svn commit: r385126 - in head/comms/linrad: . files

Fri May 1 16:25:52 UTC 2015

Author: db
Date: Fri May  1 16:25:48 2015
New Revision: 385126
URL: https://svnweb.freebsd.org/changeset/ports/385126

Log:
  Fix linrad on latest gcc
  
  I checked linrad upstream, and they still haven't fixed these two bugs.  I am surprised they haven't been reported yet.  Without these fixes, linrad cannot be built with gcc5.
  
  the menu.c patch simply reverses the order of the condition.  One must check the bounds constraint first!  It's a pretty dumb mistake but I've seen this kind before.
  
  The second one fails because -Werror is set.  This took me a while because I couldn't figure out the relationship between ADCHANS and rxchan.  In any case, setting 4 locations per channel did indeed allow the array to be big enough.  (at first I thought the loop was running too high, but I finally determined the array was too small).
  
  These were found on DragonFly that uses gcc5.
  
  This patch has not been tested on FreeBSD but I can't how it could possibly fail.
  
  It would be good if the ham@ maintainer reports the issue upstream.
  
  Updated patch files using make makepatch
  
  PR:			ports/199737
  Submitted by:		marino

Added:
  head/comms/linrad/files/patch-caliq.c   (contents, props changed)
  head/comms/linrad/files/patch-menu.c   (contents, props changed)
Modified:
  head/comms/linrad/Makefile
  head/comms/linrad/files/patch-Makefile.in   (contents, props changed)
  head/comms/linrad/files/patch-buf.c   (contents, props changed)
  head/comms/linrad/files/patch-configure   (contents, props changed)
  head/comms/linrad/files/patch-elektor.c   (contents, props changed)
  head/comms/linrad/files/patch-help.c   (contents, props changed)
  head/comms/linrad/files/patch-libfind1.c   (contents, props changed)
  head/comms/linrad/files/patch-libfind2.c   (contents, props changed)
  head/comms/linrad/files/patch-loadusb.h   (contents, props changed)
  head/comms/linrad/files/patch-lxsys.c   (contents, props changed)
  head/comms/linrad/files/patch-users.c   (contents, props changed)
  head/comms/linrad/files/patch-wse_sdrxx.c   (contents, props changed)
  head/comms/linrad/pkg-plist   (contents, props changed)

Modified: head/comms/linrad/Makefile
==============================================================================

--- head/comms/linrad/Makefile	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/Makefile	Fri May  1 16:25:48 2015	(r385126)
@@ -1,9 +1,8 @@
-# Created by: db
 # $FreeBSD$
 
 PORTNAME=	linrad
 PORTVERSION=	4.02
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	comms hamradio
 MASTER_SITES=	http://www.nitehawk.com/sm5bsz/linuxdsp/archive/\
 		http://g7rau.demon.co.uk/sm5bsz/linuxdsp/archive/\
@@ -33,8 +32,6 @@ LINRAD_DOCFILES=	z_APM.txt z_BUFFERS.txt
 			z_PARALLEL_PORT.txt z_SETTINGS.txt \
 			z_USERS_EXTRA.txt z_USERS_HWARE.txt
 
-OPTIONS_DEFINE=	DOCS
-
 .include <bsd.port.pre.mk>
 .if ${ARCH} == "i386"
 BINFILE=	xlinrad
@@ -66,11 +63,9 @@ do-install:
 # Some day we may want the svga version as well.
 #	${INSTALL_PROGRAM} -m0555 ${WRKSRC}/${PORTNAME} $(STAGEDIR}${PREFIX}/bin/${PORTNAME}.svga
 	${INSTALL_PROGRAM} -m0555 ${WRKSRC}/${BINFILE} ${STAGEDIR}${PREFIX}/bin/x${PORTNAME}
-.if ${PORT_OPTIONS:MDOCS}
 	${MKDIR} ${STAGEDIR}${DOCSDIR}
 .for f in ${LINRAD_DOCFILES}
 	@${INSTALL_DATA}  ${WRKSRC}/$f ${STAGEDIR}${DOCSDIR}/$f
 .endfor
-.endif
 
 .include <bsd.port.post.mk>

Modified: head/comms/linrad/files/patch-Makefile.in
==============================================================================
--- head/comms/linrad/files/patch-Makefile.in	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-Makefile.in	Fri May  1 16:25:48 2015	(r385126)
@@ -1,5 +1,5 @@
---- Makefile.in.orig	2014-11-04 02:25:00.000000000 -0800
-+++ Makefile.in	2014-12-08 03:03:40.000000000 -0800
+--- Makefile.in.orig	2014-11-04 10:25:00 UTC
++++ Makefile.in
 @@ -23,7 +23,7 @@
  #
  # -----------     Compilers     ----------------
@@ -9,7 +9,7 @@
  # Name the output files *.ol instead of *.o
  # so we definitely know it is for Linux.
  # (*.o files can be present by mistake)
-@@ -42,7 +42,7 @@
+@@ -42,7 +42,7 @@ WINNASM64 = C:\mingw\bin\nasm -w-orphan-
  # (*.o files can be present by mistake)
  # Always use the same flags.
  # -Wconversion -Wno-sign-conversion -Wunreachable-code
@@ -18,7 +18,7 @@
  -DSHM_INSTALLED=@LIBXEXT32_OK@ -Wimplicit \
  -DALSA_PRESENT=@ALSA32_OK@  -DIA64=0 \
  @DARWIN@ -DLIBUDEV_PRESENT=@LIBUDEV_32_OK@ -DSERVER=@MAKE_SERVER@ \
-@@ -50,7 +50,7 @@
+@@ -50,7 +50,7 @@ CFL	= -g -O2 -DOSNUM=1 -DMEMREF_T=int @X
  -Wuninitialized -Wparentheses -Wstrict-prototypes -Werror -ffast-math \
  -Wundef -fomit-frame-pointer -c -o
  
