svn commit: r253708 - head/sys/dev/ipmi
Sean Bruno
sbruno at FreeBSD.org
Sat Jul 27 16:32:35 UTC 2013
Author: sbruno
Date: Sat Jul 27 16:32:34 2013
New Revision: 253708
URL: http://svnweb.freebsd.org/changeset/base/253708
Log:
At some point after stable/7 the ACPI and ISA interfaces to the IPMI controller
no longer have the parent in the device tree. This causes the identify
function in ipmi_isa.c to attempt to probe and poke at the ISA IPMI interface
Move the check for ipmi_attached out of the ipmi_isa_attach function and into
the ipmi_isa_identify function. Remove the check of the device tree for
ipmi devices attached.
This probing appears to make Broadcom management firmware on Dell machines
crash and emit NMI EISA warnings at various times requiring power cycles
of the machines to restore.
Bump MAX_TIMEOUT to 6 seconds as a hack for super slow IPMI interfaces that
need longer to respond to our intial probes on startup.
Tested on Dell R410, R510, R815, HP DL160G6
This is MFC candidate for 9.2R
Reviewed by: peter
MFC after: 2 weeks
Sponsored by: Yahoo! Inc.
Modified:
head/sys/dev/ipmi/ipmi_isa.c
head/sys/dev/ipmi/ipmivars.h
Modified: head/sys/dev/ipmi/ipmi_isa.c
==============================================================================
--- head/sys/dev/ipmi/ipmi_isa.c Sat Jul 27 15:28:31 2013 (r253707)
+++ head/sys/dev/ipmi/ipmi_isa.c Sat Jul 27 16:32:34 2013 (r253708)
@@ -56,8 +56,15 @@ ipmi_isa_identify(driver_t *driver, devi
struct ipmi_get_info info;
uint32_t devid;
- if (ipmi_smbios_identify(&info) && info.iface_type != SSIF_MODE &&
- device_find_child(parent, "ipmi", -1) == NULL) {
+ /*
+ * Give other drivers precedence. Unfortunately, this doesn't
+ * work if we have an SMBIOS table that duplicates a PCI device
+ * that's later on the bus than the PCI-ISA bridge.
+ */
+ if (ipmi_attached)
+ return;
+
+ if (ipmi_smbios_identify(&info) && info.iface_type != SSIF_MODE) {
/*
* XXX: Hack alert. On some broken systems, the IPMI
* interface is described via SMBIOS, but the actual
@@ -175,14 +182,6 @@ ipmi_isa_attach(device_t dev)
!ipmi_hint_identify(dev, &info))
return (ENXIO);
- /*
- * Give other drivers precedence. Unfortunately, this doesn't
- * work if we have an SMBIOS table that duplicates a PCI device
- * that's later on the bus than the PCI-ISA bridge.
- */
- if (ipmi_attached)
- return (EBUSY);
-
switch (info.iface_type) {
case KCS_MODE:
count = 2;
Modified: head/sys/dev/ipmi/ipmivars.h
==============================================================================
--- head/sys/dev/ipmi/ipmivars.h Sat Jul 27 15:28:31 2013 (r253707)
+++ head/sys/dev/ipmi/ipmivars.h Sat Jul 27 16:32:34 2013 (r253708)
@@ -219,7 +219,7 @@ struct ipmi_ipmb {
((sc)->ipmi_io_res[1] != NULL ? OUTB_MULTIPLE(sc, x, value) : \
OUTB_SINGLE(sc, x, value))
-#define MAX_TIMEOUT 3 * hz
+#define MAX_TIMEOUT 6 * hz
int ipmi_attach(device_t);
int ipmi_detach(device_t);
More information about the svn-src-all
mailing list