svn commit: r253333 - in head/usr.sbin/bsdconfig/share: media packages
Devin Teske
dteske at FreeBSD.org
Sun Jul 14 03:08:55 UTC 2013
Author: dteske
Date: Sun Jul 14 03:08:52 2013
New Revision: 253333
URL: http://svnweb.freebsd.org/changeset/base/253333
Log:
Re-implement $probe_only aspect of f_media_get_TYPE() (where TYPE is cdrom,
nfs, ftp, http, httpproxy, etc.) and f_device_get() (abstract method for
calling aforementioned f_media_get_TYPE()).
Previously, if $probe_only was present and non-NULL, the TYPE functions
would check for $file and exit with an appropriate error status (success if
the file exists and readable, failure otherwise).
While this has been retained, a pair of globals has been introduced:
$PROBE_EXIST and $PROBE_SIZE (see `/usr/share/bsdconfig/media/common.subr')
The $PROBE_EXIST global can be used where you need the functionality of
simply testing for existence (previously the _only_ functionality).
Meanwhile, the new $PROBE_SIZE global can be used to cause the TYPE function
to print the size of the file (in bytes) on standard-out (or -1) if not
found or an error occurs. NOTE: If an error occurs, it is logged with the
dprintf function, which is visible with `-d' flag or debug=1.
In many cases, where you need to get the size of a file _and_ check for its
existence, you can use the return status of a $PROBE_SIZE call.
Modified:
head/usr.sbin/bsdconfig/share/media/cdrom.subr
head/usr.sbin/bsdconfig/share/media/common.subr
head/usr.sbin/bsdconfig/share/media/directory.subr
head/usr.sbin/bsdconfig/share/media/dos.subr
head/usr.sbin/bsdconfig/share/media/floppy.subr
head/usr.sbin/bsdconfig/share/media/ftp.subr
head/usr.sbin/bsdconfig/share/media/http.subr
head/usr.sbin/bsdconfig/share/media/httpproxy.subr
head/usr.sbin/bsdconfig/share/media/nfs.subr
head/usr.sbin/bsdconfig/share/media/ufs.subr
head/usr.sbin/bsdconfig/share/media/usb.subr
head/usr.sbin/bsdconfig/share/packages/packages.subr
Modified: head/usr.sbin/bsdconfig/share/media/cdrom.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/cdrom.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/cdrom.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -144,19 +144,21 @@ f_media_init_cdrom()
return $SUCCESS
}
-# f_media_get_cdrom $device $file [$probe_only]
+# f_media_get_cdrom $device $file [$probe_type]
#
# Returns data from $file on a mounted CDROM device. Similar to cat(1). If
-# $probe_only is present and non-NULL, returns success if $file exists.
+# $probe_type is present and non-NULL, returns success if $file exists. If
+# $probe_type is equal to $PROBE_SIZE, prints the size of $file in bytes to
+# standard-out.
#
f_media_get_cdrom()
{
- local dev="$1" file="$2" probe_only="$3"
+ local dev="$1" file="$2" probe_type="$3"
- f_dprintf "f_media_get_cdrom: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_cdrom: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
- f_media_generic_get "$MOUNTPOINT" "$file" "$probe_only"
+ f_media_generic_get "$MOUNTPOINT" "$file" "$probe_type"
}
# f_media_shutdown_cdrom $device
Modified: head/usr.sbin/bsdconfig/share/media/common.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/common.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/common.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -42,6 +42,13 @@ f_include $BSDCFG_SHARE/struct.subr
#
MOUNTPOINT=/dist
+#
+# Media probe values to use for `f_media_get_TYPE media $file $PROBE' or
+# `f_device_get media $file $PROBE' (where $PROBE is one of the below values).
+#
+PROBE_EXIST=1
+PROBE_SIZE=2
+
############################################################ FUNCTIONS
# f_media_open
@@ -83,18 +90,20 @@ f_media_verify()
f_struct device_media || f_media_get_type
}
-# f_media_generic_get $base $file [$probe_only]
+# f_media_generic_get $base $file [$probe_type]
#
# A generic open which follows a well-known "path" of places to look. If
-# $probe_only is present and non-NULL, returns success if $file exists.
+# $probe_type is present and non-NULL, returns success if $file exists. If
+# $probe_type is equal to $PROBE_SIZE, prints the size of $file in bytes to
+# standard-out.
