svn commit: r257489 - head/sys/arm/conf
Ian Lepore
ian at FreeBSD.org
Fri Nov 1 02:04:06 UTC 2013
Author: ian
Date: Fri Nov 1 02:04:05 2013
New Revision: 257489
URL: http://svnweb.freebsd.org/changeset/base/257489
Log:
Kernel config for Wandboard.
Added:
head/sys/arm/conf/WANDBOARD-COMMON (contents, props changed)
head/sys/arm/conf/WANDBOARD-DUAL (contents, props changed)
head/sys/arm/conf/WANDBOARD-QUAD (contents, props changed)
head/sys/arm/conf/WANDBOARD-SOLO (contents, props changed)
Added: head/sys/arm/conf/WANDBOARD-COMMON
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/conf/WANDBOARD-COMMON Fri Nov 1 02:04:05 2013 (r257489)
@@ -0,0 +1,155 @@
+# Kernel configuration for Wandboard
+#
+# For more information on this file, please read the config(5) manual page,
+# and/or the handbook section on Kernel Configuration Files:
+#
+# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
+# in NOTES.
+#
+# $FreeBSD$
+
+include "../freescale/imx/std.imx6"
+
+options HZ=250 # Scheduling quantum is 4 milliseconds.
+options SCHED_4BSD # 4BSD scheduler
+options PREEMPTION # Enable kernel thread preemption
+options INET # InterNETworking
+options INET6 # IPv6 communications protocols
+#options SCTP # Stream Control Transmission Protocol
+options FFS # Berkeley Fast Filesystem
+options SOFTUPDATES # Enable FFS soft updates support
+options UFS_ACL # Support for access control lists
+options UFS_DIRHASH # Improve performance on big directories
+options UFS_GJOURNAL # Enable gjournal-based UFS journaling
+#options MD_ROOT # MD is a potential root device
+options NFSCL # New Network Filesystem Client
+#options NFSD # New Network Filesystem Server
+options NFSLOCKD # Network Lock Manager
+options NFS_ROOT # NFS usable as /, requires NFSCL
+options MSDOSFS # MSDOS Filesystem
+options CD9660 # ISO 9660 Filesystem
+#options PROCFS # Process filesystem (requires PSEUDOFS)
+options PSEUDOFS # Pseudo-filesystem framework
+options TMPFS # TMP Memory Filesystem
+options GEOM_PART_GPT # GUID Partition Tables.
+options GEOM_LABEL # Provides labelization
+options KTRACE # ktrace(1) support
+options SYSVSHM # SYSV-style shared memory
+options SYSVMSG # SYSV-style message queues
+options SYSVSEM # SYSV-style semaphores
+options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
+options INCLUDE_CONFIG_FILE # Include this file in kernel
+
+# Debugging support. Always need this:
+options KDB # Enable kernel debugger support.
+# For minimum debugger support use KDB_TRACE, for interactive use DDB.
+#options KDB_TRACE # Print a stack trace for a panic.
+options DDB # Support DDB.
+# For full debugger support use this instead:
+#options GDB # Support remote GDB.
+# Other debugging options...
+makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
+options ALT_BREAK_TO_DEBUGGER # Use <CR><tilde><ctrl-b> to enter debugger.
+#options DEBUG
+#options DEADLKRES # Enable the deadlock resolver
+#options INVARIANTS # Enable calls of extra sanity checking
+#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
+#options WITNESS # Enable checks to detect deadlocks and cycles
+
+# Note that 'bpf' is required for DHCP.
+device bpf # Berkeley packet filter
+
+# Pseudo devices.
+device loop # Network loopback
+device random # Entropy device
+device vlan # 802.1Q VLAN support
+device tun # Packet tunnel.
+device md # Memory "disks"
+#device gif # IPv6 and IPv4 tunneling
+#device faith # IPv6-to-IPv4 relaying (translation)
+#device firmware # firmware assist module
+device ether # Ethernet support
+device miibus # Required for ethernet
+
+# Serial (COM) ports
+device uart # Multi-uart driver
+
+#device iomux # IO Multiplexor
+
+# SCSI peripherals
+device scbus # SCSI bus (required for SCSI)
+device da # Direct Access (disks)
+device cd # CD
+device pass # Passthrough device (direct SCSI access)
+
+# USB support
+#options USB_DEBUG # enable debug msgs
+options USB_HOST_ALIGN=32 # Required for ARM, set to cache line size.
