Enter full pathname of shell or RETURN for /bin/sh:

Note that this board has more RAM than Hiren's. I don't know what that
may change.




-a

More information about the svn-src-all mailing list