#
f_media_generic_get()
{
- local base="$1" file="$2" probe_only="$3"
+ local base="$1" file="$2" probe_type="$3"
local fname=f_media_generic_get
- f_dprintf "%s: base=[%s] files=[%s] probe_only=%s" \
- $fname "$base" "$file" "$probe_only"
+ f_dprintf "%s: base=[%s] files=[%s] probe_type=%s" \
+ $fname "$base" "$file" "$probe_type"
local rel path
f_getvar $VAR_RELNAME rel
@@ -106,7 +115,17 @@ f_media_generic_get()
; do
if [ -f "$path" -a -r "$path" ]; then
f_dprintf "%s: file exists path=[%s]" $fname "$path"
- [ "$probe_only" ] && return $SUCCESS
+ if [ "$probe_type" = "$PROBE_SIZE" ]; then
+ local size
+ if ! size=$( stat -f %z "$path" 2>&1 ); then
+ f_dprintf "stat: %s" "$size"
+ echo "-1"
+ else
+ f_isinteger "$size" || size=-1
+ echo $size
+ fi
+ fi
+ [ "$probe_type" ] && return $SUCCESS
cat "$path"
return
fi
@@ -115,8 +134,19 @@ f_media_generic_get()
path="$base/releases/$rel/$file" # Final path to try
if [ -f "$path" -a -r "$path" ]; then
f_dprintf "%s: file exists path=[%s]" $fname "$path"
- [ "$probe_only" ] && return $SUCCESS
- elif [ "$probe_only" ]; then
+ if [ "$probe_type" = "$PROBE_SIZE" ]; then
+ local size
+ if ! size=$( stat -f %z "$path" 2>&1 ); then
+ f_dprintf "stat: %s" "$size"
+ echo "-1"
+ else
+ f_isinteger "$size" || size=-1
+ echo $size
+ fi
+ fi
+ [ "$probe_type" ] && return $SUCCESS
+ elif [ "$probe_type" ]; then
+ [ "$probe_type" = "$PROBE_SIZE" ] && echo "-1"
return $FAILURE
fi
cat "$base/releases/$rel/$file" # Final path to try
Modified: head/usr.sbin/bsdconfig/share/media/directory.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/directory.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/directory.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -115,21 +115,22 @@ f_media_init_directory()
return $SUCCESS
}
-# f_media_get_directory $device $file [$probe_only]
+# f_media_get_directory $device $file [$probe_type]
#
# Returns data from $file in the existing/current filesystem. Similar to
-# cat(1). If $probe_only is present and non-NULL, returns success if $file
-# exists.
+# cat(1). If $probe_type is present and non-NULL, returns success if $file
+# exists. If $probe_type is equal to $PROBE_SIZE, prints the size of $file in
+# bytes to standard-out.
#
f_media_get_directory()
{
- local dev="$1" file="$2" probe_only="$3" path
+ local dev="$1" file="$2" probe_type="$3" path
- f_dprintf "f_media_get_directory: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_directory: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
device_$dev get private path
- f_media_generic_get "$path" "$file" "$probe_only"
+ f_media_generic_get "$path" "$file" "$probe_type"
}
# f_media_shutdown_directory $device
Modified: head/usr.sbin/bsdconfig/share/media/dos.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/dos.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/dos.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -122,19 +122,21 @@ f_media_init_dos()
return $SUCCESS
}
-# f_media_get_dos $device $file [$probe_only]
+# f_media_get_dos $device $file [$probe_type]
#
# Returns data from $file on a mounted DOS partition device. Similar to cat(1).
-# If $probe_only is present and non-NULL, returns success if $file exists.
+# If $probe_type is present and non-NULL, returns success if $file exists. If
+# $probe_type is equal to $PROBE_SIZE, prints the size of $file in bytes to
+# standard-out.
#
f_media_get_dos()
{
- local dev="$1" file="$2" probe_only="$3"
+ local dev="$1" file="$2" probe_type="$3"
- f_dprintf "f_media_get_dos: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_dos: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
- f_media_generic_get "$MOUNTPOINT" "$file" "$probe_only"
+ f_media_generic_get "$MOUNTPOINT" "$file" "$probe_type"
}
# f_media_shutdown_dos $device
Modified: head/usr.sbin/bsdconfig/share/media/floppy.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/floppy.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/floppy.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -144,17 +144,19 @@ f_media_init_floppy()
return $SUCCESS
}
-# f_media_get_floppy $device $file [$probe_only]
+# f_media_get_floppy $device $file [$probe_type]
#
# Returns data from $file on a mounted Floppy disk device. Similar to cat(1).
-# If $probe_only is present and non-null, limits retries to zero.
+# If $probe_type is present and non-NULL, limits retries to zero and returns
+# success if $file exists. If $probe_type is equal to $PROBE_SIZE, prints the
+# size of $file in bytes to standard-out.