@@ -27,7 +27,7 @@
  -DCPU=@CPU@ -DSHM_INSTALLED=@LIBXEXT32_OK@ -Wimplicit \
  -DALSA_PRESENT=@ALSA32_OK@ -DIA64=0 \
  @DARWIN@ -DLIBUDEV_PRESENT=@LIBUDEV_32_OK@ -DSERVER=@MAKE_SERVER@ \
-@@ -58,13 +58,13 @@
+@@ -58,13 +58,13 @@ CFLN	= -g -O2 -DOSNUM=1 -DMEMREF_T=int @
  -Wuninitialized -Wparentheses -Wstrict-prototypes -Werror -ffast-math \
  -Wundef -fomit-frame-pointer -c -o
  
@@ -43,7 +43,7 @@
  -DCPU=@CPU@ -DSHM_INSTALLED=@LIBXEXT64_OK@ -DALSA_PRESENT=@ALSA64_OK@ \
  -DIA64=1 @DARWIN@ -DLIBUDEV_PRESENT=@LIBUDEV_64_OK@ -DSERVER=@MAKE_SERVER@ \
  -Wimplicit -Wreturn-type -Wformat -m64 -Wunused -Wcomment \
-@@ -1040,7 +1040,7 @@
+@@ -1040,7 +1040,7 @@ fcdpp.ol hid.ol pcie9842.ol bladerf.ol m
  @SVGA32_LD@ \
  @SVGAGL32_LD@ \
  @LIBUDEV_32_LD@ \
@@ -52,7 +52,7 @@
  
  	@echo " "
  	@echo "You may want to disable pulseaudio in Ubuntu with this command:"
-@@ -1137,7 +1137,7 @@
+@@ -1137,7 +1137,7 @@ fcdpp.ol hid.ol pcie9842.ol bladerf.ol m
  @X11_32_LD@ \
  @ALSA32_LD@ \
  @LIBUDEV_32_LD@ \
@@ -61,7 +61,7 @@
  
  	@echo " "
  	@echo "You may want to disable pulseaudio in Ubuntu with this command:"
-@@ -1210,7 +1210,7 @@
+@@ -1210,7 +1210,7 @@ fcdpp.ol hid.ol pcie9842.ol bladerf.ol m
  @SVGA32_LD@ \
  @SVGAGL32_LD@ \
  @LIBUDEV_32_LD@ \
@@ -70,7 +70,7 @@
  
  	@echo " "
  	@echo "You may want to disable pulseaudio in Ubuntu with this command:"
-@@ -1527,7 +1527,7 @@
+@@ -1527,7 +1527,7 @@ fcdpp.om hid.om pcie9842.om bladerf.om m
  @SVGA64_LD@ \
  @SVGAGL64_LD@ \
  @LIBUDEV_64_LD@ \
@@ -79,7 +79,7 @@
  
  	@echo " "
  	@echo "You may want to disable pulseaudio in Ubuntu with this command:"
-@@ -1612,7 +1612,7 @@
+@@ -1612,7 +1612,7 @@ elektor.om fcdpp.om hid.om pcie9842.om b
  @ALSA64_LD@ \
  @X11_64_LD@ \
  @LIBUDEV_64_LD@ \
@@ -88,7 +88,7 @@
  
  	@echo " "
  	@echo "You may want to disable pulseaudio in Ubuntu with this command:"
-@@ -1686,7 +1686,7 @@
+@@ -1686,7 +1686,7 @@ elektor.om fcdpp.om hid.om pcie9842.om b
  @SVGA64_LD@ \
  @SVGAGL64_LD@ \
  @LIBUDEV_64_LD@ \

Modified: head/comms/linrad/files/patch-buf.c
==============================================================================
--- head/comms/linrad/files/patch-buf.c	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-buf.c	Fri May  1 16:25:48 2015	(r385126)
@@ -1,6 +1,6 @@
---- buf.c.orig	2014-06-27 18:11:24.000000000 -0700
-+++ buf.c	2014-06-27 18:11:33.000000000 -0700
-@@ -1292,7 +1292,7 @@
+--- buf.c.orig	2014-11-04 10:25:00 UTC
++++ buf.c
+@@ -1328,7 +1328,7 @@ if( (ui.network_flag & NET_RXIN_FFT1) ==
  memset(fft1_char,0,fft1_bytes);
  memset(liminfo,0,2*fft1_size*sizeof(float));
  memset(liminfo_wait,0,fft1_size*sizeof(unsigned char));

