svn commit: r190877 - head/sys/dev/ixgbe
Jack F Vogel
jfv at FreeBSD.org
Fri Apr 10 02:45:01 UTC 2009
Author: jfv
Date: Fri Apr 10 02:45:00 2009
New Revision: 190877
URL: http://svn.freebsd.org/changeset/base/190877
Log:
Add missing file, sorry bout that :)
Added:
head/sys/dev/ixgbe/ixgbe_82599.c (contents, props changed)
Added: head/sys/dev/ixgbe/ixgbe_82599.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/dev/ixgbe/ixgbe_82599.c Fri Apr 10 02:45:00 2009 (r190877)
@@ -0,0 +1,2444 @@
+/******************************************************************************
+
+ Copyright (c) 2001-2009, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+/*$FreeBSD$*/
+
+#include "ixgbe_type.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw);
+s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw);
+s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
+enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw);
+s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw);
+void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw);
+s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_insert_mac_addr_82599(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
+s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan,
+ u32 vind, bool vlan_on);
+s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);
+s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw);
+s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_start_hw_rev_1_82599(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval);
+s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw,
+ u16 *san_mac_offset);
+s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_set_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps);
+
+void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ DEBUGFUNC("ixgbe_init_mac_link_ops_82599");
+
+ if (hw->phy.multispeed_fiber) {
+ /* Set up dual speed SFP+ support */
+ mac->ops.setup_link =
+ &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_link_speed =
+ &ixgbe_setup_mac_link_speed_multispeed_fiber;
+ } else {
+ mac->ops.setup_link =
+ &ixgbe_setup_mac_link_82599;
+ mac->ops.setup_link_speed =
+ &ixgbe_setup_mac_link_speed_82599;
+ }
+}
+
+/**
+ * ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_init_phy_ops_82599");
+
+ /* Identify the PHY or SFP module */
+ ret_val = phy->ops.identify(hw);
+ if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto init_phy_ops_out;
+
+ /* Setup function pointers based on detected SFP module and speeds */
+ ixgbe_init_mac_link_ops_82599(hw);
+ if (hw->phy.sfp_type != ixgbe_sfp_type_unknown)
+ hw->phy.ops.reset = NULL;
+
+ /* If copper media, overwrite with copper function pointers */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
+ mac->ops.setup_link_speed =
+ &ixgbe_setup_copper_link_speed_82599;
+ mac->ops.get_link_capabilities =
+ &ixgbe_get_copper_link_capabilities_generic;
+ }
+
+ /* Set necessary function pointers based on phy type */
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+ phy->ops.get_firmware_version =
+ &ixgbe_get_phy_firmware_version_tnx;
+ break;
+ case ixgbe_phy_aq:
+ phy->ops.get_firmware_version =
+ &ixgbe_get_phy_firmware_version_aq;
+ break;
+ default:
+ break;
+ }
+init_phy_ops_out:
+ return ret_val;
+}
+
+s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+ u16 list_offset, data_offset, data_value;
+
+ DEBUGFUNC("ixgbe_setup_sfp_modules_82599");
+
+ if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
+ ixgbe_init_mac_link_ops_82599(hw);
+
+ hw->phy.ops.reset = NULL;
+
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+ &data_offset);
+ if (ret_val != IXGBE_SUCCESS)
+ goto setup_sfp_out;
+
+ hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ while (data_value != 0xffff) {
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
+ IXGBE_WRITE_FLUSH(hw);
+ hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ }
+ /* Now restart DSP */
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102);
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+setup_sfp_out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count
+ * @hw: pointer to hardware structure
+ *
+ * Read PCIe configuration space, and get the MSI-X vector count from
+ * the capabilities table.
+ **/
+u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
+{
+ u32 msix_count = 64;
+
+ if (hw->mac.msix_vectors_from_pcie) {
+ msix_count = IXGBE_READ_PCIE_WORD(hw,
+ IXGBE_PCIE_MSIX_82599_CAPS);
+ msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+ /* MSI-X count is zero-based in HW, so increment to give
+ * proper value */
+ msix_count++;
+ }
+
+ return msix_count;
+}
+
+/**
+ * ixgbe_init_ops_82599 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for 82599.
+ * Does not touch the hardware.