+device ehci # OHCI USB interface
+device usb # USB Bus (required)
+device umass # Disks/Mass storage - Requires scbus and da
+device uhid # "Human Interface Devices"
+device u3g # USB modems
+
+# USB Ethernet, requires miibus
+#device aue # ADMtek USB Ethernet
+#device axe # ASIX Electronics USB Ethernet
+#device cdce # Generic USB over Ethernet
+#device cue # CATC USB Ethernet
+#device kue # Kawasaki LSI USB Ethernet
+#device rue # RealTek RTL8150 USB Ethernet
+#device udav # Davicom DM9601E USB
+
+# USB Wireless
+#device rum # Ralink Technology RT2501USB wireless NICs
+
+# Watchdog timer.
+# WARNING: can't be disabled!!!
+#device imxwdt # Watchdog
+
+# Wireless NIC cards
+#device wlan # 802.11 support
+#device wlan_wep # 802.11 WEP support
+#device wlan_ccmp # 802.11 CCMP support
+#device wlan_tkip # 802.11 TKIP support
+#device wlan_amrr # AMRR transmit rate control algorithm
+
+# NOTE: serial console will be disabled if syscons enabled
+# Uncomment following lines for framebuffer/syscons support
+# Wandboard has no video console support yet.
+#device sc
+#device kbdmux
+#options SC_DFLT_FONT # compile font in
+#makeoptions SC_DFLT_FONT=cp437
+#device ukbd # Allow keyboard like HIDs to control console
+#device ums
+
+# required for netbooting
+#options BOOTP
+#options BOOTP_COMPAT
+#options BOOTP_NFSROOT
+#options BOOTP_NFSV3
+#options BOOTP_WIRED_TO=ffec0
+
+# U-Boot stuff lives on slice 1, FreeBSD on slice 2.
+options ROOTDEVNAME=\"ufs:mmcsd0s2a\"
+
+#device fsliic # Freescale i2c/iic (not ready yet)
+#device iic # iic protocol
+#device iicbus # iic bus
+
+device sdhci # SD controller
+device mmc # SD/MMC protocol
+device mmcsd # SDCard disk device
+
+device ffec # Freescale Fast Ethernet Controller
+
Added: head/sys/arm/conf/WANDBOARD-DUAL
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/conf/WANDBOARD-DUAL Fri Nov 1 02:04:05 2013 (r257489)
@@ -0,0 +1,27 @@
+# Kernel configuration for Wandboard-Dual
+#
+# For more information on this file, please read the config(5) manual page,
+# and/or the handbook section on Kernel Configuration Files:
+#
+# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
+# in NOTES.
+#
+# $FreeBSD$
+
+include WANDBOARD-COMMON
+ident WANDBOARD-DUAL
+
+# Flattened Device Tree
+options FDT
+options FDT_DTB_STATIC
+makeoptions FDT_DTS_FILE=wandboard-dual.dts
+
Added: head/sys/arm/conf/WANDBOARD-QUAD
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/conf/WANDBOARD-QUAD Fri Nov 1 02:04:05 2013 (r257489)
@@ -0,0 +1,27 @@
+# Kernel configuration for Wandboard-Quad
+#
+# For more information on this file, please read the config(5) manual page,
+# and/or the handbook section on Kernel Configuration Files:
+#
+# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
+# in NOTES.
+#
+# $FreeBSD$
+
+include WANDBOARD-COMMON
+ident WANDBOARD-QUAD
+
+# Flattened Device Tree
+options FDT
+options FDT_DTB_STATIC
+makeoptions FDT_DTS_FILE=wandboard-quad.dts
+
Added: head/sys/arm/conf/WANDBOARD-SOLO
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/conf/WANDBOARD-SOLO Fri Nov 1 02:04:05 2013 (r257489)
@@ -0,0 +1,27 @@
+# Kernel configuration for Wandboard-Solo
+#
+# For more information on this file, please read the config(5) manual page,
+# and/or the handbook section on Kernel Configuration Files:
+#
+# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
+# in NOTES.
+#
+# $FreeBSD$
+
+include WANDBOARD-COMMON
+ident WANDBOARD-SOLO
+
+# Flattened Device Tree
+options FDT
+options FDT_DTB_STATIC
+makeoptions FDT_DTS_FILE=wandboard-solo.dts
+
More information about the svn-src-all
mailing list