svn commit: r270243 - in stable/10: share/man/man4 sys/arm/broadcom/bcm2835 sys/arm/ti sys/boot/fdt/dts/arm
Luiz Otavio O Souza
loos at FreeBSD.org
Wed Aug 20 19:37:07 UTC 2014
Author: loos
Date: Wed Aug 20 19:37:05 2014
New Revision: 270243
URL: http://svnweb.freebsd.org/changeset/base/270243
Log:
MFC r267021:
FreeBSD, historically, has always used 8-bit addresses for i2c devices
(7-bit device address << 1), always leaving the room for the read/write
bit.
This commit convert ti_i2c and revert r259127 on bcm2835_bsc to make them
compatible with 8-bit addresses. Previous to this commit an i2c device
would have different addresses depending on the controller it was attached
to (by example, when compared to any iicbb(4) based i2c controller), which
was a pretty annoying behavior.
Also, update the PMIC i2c address on beaglebone* DTS files to match the
new address scheme.
Now the userland utilities need to do the correct slave address shifting
(but it is going to work with any i2c controller on the system).
Discussed with: ian
MFC r267834:
Clarify the expected usage of I2C 7-bit slave addresses on ioctl(2)
interface.
While here add the cross reference to iic(4) on iicbus(4).
CR: D210
Suggested by: jmg
Modified:
stable/10/share/man/man4/iic.4
stable/10/share/man/man4/iicbus.4
stable/10/sys/arm/broadcom/bcm2835/bcm2835_bsc.c
stable/10/sys/arm/ti/ti_i2c.c
stable/10/sys/boot/fdt/dts/arm/beaglebone-black.dts
stable/10/sys/boot/fdt/dts/arm/beaglebone.dts
Directory Properties:
stable/10/ (props changed)
Modified: stable/10/share/man/man4/iic.4
==============================================================================
--- stable/10/share/man/man4/iic.4 Wed Aug 20 19:30:58 2014 (r270242)
+++ stable/10/share/man/man4/iic.4 Wed Aug 20 19:37:05 2014 (r270243)
@@ -25,7 +25,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd September 6, 2006
+.Dd June 24, 2014
.Dt IIC 4
.Os
.Sh NAME
@@ -51,12 +51,20 @@ following ioctls:
Sends the start condition to the slave specified by the
.Va slave
element to the bus.
+The
+.Va slave
+element consists of a 7-bit address and a read/write bit
+(i.e., 7-bit address << 1 | r/w).
+If the read/write bit is set a read operation is initiated, if the read/write
+bit is cleared a write operation is initiated.
All other elements are ignored.
.It Dv I2CRPTSTART
.Pq Vt "struct iiccmd"
Sends the repeated start condition to the slave specified by the
.Va slave
element to the bus.
+The slave address should be specified as in
+.Dv I2CSTART .
All other elements are ignored.
.It Dv I2CSTOP
No argument is passed.
@@ -115,10 +123,15 @@ is set in
Otherwise the transfer is a write transfer.
The
.Va slave
-element specifies the 7-bit address for the transfer.
+element specifies the 7-bit address with the read/write bit for the transfer.
+The read/write bit will be handled by the iicbus stack based on the specified
+transfer operation.
The
.Va len
-element is the length of the data.
+element is the number of
+.Pq Vt "struct iic_msg"
+messages encoded on
+.Pq Vt "struct iic_rdwr_data" .
The
.Va buf
element is a buffer for that data.
Modified: stable/10/share/man/man4/iicbus.4
==============================================================================
--- stable/10/share/man/man4/iicbus.4 Wed Aug 20 19:30:58 2014 (r270242)
+++ stable/10/share/man/man4/iicbus.4 Wed Aug 20 19:37:05 2014 (r270243)
@@ -24,7 +24,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd August 6, 1998
+.Dd June 24, 2014
.Dt IICBUS 4
.Os
.Sh NAME
@@ -104,6 +104,7 @@ Some I2C interfaces are available:
.It Sy bktr Ta "Brooktree848 video chipset, hardware and software master-only interface"
.El
.Sh SEE ALSO
+.Xr iic 4 ,
.Xr iicbb 4 ,
.Xr lpbb 4 ,
.Xr pcf 4
Modified: stable/10/sys/arm/broadcom/bcm2835/bcm2835_bsc.c
==============================================================================
--- stable/10/sys/arm/broadcom/bcm2835/bcm2835_bsc.c Wed Aug 20 19:30:58 2014 (r270242)
+++ stable/10/sys/arm/broadcom/bcm2835/bcm2835_bsc.c Wed Aug 20 19:37:05 2014 (r270243)
@@ -407,7 +407,7 @@ bcm_bsc_transfer(device_t dev, struct ii
for (i = 0; i < nmsgs; i++) {
/* Write the slave address. */
- BCM_BSC_WRITE(sc, BCM_BSC_SLAVE, msgs[i].slave);
+ BCM_BSC_WRITE(sc, BCM_BSC_SLAVE, msgs[i].slave >> 1);
/* Write the data length. */
BCM_BSC_WRITE(sc, BCM_BSC_DLEN, msgs[i].len);
Modified: stable/10/sys/arm/ti/ti_i2c.c
==============================================================================
--- stable/10/sys/arm/ti/ti_i2c.c Wed Aug 20 19:30:58 2014 (r270242)
+++ stable/10/sys/arm/ti/ti_i2c.c Wed Aug 20 19:37:05 2014 (r270243)
@@ -747,7 +747,7 @@ ti_i2c_transfer(device_t dev, struct iic
}
/* set the slave address */
- ti_i2c_write_reg(sc, I2C_REG_SA, msgs[i].slave);
+ ti_i2c_write_reg(sc, I2C_REG_SA, msgs[i].slave >> 1);
/* perform the read or write */
if (msgs[i].flags & IIC_M_RD) {
Modified: stable/10/sys/boot/fdt/dts/arm/beaglebone-black.dts
==============================================================================
--- stable/10/sys/boot/fdt/dts/arm/beaglebone-black.dts Wed Aug 20 19:30:58 2014 (r270242)
+++ stable/10/sys/boot/fdt/dts/arm/beaglebone-black.dts Wed Aug 20 19:37:05 2014 (r270243)
@@ -149,7 +149,7 @@
i2c at 44e0b000 {
pmic at 24 {
compatible = "ti,am335x-pmic";
- reg = <0x24>;
+ reg = <0x48>;
};
};
};
Modified: stable/10/sys/boot/fdt/dts/arm/beaglebone.dts
==============================================================================
--- stable/10/sys/boot/fdt/dts/arm/beaglebone.dts Wed Aug 20 19:30:58 2014 (r270242)
+++ stable/10/sys/boot/fdt/dts/arm/beaglebone.dts Wed Aug 20 19:37:05 2014 (r270243)
@@ -133,7 +133,7 @@
i2c at 44e0b000 {
pmic at 24 {
compatible = "ti,am335x-pmic";
- reg = <0x24>;
+ reg = <0x48>;
};
};
};
More information about the svn-src-all
mailing list