+ **/
+
+s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ ret_val = ixgbe_init_phy_ops_generic(hw);
+ ret_val = ixgbe_init_ops_generic(hw);
+
+ /* PHY */
+ phy->ops.identify = &ixgbe_identify_phy_82599;
+ phy->ops.init = &ixgbe_init_phy_ops_82599;
+
+ /* MAC */
+ mac->ops.reset_hw = &ixgbe_reset_hw_82599;
+ mac->ops.get_media_type = &ixgbe_get_media_type_82599;
+ mac->ops.get_supported_physical_layer =
+ &ixgbe_get_supported_physical_layer_82599;
+ mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599;
+ mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599;
+ mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599;
+ mac->ops.start_hw = &ixgbe_start_hw_rev_1_82599;
+ mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_82599;
+ mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_82599;
+ mac->ops.get_device_caps = &ixgbe_get_device_caps_82599;
+
+ /* RAR, Multicast, VLAN */
+ mac->ops.set_vmdq = &ixgbe_set_vmdq_82599;
+ mac->ops.clear_vmdq = &ixgbe_clear_vmdq_82599;
+ mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_82599;
+ mac->rar_highwater = 1;
+ mac->ops.set_vfta = &ixgbe_set_vfta_82599;
+ mac->ops.clear_vfta = &ixgbe_clear_vfta_82599;
+ mac->ops.init_uta_tables = &ixgbe_init_uta_tables_82599;
+ mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599;
+
+ /* Link */
+ mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599;
+ mac->ops.check_link = &ixgbe_check_mac_link_82599;
+ ixgbe_init_mac_link_ops_82599(hw);
+
+ mac->mcft_size = 128;
+ mac->vft_size = 128;
+ mac->num_rar_entries = 128;
+ mac->max_tx_queues = 128;
+ mac->max_rx_queues = 128;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_82599 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @negotiation: TRUE when autoneg or autotry is enabled
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *negotiation)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 autoc = 0;
+
+ /*
+ * Determine link capabilities based on the stored value of AUTOC,
+ * which represents EEPROM defaults. If AUTOC value has not
+ * been stored, use the current register values.
+ */
+ if (hw->mac.orig_link_settings_stored)
+ autoc = hw->mac.orig_autoc;
+ else
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = FALSE;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *negotiation = FALSE;
+ break;
+
+ case IXGBE_AUTOC_LMS_1G_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = TRUE;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_SERIAL:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *negotiation = FALSE;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_KX_KR:
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = TRUE;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = TRUE;
+ break;
+
+ case IXGBE_AUTOC_LMS_SGMII_1G_100M:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
+ *negotiation = FALSE;
+ break;
+
+ default:
+ status = IXGBE_ERR_LINK_SETUP;
+ goto out;
+ break;
+ }
+
+ if (hw->phy.multispeed_fiber) {
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = TRUE;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_get_media_type_82599 - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ /* Detect if there is a copper PHY attached. */
+ if (hw->phy.type == ixgbe_phy_cu_unknown ||
+ hw->phy.type == ixgbe_phy_tn ||
+ hw->phy.type == ixgbe_phy_aq) {
+ media_type = ixgbe_media_type_copper;
+ goto out;
+ }
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599_KX4:
+ /* Default device ID is mezzanine card KX/KX4 */
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_82599_SFP:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_82599_CX4:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+out:
+ return media_type;
+}
+
+/**
+ * ixgbe_setup_mac_link_82599 - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link. Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw)
+{
+ u32 autoc_reg;
+ u32 links_reg;
+ u32 i;
+ s32 status = IXGBE_SUCCESS;
+
+ /* Restart link */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (hw->phy.autoneg_wait_to_complete) {
+ if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN
+ || (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ links_reg = 0; /* Just in case Autoneg time = 0 */
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msec_delay(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ DEBUGOUT("Autoneg did not complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msec_delay(50);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_multispeed_fiber - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link for multi-speed fiber at 1G speed, if link
+ * fails at 10G.
+ * Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_82599_AUTONEG;
+ DEBUGFUNC("ixgbe_setup_mac_link_multispeed_fiber");
+
+ status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw,
+ link_speed, TRUE, true);
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_speed_multispeed_fiber - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: TRUE if autonegotiation enabled
+ * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = IXGBE_SUCCESS;
+ ixgbe_link_speed link_speed;
+ ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+ u32 speedcnt = 0;
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ bool link_up = FALSE;
+ bool negotiation;
+
+ /* Mask off requested but non-supported speeds */
+ status = ixgbe_get_link_capabilities(hw, &link_speed, &negotiation);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ speed &= link_speed;
+
+ /*
+ * Try each speed one by one, highest priority first. We do this in
+ * software because 10gb fiber doesn't support speed autonegotiation.