#
f_media_get_floppy()
{
- local dev="$1" file="$2" probe_only="$3"
+ local dev="$1" file="$2" probe_type="$3"
- f_dprintf "f_media_get_floppy: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_floppy: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
#
# floppies don't use f_media_generic_get() because it's too expensive
@@ -166,11 +168,13 @@ f_media_get_floppy()
local fp="${mp:=$MOUNTPOINT}/$file"
if ! [ -f "$fp" -a -r "$fp" ]; then
local nretries=4
- [ "$probe_only" ] && return $FAILURE
+ [ "$probe_type" = "$PROBE_SIZE" ] && echo "-1"
+ [ "$probe_type" ] && return $FAILURE
while ! [ -f "$fp" -a -r "$fp" ]; do
if [ $nretries -eq 0 ]; then
f_show_msg "$msg_failed_to_get_floppy_file" \
"$fp"
+ [ "$probe_type" = "$PROBE_SIZE" ] && echo "-1"
return $FAILURE
fi
FLOPPY_DISTWANTED="$fp"
@@ -178,9 +182,17 @@ f_media_get_floppy()
f_media_init_floppy "$dev" || return $FAILURE
nretries=$(( $nretries - 1 ))
done
- elif [ "$probe_only" ]; then
- return $SUCCESS
fi
+ #
+ # If we reach here, $file exists
+ #
+ if [ "$probe_type" = "$PROBE_SIZE" ]; then
+ local size
+ size=$( stat -f %z "$fp" 2>&1 ) || f_dprintf "stat: %s" "$size"
+ f_isinteger "$size" || size=-1
+ echo "$size"
+ fi
+ [ "$probe_type" ] && return $SUCCESS
cat "$fp"
}
Modified: head/usr.sbin/bsdconfig/share/media/ftp.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/ftp.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/ftp.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -787,12 +787,13 @@ f_media_init_ftp()
return $FAILURE
}
-# f_media_get_ftp $device $file [$probe_only]
+# f_media_get_ftp $device $file [$probe_type]
#
# Returns data from $file on an FTP server using ftp(1). Please note that
# $device is unused but must be present (even if null). Information is instead
-# gathered from the environment. If $probe_only is present and non-NULL,
-# returns success if $file exists.
+# gathered from the environment. If $probe_type is present and non-NULL,
+# returns success if $file exists. If $probe_type is equal to $PROBE_SIZE,
+# prints the size of $file in bytes to standard-out.
#
# Variables from variable.subr used to configure the connection are as follows
# (all of which are configured by f_media_set_ftp above):
@@ -826,10 +827,10 @@ f_media_init_ftp()
#
f_media_get_ftp()
{
- local dev="$1" file="$2" probe_only="$3" hosts=
+ local dev="$1" file="$2" probe_type="$3" hosts=
- f_dprintf "f_media_get_ftp: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_ftp: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
local ftp_host ftp_port
f_getvar $VAR_FTP_HOST ftp_host
@@ -899,14 +900,16 @@ f_media_get_ftp()
f_dprintf "sending ftp request for: %s" "ftp://$host$port/$dir/$file"
- if [ "$probe_only" ]; then
- local url="ftp://$userpass$host$port/$dir/$file"
+ if [ "$probe_type" ]; then
+ local url="ftp://$userpass$host$port/$dir/$file" size
[ "$use_anon" ] && url="ftp://$host$port/$dir/$file"
if ! size=$( fetch -s "$url" 2>&1 ) || ! f_isinteger "$size"
then
f_dprintf "request failed! size response=[%s]" "$size"
+ [ "$probe_type" = "$PROBE_SIZE" ] && echo "-1"
return $FAILURE
fi
+ [ "$probe_type" = "$PROBE_SIZE" ] && echo "$size"
return $SUCCESS
fi
Modified: head/usr.sbin/bsdconfig/share/media/http.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/http.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/http.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -510,13 +510,15 @@ f_media_init_http()
return $http_found
}
-# f_media_get_http $device $file [$probe_only]
+# f_media_get_http $device $file [$probe_type]
#
# Returns data from $file on an HTTP server using nc(1). Please note that
# $device is unused but must be present (even if null). Information is instead
-# gathered from the environment. If $probe_only is both present and non-NULL,
+# gathered from the environment. If $probe_type is both present and non-NULL,
# this function exits after receiving the HTTP header response from the server
# (if the HTTP response code is 200, success is returned; otherwise failure).
+# If $probe_type is equal to $PROBE_SIZE, prints the content-length in bytes
+# from the response (or -1 if not found) to standard-out.
