svn commit: r405233 - in head/mail/postfix-current: . files
Olli Hauer
ohauer at FreeBSD.org
Mon Jan 4 10:31:53 UTC 2016
Author: ohauer
Date: Mon Jan 4 10:31:51 2016
New Revision: 405233
URL: https://svnweb.freebsd.org/changeset/ports/405233
Log:
- rework pkg-install and pkg-message [1]
- install postfix specific mailer.conf.postfix into DATADIR [2]
- make EAI the default, postfix will reject messages if build
w.o. EAI and compatibility_level is set to a value >=1 [3]
- use new notation instead PATCH_DIST_STRIP
- bump PORTREVISION
1) detect if the port is installed without TERM, in this case
do not ask the to make postfix the default mailer and respect
the env POSTFIX_DEFAULT_MTA. This helps tools like salt,
ansible, cfengine and puppet during the first package installation.
2) $DATADIR/mailer.conf.postfix can be used by the tools in 1)
3) Issue noted by Melissa Pilgrim by PM
Short description of the issue:
If compatibility_level is set to a value >= 1, then postfix set
smtputf8_enable=yes. For more information see
$ postconf -d | grep compatibility_level
and
http://www.postfix.org/SMTPUTF8_README.html
MFH: 2016Q1
Added:
head/mail/postfix-current/files/mailer.conf.postfix.in (contents, props changed)
Modified:
head/mail/postfix-current/Makefile
head/mail/postfix-current/files/pkg-install.in
head/mail/postfix-current/files/pkg-message.in
head/mail/postfix-current/pkg-plist
Modified: head/mail/postfix-current/Makefile
==============================================================================
--- head/mail/postfix-current/Makefile Mon Jan 4 10:23:33 2016 (r405232)
+++ head/mail/postfix-current/Makefile Mon Jan 4 10:31:51 2016 (r405233)
@@ -3,6 +3,7 @@
PORTNAME= postfix
DISTVERSION= 3.0-20151003
+PORTREVISION= 1
PORTEPOCH= 4
CATEGORIES= mail ipv6
MASTER_SITES= ftp://ftp.porcupine.org/mirrors/postfix-release/ \
@@ -47,7 +48,7 @@ OPTIONS_DEFINE= BDB CDB DOCS EAI INST_BA
OPTIONS_RADIO= RG1 RG2
OPTIONS_RADIO_RG1= DOVECOT DOVECOT2
OPTIONS_RADIO_RG2= SASLKRB5 SASLKMIT
-OPTIONS_DEFAULT= PCRE TLS
+OPTIONS_DEFAULT= PCRE TLS EAI
BDB_USE= BDB=yes
CDB_LIB_DEPENDS= libcdb.so:${PORTSDIR}/databases/tinycdb
@@ -129,7 +130,7 @@ META_DIRECTORY= ${DAEMONDIR}
SUB_LIST+= REQUIRE="${_REQUIRE}" READMEDIR="${READMEDIR}" \
DAEMONDIR="${DAEMONDIR}" META_DIRECTORY="${META_DIRECTORY}"
-SUB_FILES+= pkg-install pkg-message
+SUB_FILES+= pkg-install pkg-message mailer.conf.postfix
POSTFIX_CCARGS+= -DDEF_CONFIG_DIR=\\\"${ETCDIR}\\\" \
-DDEF_DAEMON_DIR=\\\"${DAEMONDIR}\\\" \
@@ -199,8 +200,7 @@ POSTFIX_CCARGS+= -DNO_TLS
.if ${PORT_OPTIONS:MSPF}
BROKEN= At the moment, SPF support is unavailable for ${PORTNAME}-${DISTVERSION}
PATCH_SITES+= LOCAL/mm
-PATCHFILES+= postfix-2.8.0-libspf2-1.2.x-0.patch.gz
-PATCH_DIST_STRIP= -p1
+PATCHFILES+= postfix-2.8.0-libspf2-1.2.x-0.patch.gz:-p1
POSTFIX_CCARGS+= -DHAVE_NS_TYPE -DHAS_SPF -I${LOCALBASE}/include
POSTFIX_AUXLIBS+= -L${LOCALBASE}/lib -lspf2