+ */
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ speedcnt++;
+ highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /* If we already have link at this speed, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+ goto out;
+
+ /* Set hardware SDP's */
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+
+ /* Allow module to change analog characteristics (1G->10G) */
+ msec_delay(40);
+
+ status = ixgbe_setup_mac_link_speed_82599(
+ hw, IXGBE_LINK_SPEED_10GB_FULL, autoneg,
+ autoneg_wait_to_complete);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ msec_delay(100);
+
+ /* If we have link, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if (link_up)
+ goto out;
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ speedcnt++;
+ if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
+ highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* If we already have link at this speed, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+ goto out;
+
+ /* Set hardware SDP's */
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+
+ /* Allow module to change analog characteristics (10G->1G) */
+ msec_delay(40);
+
+ status = ixgbe_setup_mac_link_speed_82599(
+ hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg,
+ autoneg_wait_to_complete);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ msec_delay(100);
+
+ /* If we have link, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if (link_up)
+ goto out;
+ }
+
+ /*
+ * We didn't get link. Configure back to the highest speed we tried,
+ * (if there was more than one). We call ourselves back with just the
+ * single highest speed that the user requested.
+ */
+ if (speedcnt > 1)
+ status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw,
+ highest_link_speed, autoneg, autoneg_wait_to_complete);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_check_mac_link_82599 - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: TRUE when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ u32 links_reg;
+ u32 i;
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if (links_reg & IXGBE_LINKS_UP) {
+ *link_up = TRUE;
+ break;
+ } else {
+ *link_up = FALSE;
+ }
+ msec_delay(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ }
+ } else {
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = TRUE;
+ else
+ *link_up = FALSE;
+ }
+
+ if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+ IXGBE_LINKS_SPEED_10G_82599)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+ IXGBE_LINKS_SPEED_1G_82599)
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+
+ /* if link is down, zero out the current_mode */
+ if (*link_up == FALSE) {
+ hw->fc.current_mode = ixgbe_fc_none;
+ hw->fc.fc_was_autonegged = FALSE;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_mac_link_speed_82599 - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: TRUE if autonegotiation enabled
+ * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ u32 orig_autoc = 0;
+ u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+ u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+ u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+ u32 links_reg;
+ u32 i;
+ ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+
+ /* Check to see if speed passed in is supported. */
+ status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ speed &= link_capabilities;
+
+ /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+ if (hw->mac.orig_link_settings_stored)
+ orig_autoc = hw->mac.orig_autoc;
+ else
+ orig_autoc = autoc;
+
+
+ if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
+ status = IXGBE_ERR_LINK_SETUP;
+ } else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ /* Set KX4/KX/KR support according to speed requested */
+ autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ autoc |= IXGBE_AUTOC_KX4_SUPP;
+ if (orig_autoc & IXGBE_AUTOC_KR_SUPP)
+ autoc |= IXGBE_AUTOC_KR_SUPP;
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ autoc |= IXGBE_AUTOC_KX_SUPP;
+ } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
+ (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
+ link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
+ /* Switch from 1G SFI to 10G SFI if requested */
+ if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
+ (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
+ autoc &= ~IXGBE_AUTOC_LMS_MASK;
+ autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
+ }
+ } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
+ (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
+ /* Switch from 10G SFI to 1G SFI if requested */
+ if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+ (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
+ autoc &= ~IXGBE_AUTOC_LMS_MASK;
+ if (autoneg)
+ autoc |= IXGBE_AUTOC_LMS_1G_AN;
+ else
+ autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
+ }
+ }
+
+ if (status == IXGBE_SUCCESS) {
+ /* Restart link */
+ autoc |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ links_reg = 0; /*Just in case Autoneg time=0*/
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg =
+ IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msec_delay(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status =
+ IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ DEBUGOUT("Autoneg did not complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msec_delay(50);
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_setup_copper_link_82599 - Setup copper link settings
+ * @hw: pointer to hardware structure
+ *
+ * Restarts the link on PHY and then MAC. Performs autonegotiation if needed.
+ **/
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ /* Restart autonegotiation on PHY */
+ status = hw->phy.ops.setup_link(hw);
+
+ /* Set up MAC */
+ ixgbe_setup_mac_link_82599(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_copper_link_speed_82599 - Set the PHY autoneg advertised field
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: TRUE if autonegotiation enabled
+ * @autoneg_wait_to_complete: TRUE if waiting is needed to complete
+ *
+ * Restarts link on PHY and MAC based on settings passed in.