#
# The variables used to configure the connection are as follows (all of which
# are configured by f_media_set_http above):
@@ -542,10 +544,10 @@ f_media_init_http()
#
f_media_get_http()
{
- local dev="$1" file="$2" probe_only="$3" hosts=
+ local dev="$1" file="$2" probe_type="$3" hosts=
- f_dprintf "f_media_get_http: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_http: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
local http_host http_port
f_getvar $VAR_HTTP_HOST http_host
@@ -591,7 +593,7 @@ f_media_get_http()
# this is extremely quick'n dirty
#
- rv=0
+ rv=0 length=-1
while read LINE; do
case "$LINE" in
HTTP*)
@@ -599,6 +601,12 @@ f_media_get_http()
set -- $LINE; rv=$2
f_isinteger "$rv" || rv=0
;;
+ "Content-Length: "*)
+ length="${LINE%
}"
+ length="${length#Content-Length: }"
+ f_dprintf "received content-length: %s" \
+ "$length"
+ ;;
*)
[ "${LINE%
}" ] || break # End of headers
esac
@@ -610,14 +618,17 @@ f_media_get_http()
[ $rv -ge 300 ] && exit 3
[ $rv -eq 200 ] || exit $FAILURE
- if [ ! "$probe_only" ]; then
+ if [ ! "$probe_type" ]; then
cat # output the rest ``as-is''
+ elif [ "$probe_type" = "$PROBE_SIZE" ]; then
+ f_isinteger "$length" || length=-1
+ echo "$length"
fi
exit 200
)
local retval=$?
[ $retval -eq 200 ] && return $SUCCESS
- [ "$probe_only" ] && return $FAILURE
+ [ "$probe_type" ] && return $FAILURE
case "$retval" in
5) f_show_msg "$msg_server_error_when_requesting_url" "$url" ;;
Modified: head/usr.sbin/bsdconfig/share/media/httpproxy.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/httpproxy.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/httpproxy.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -329,14 +329,16 @@ f_media_init_http_proxy()
return $http_found
}
-# f_media_get_http_proxy $device $file [$probe_only]
+# f_media_get_http_proxy $device $file [$probe_type]
#
# Returns data from $file on an FTP server via HTTP proxy using nc(1). Please
# note that $device is unused but must be present (even if null). Information
-# is instead gathered from the environment. If $probe_only is both present and
+# is instead gathered from the environment. If $probe_type is both present and
# non-NULL, this function exits after receiving the HTTP header response from
# the proxy server (if the HTTP response code is 200, success is returned;
-# otherwise failure).
+# otherwise failure). If $probe_type is equal to $PROBE_SIZE, prints the
+# content-length in bytes from the response (or -1 if not found) to standard-
+# out.
#
# The variables used to configure the connection are as follows (all of which
# are configured by f_media_set_http_proxy above):
@@ -358,10 +360,10 @@ f_media_init_http_proxy()
#
f_media_get_http_proxy()
{
- local dev="$1" file="$2" probe_only="$3" hosts=
+ local dev="$1" file="$2" probe_type="$3" hosts=
- f_dprintf "f_media_get_http_proxy: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_http_proxy: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
local proxy_host proxy_port
f_getvar $VAR_HTTP_PROXY_HOST proxy_host
@@ -408,7 +410,7 @@ f_media_get_http_proxy()
# this is extremely quick'n dirty
#
- rv=0
+ rv=0 length=-1
while read LINE; do
case "$LINE" in
HTTP*)
@@ -416,6 +418,12 @@ f_media_get_http_proxy()
set -- $LINE; rv=$2
f_isinteger "$rv" || rv=0
;;
+ "Content-Length: "*)
+ length="${LINE%
}"
+ length="${length#Content-Length: }"
+ f_dprintf "received content-length: %s" \
+ "$length"
+ ;;
*)
[ "${LINE%
}" ] || break # End of headers
esac
@@ -427,14 +435,17 @@ f_media_get_http_proxy()
[ $rv -ge 300 ] && exit 3
[ $rv -eq 200 ] || exit $FAILURE
- if [ ! "$probe_only" ]; then
+ if [ ! "$probe_type" ]; then
cat # output the rest ``as-is''
+ elif [ "$probe_type" = "$PROBE_SIZE" ]; then
+ f_isinteger "$length" || length=-1
+ echo "$length"
fi
exit 200
)
local retval=$?