.endif
@@ -368,6 +368,8 @@ post-stage:
# == do not overwrite existing config
${MV} ${STAGEDIR}${ETCDIR}/main.cf ${STAGEDIR}${ETCDIR}/main.cf.sample
${MV} ${STAGEDIR}${ETCDIR}/master.cf ${STAGEDIR}${ETCDIR}/master.cf.sample
+ ${MKDIR} ${STAGEDIR}${DATADIR}
+ ${INSTALL_DATA} ${WRKDIR}/mailer.conf.postfix ${STAGEDIR}${DATADIR}
# == chop dynamicmaps.cf entries into dedicated .cf files
# for future sub-packages support
Added: head/mail/postfix-current/files/mailer.conf.postfix.in
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/mail/postfix-current/files/mailer.conf.postfix.in Mon Jan 4 10:31:51 2016 (r405233)
@@ -0,0 +1,7 @@
+#
+# Execute the Postfix sendmail program, named %%PREFIX%%/sbin/sendmail
+#
+sendmail %%PREFIX%%/sbin/sendmail
+send-mail %%PREFIX%%/sbin/sendmail
+mailq %%PREFIX%%/sbin/sendmail
+newaliases %%PREFIX%%/sbin/sendmail
Modified: head/mail/postfix-current/files/pkg-install.in
==============================================================================
--- head/mail/postfix-current/files/pkg-install.in Mon Jan 4 10:23:33 2016 (r405232)
+++ head/mail/postfix-current/files/pkg-install.in Mon Jan 4 10:31:51 2016 (r405233)
@@ -7,14 +7,18 @@
# will make the port/package use defaults which make postfix replace
# sendmail as much as possible.
-PREFIX=${PKG_PREFIX:=%%PREFIX%%}
-ETCDIR=${ETCDIR:=%%ETCDIR%%}
-DAEMONDIR=${DAEMONDIR:=%%DAEMONDIR%%}
-META_DIRECTORY=${META_DIRECTORY:=%%META_DIRECTORY%%}
-READMEDIR=${READMEDIR:=%%READMEDIR%%}
+# allowed vars during package installation
BATCH=${BATCH:=no}
POSTFIX_DEFAULT_MTA=${POSTFIX_DEFAULT_MTA:=no}
-MC=/etc/mail/mailer.conf
+
+# fixed vars
+PREFIX="%%PREFIX%%"
+ETCDIR="%%ETCDIR%%"
+DAEMONDIR="%%DAEMONDIR%%"
+META_DIRECTORY="%%META_DIRECTORY%%"
+READMEDIR="%%READMEDIR%%"
+MCP="%%DATADIR%%/mailer.conf.postfix"
+MC="/etc/mail/mailer.conf"
if [ "${POSTFIX_DEFAULT_MTA}" = "no" ]; then
DEFAULT_REPLACE_MAILERCONF=n
@@ -22,12 +26,6 @@ else
DEFAULT_REPLACE_MAILERCONF=y
fi
-if [ -x /usr/sbin/nologin ]; then
- NOLOGIN=/usr/sbin/nologin
-else
- NOLOGIN=/sbin/nologin
-fi
-
ask() {
local question default answer
@@ -57,6 +55,25 @@ yesno() {
done
}
+install_mailer_conf() {
+ echo "Activate Postfix in ${MC}"
+ /bin/mv -f ${MC} ${MC}.old
+ /usr/bin/install -m 644 ${MCP} ${MC}
+}
+
+show_not_activated_msg() {
+ echo
+ echo "==============================================================="
+ echo "Postfix was *not* activated in /etc/mail/mailer.conf! "
+ echo
+ echo "To finish installation run the following commands:"
+ echo
+ echo " mv ${MC} ${MC}.old"
+ echo " install -m 0644 ${MCP} ${MC}"
+ echo "==============================================================="
+ echo
+}
+
if [ "$2" = "POST-INSTALL" ]; then
/bin/sh ${DAEMONDIR}/post-install tempdir=/tmp \
daemon_directory=${DAEMONDIR} \
@@ -73,18 +90,22 @@ if [ "$2" = "POST-INSTALL" -a -z "${PACK
egrep -q "^newaliases.*${PREFIX}/sbin/sendmail" ${MC}
ret=$?