+ **/
+static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+
+ /* Setup the PHY according to input speed */
+ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+ /* Set up MAC */
+ ixgbe_setup_mac_link_82599(hw);
+
+ return status;
+}
+/**
+ * ixgbe_reset_hw_82599 - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ **/
+s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 ctrl, ctrl_ext;
+ u32 i;
+ u32 autoc;
+ u32 autoc2;
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Identify PHY and related function pointers */
+ status = hw->phy.ops.init(hw);
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+
+
+ /* Setup SFP module if there is one present. */
+ if (hw->phy.sfp_setup_needed) {
+ status = hw->mac.ops.setup_sfp(hw);
+ hw->phy.sfp_setup_needed = FALSE;
+ }
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+
+ /* Reset PHY */
+ if (hw->phy.reset_disable == FALSE && hw->phy.ops.reset != NULL)
+ hw->phy.ops.reset(hw);
+
+ /*
+ * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+ * access and verify no pending requests before reset
+ */
+ status = ixgbe_disable_pcie_master(hw);
+ if (status != IXGBE_SUCCESS) {
+ status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+ DEBUGOUT("PCI-E Master disable polling has failed.\n");
+ }
+
+ /*
+ * Issue global reset to the MAC. This needs to be a SW reset.
+ * If link reset is used, it might reset the MAC when mng is using it
+ */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ usec_delay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST))
+ break;
+ }
+ if (ctrl & IXGBE_CTRL_RST) {
+ status = IXGBE_ERR_RESET_FAILED;
+ DEBUGOUT("Reset polling failed to complete.\n");
+ }
+ /* Clear PF Reset Done bit so PF/VF Mail Ops can work */
+ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+ ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+ msec_delay(50);
+
+
+
+ /*
+ * Store the original AUTOC/AUTOC2 values if they have not been
+ * stored off yet. Otherwise restore the stored original
+ * values since the reset operation sets back to defaults.
+ */
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ if (hw->mac.orig_link_settings_stored == FALSE) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_autoc2 = autoc2;
+ hw->mac.orig_link_settings_stored = TRUE;
+ } else {
+ if (autoc != hw->mac.orig_autoc)
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
+ IXGBE_AUTOC_AN_RESTART));
+
+ if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+ (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+ autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+ autoc2 |= (hw->mac.orig_autoc2 &
+ IXGBE_AUTOC2_UPPER_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+ }
+ }
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /* Store the permanent SAN mac address */
+ hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+ /* Add the SAN MAC address to the RAR only if it's a valid address */
+ if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+ hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+ hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+ /* Reserve the last RAR for the SAN MAC address */
+ hw->mac.num_rar_entries--;
+ }
+
+reset_hw_out:
+ return status;
+}
+
+/**
+ * ixgbe_insert_mac_addr_82599 - Find a RAR for this mac address
+ * @hw: pointer to hardware structure
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq pool to assign
+ *
+ * Puts an ethernet address into a receive address register, or
+ * finds the rar that it is aleady in; adds to the pool list
+ **/
+s32 ixgbe_insert_mac_addr_82599(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
+{
+ static const u32 NO_EMPTY_RAR_FOUND = 0xFFFFFFFF;
+ u32 first_empty_rar = NO_EMPTY_RAR_FOUND;
+ u32 rar;
+ u32 rar_low, rar_high;
+ u32 addr_low, addr_high;
+
+ /* swap bytes for HW little endian */
+ addr_low = addr[0] | (addr[1] << 8)
+ | (addr[2] << 16)
+ | (addr[3] << 24);
+ addr_high = addr[4] | (addr[5] << 8);
+
+ /*
+ * Either find the mac_id in rar or find the first empty space.
+ * rar_highwater points to just after the highest currently used
+ * rar in order to shorten the search. It grows when we add a new
+ * rar to the top.
+ */
+ for (rar = 0; rar < hw->mac.rar_highwater; rar++) {
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+
+ if (((IXGBE_RAH_AV & rar_high) == 0)
+ && first_empty_rar == NO_EMPTY_RAR_FOUND) {
+ first_empty_rar = rar;
+ } else if ((rar_high & 0xFFFF) == addr_high) {
+ rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(rar));
+ if (rar_low == addr_low)
+ break; /* found it already in the rars */
+ }
+ }
+
+ if (rar < hw->mac.rar_highwater) {
+ /* already there so just add to the pool bits */
+ ixgbe_set_vmdq(hw, rar, vmdq);
+ } else if (first_empty_rar != NO_EMPTY_RAR_FOUND) {
+ /* stick it into first empty RAR slot we found */
+ rar = first_empty_rar;
+ ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
+ } else if (rar == hw->mac.rar_highwater) {
+ /* add it to the top of the list and inc the highwater mark */
+ ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
+ hw->mac.rar_highwater++;
+ } else if (rar >= hw->mac.num_rar_entries) {
+ return IXGBE_ERR_INVALID_MAC_ADDR;
+ }
+
+ /*
+ * If we found rar[0], make sure the default pool bit (we use pool 0)
+ * remains cleared to be sure default pool packets will get delivered
+ */
+ if (rar == 0)
+ ixgbe_clear_vmdq(hw, rar, 0);
+
+ return rar;
+}
+
+/**
+ * ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to disassociate
+ * @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
More information about the svn-src-all
mailing list