[ $retval -eq 200 ] && return $SUCCESS
- [ "$probe_only" ] && return $FAILURE
+ [ "$probe_type" ] && return $FAILURE
case "$retval" in
5) f_show_msg "$msg_server_error_when_requesting_url" "$url" ;;
Modified: head/usr.sbin/bsdconfig/share/media/nfs.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/nfs.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/nfs.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -208,19 +208,21 @@ f_media_init_nfs()
return $SUCCESS
}
-# f_media_get_nfs $device $file [$probe_only]
+# f_media_get_nfs $device $file [$probe_type]
#
# Returns data from $file on a mounted NFS device. Similar to cat(1). If
-# $probe_only is present and non-NULL, returns success if $file exists.
+# $probe_type is present and non-NULL, returns success if $file exists. If
+# $probe_type is equal to $PROBE_SIZE, prints the size of $file in bytes to
+# standard-out.
#
f_media_get_nfs()
{
- local dev="$1" file="$2" probe_only="$3"
+ local dev="$1" file="$2" probe_type="$3"
- f_dprintf "f_media_get_nfs: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_nfs: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
- f_media_generic_get "$MOUNTPOINT" "$file" "$probe_only"
+ f_media_generic_get "$MOUNTPOINT" "$file" "$probe_type"
}
# f_media_shutdown_nfs $device
Modified: head/usr.sbin/bsdconfig/share/media/ufs.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/ufs.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/ufs.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -152,19 +152,21 @@ f_media_init_ufs()
return $SUCCESS
}
-# f_media_get_ufs $device $file [$probe_only]
+# f_media_get_ufs $device $file [$probe_type]
#
# Returns data from $file on a mounted UFS partition device. Similar to cat(1).
-# If $probe_only is present and non-NULL, returns success if $file exists.
+# If $probe_type is present and non-NULL, returns success if $file exists. If
+# $probe_type is equal to $PROBE_SIZE, prints the size of $file in bytes to
+# standard-out.
#
f_media_get_ufs()
{
- local dev="$1" file="$2" probe_only="$3"
+ local dev="$1" file="$2" probe_type="$3"
- f_dprintf "f_media_get_ufs: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_ufs: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
- f_media_generic_get "$MOUNTPOINT" "$file" "$probe_only"
+ f_media_generic_get "$MOUNTPOINT" "$file" "$probe_type"
}
# f_media_shutdown_ufs $device
Modified: head/usr.sbin/bsdconfig/share/media/usb.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/media/usb.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/media/usb.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -132,19 +132,21 @@ f_media_init_usb()
return $FAILURE
}
-# f_media_get_usb $device $file [$probe_only]
+# f_media_get_usb $device $file [$probe_type]
#
-# Returns data from $file on a mounted USB disk device. Similar to cat(1).
-# If $probe_only is present and non-NULL, returns success if $file exists.
+# Returns data from $file on a mounted USB disk device. Similar to cat(1). If
+# $probe_type is present and non-NULL, returns success if $file exists. If
+# $probe_type is equal to $PROBE_SIZE, prints the size of $file in bytes to
+# standard-out.
#
f_media_get_usb()
{
- local dev="$1" file="$2" probe_only="$3"
+ local dev="$1" file="$2" probe_type="$3"
- f_dprintf "f_media_get_usb: dev=[%s] file=[%s] probe_only=%s" \
- "$dev" "$file" "$probe_only"
+ f_dprintf "f_media_get_usb: dev=[%s] file=[%s] probe_type=%s" \
+ "$dev" "$file" "$probe_type"
- f_media_generic_get "$MOUNTPOINT" "$file" "$probe_only"
+ f_media_generic_get "$MOUNTPOINT" "$file" "$probe_type"
}
# f_media_shutdown_usb $device
Modified: head/usr.sbin/bsdconfig/share/packages/packages.subr
==============================================================================
--- head/usr.sbin/bsdconfig/share/packages/packages.subr Sat Jul 13 22:39:56 2013 (r253332)
+++ head/usr.sbin/bsdconfig/share/packages/packages.subr Sun Jul 14 03:08:52 2013 (r253333)
@@ -993,9 +993,9 @@ f_package_extract()
esac
# We have a path, call the device strategy routine to get the file
- local pkg_ext probe_only=1 found=
+ local pkg_ext found=
for pkg_ext in "" $PACKAGE_EXTENSIONS; do
- if f_device_get $device "$path$pkg_ext" $probe_only; then
+ if f_device_get $device "$path$pkg_ext" $PROBE_EXIST; then
path="$path$pkg_ext"
f_dprintf "%s: found path=[%s] dev=[%s]" \
$fname "$path" "$device"
More information about the svn-src-all
mailing list