if [ ${ret} -ne 0 ]; then
- if yesno "Would you like to activate Postfix in ${MC}" ${DEFAULT_REPLACE_MAILERCONF}; then
- /bin/mv -f ${MC} ${MC}.old
- echo "#" > ${MC}
- echo -n "# Execute the Postfix sendmail program" >> ${MC}
- echo ", named ${PREFIX}/sbin/sendmail" >> ${MC}
- echo "#" >> ${MC}
- echo "sendmail ${PREFIX}/sbin/sendmail" >> ${MC}
- echo "send-mail ${PREFIX}/sbin/sendmail" >> ${MC}
- echo "mailq ${PREFIX}/sbin/sendmail" >> ${MC}
- echo "newaliases ${PREFIX}/sbin/sendmail" >> ${MC}
+ # Respect POSTFIX_DEFAULT_MTA, do not ask for confirmation!
+ # (This helps tools like salt, ansible or puppet on new installations)
+ if [ "${DEFAULT_REPLACE_MAILERCONF}" = "y" ]; then
+ install_mailer_conf
+ elif [ "${DEFAULT_REPLACE_MAILERCONF}" = "n" -a -t 0 ]; then
+ if yesno "Would you like to activate Postfix in ${MC}" ${DEFAULT_REPLACE_MAILERCONF:="n"}; then
+ install_mailer_conf
+ else
+ show_not_activated_msg
+ fi
+ else
+ show_not_activated_msg
fi
else
+ echo "==============================================================="
echo "Postfix already activated in ${MC}"
+ echo "==============================================================="
fi
fi
Modified: head/mail/postfix-current/files/pkg-message.in
==============================================================================
--- head/mail/postfix-current/files/pkg-message.in Mon Jan 4 10:23:33 2016 (r405232)
+++ head/mail/postfix-current/files/pkg-message.in Mon Jan 4 10:31:51 2016 (r405233)
@@ -1,22 +1,20 @@
-To enable postfix startup script please add postfix_enable="YES" in
-your rc.conf
+To use postfix instead of sendmail:
+ - clear sendmail queue and stop the sendmail daemons
-If you not need sendmail anymore, please add in your rc.conf:
-
-sendmail_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_outbound_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-And you can disable some sendmail specific daily maintenance routines in your
-/etc/periodic.conf file:
-
-daily_clean_hoststat_enable="NO"
-daily_status_mail_rejects_enable="NO"
-daily_status_include_submit_mailq="NO"
-daily_submit_queuerun="NO"
-
-If /etc/periodic.conf does not exist please create it and add those values.
+Run the following commands to enable postfix during startup:
+ - sysrc postfix_enable="YES"
+ - sysrc sendmail_enable="NONE"
+
+If postfix is *not* already activated in /etc/mail/mailer.conf
+ - mv /etc/mail/mailer.conf /etc/mail/mailer.conf.old
+ - install -m 0644 %%DAEMONDIR%%/mailer.conf.postfix /etc/mail/mailer.conf
+
+Disable sendmail(8) specific tasks,
+add the following lines to /etc/periodic.conf(.local):
+ daily_clean_hoststat_enable="NO"
+ daily_status_mail_rejects_enable="NO"
+ daily_status_include_submit_mailq="NO"
+ daily_submit_queuerun="NO"
If you are using SASL, you need to make sure that postfix has access to read
the sasldb file. This is accomplished by adding postfix to group mail and
Modified: head/mail/postfix-current/pkg-plist
==============================================================================
--- head/mail/postfix-current/pkg-plist Mon Jan 4 10:23:33 2016 (r405232)
+++ head/mail/postfix-current/pkg-plist Mon Jan 4 10:31:51 2016 (r405233)
@@ -164,6 +164,7 @@ sbin/postmulti
sbin/postsuper
sbin/posttls-finger
sbin/sendmail
+%%DATADIR%%/mailer.conf.postfix
@dir libexec/postfix/dynamicmaps.cf.d
@dir libexec/postfix/postfix-files.d
@dir %%PFETC%%
More information about the svn-ports-all
mailing list