Added: head/comms/linrad/files/patch-caliq.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/comms/linrad/files/patch-caliq.c	Fri May  1 16:25:48 2015	(r385126)
@@ -0,0 +1,11 @@
+--- caliq.c.orig	2014-11-04 10:25:00 UTC
++++ caliq.c
+@@ -391,7 +391,7 @@ char s[80];
+ int seg,color;
+ int ia,ib;
+ int i,j,k,m,n,mm,errskip;
+-float z[2*MAX_ADCHAN];
++float z[4*MAX_ADCHAN];
+ float t1,t2,t3;
+ caliq_clear_flag=TRUE;
+ clear_fft1_filtercorr();

Modified: head/comms/linrad/files/patch-configure
==============================================================================
--- head/comms/linrad/files/patch-configure	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-configure	Fri May  1 16:25:48 2015	(r385126)
@@ -1,6 +1,6 @@
---- configure.orig	2014-11-04 02:25:00.000000000 -0800
-+++ configure	2014-12-09 10:52:10.000000000 -0800
-@@ -1832,11 +1832,6 @@
+--- configure.orig	2014-11-04 10:25:00 UTC
++++ configure
+@@ -1832,11 +1832,6 @@ fi
  ELF32=""
  ELF64=""
  if test ${OS} != "Darwin"; then
@@ -12,7 +12,7 @@
    ELF64="-felf64"
    LIBEXT="so"
    S_OS_TYPE="OS_LINUX"
-@@ -1853,7 +1848,9 @@
+@@ -1853,7 +1848,9 @@ else
  fi
  
  # Find out whether we have gcc
@@ -23,7 +23,7 @@
  # Extract the first word of "${CC} ", so it can be a program name with args.
  set dummy ${CC} ; ac_word=$2
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-@@ -4025,6 +4022,9 @@
+@@ -4025,6 +4022,9 @@ ALSA32_OK="0"
  ALSA64_OK="0"
  ALSA32_INSTALLED="0"
  ALSA64_INSTALLED="0"
@@ -33,7 +33,7 @@
  ALSA32_LD="libasound.${LIBEXT}"
  X=`./libfind1 libasound.${LIBEXT}`
  ALSA32_INC=`./libfind2 1 "$X"`
-@@ -4090,6 +4090,7 @@
+@@ -4090,6 +4090,7 @@ if test "$ALSA64_OK" = "1"; then
      ALSA64_LD=""
    fi
  fi

Modified: head/comms/linrad/files/patch-elektor.c
==============================================================================
--- head/comms/linrad/files/patch-elektor.c	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-elektor.c	Fri May  1 16:25:48 2015	(r385126)
@@ -1,6 +1,6 @@
---- elektor.c.orig	2014-12-08 03:00:20.000000000 -0800
-+++ elektor.c	2014-12-08 03:00:29.000000000 -0800
-@@ -1020,7 +1020,7 @@
+--- elektor.c.orig	2014-11-04 10:25:00 UTC
++++ elektor.c
+@@ -1018,7 +1018,7 @@ void update_elektor_rx_frequency()
  
  //fprintf( stderr,"update-freq() cntrfreq=%f, hwfreq=%f\n",fg.passband_center,hwfreq);
    // This routine is called from the screen thread.

Modified: head/comms/linrad/files/patch-help.c
==============================================================================
--- head/comms/linrad/files/patch-help.c	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-help.c	Fri May  1 16:25:48 2015	(r385126)
@@ -1,12 +1,12 @@
---- help.c.orig	2014-03-20 18:05:17.000000000 -0700
-+++ help.c	2014-06-27 21:52:48.000000000 -0700
-@@ -584,7 +584,10 @@
+--- help.c.orig	2014-11-04 10:25:00 UTC
++++ help.c
+@@ -583,7 +583,10 @@ void write_from_msg_file(int *line, int 
  char s[512];
  char chr;
  int i,j,k;
 -msg_file=fopen(msg_filename, "r");
 +char *fn;
-+asprintf(&fn, "%s/%s", "%%DATADIR%%", msg_filename);
++asprintf(&fn, "%s/%s", "/usr/local/share/linrad/", msg_filename);
 +msg_file=fopen(fn, "r");
 +free(fn);
  if(msg_file == NULL)

Modified: head/comms/linrad/files/patch-libfind1.c
==============================================================================
--- head/comms/linrad/files/patch-libfind1.c	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-libfind1.c	Fri May  1 16:25:48 2015	(r385126)
@@ -1,13 +1,11 @@
---- libfind1.c.orig	2014-03-20 18:05:17.000000000 -0700
-+++ libfind1.c	2014-06-27 21:45:49.000000000 -0700
-@@ -38,7 +38,9 @@
-               "/usr/lib64/lib",
+--- libfind1.c.orig	2014-11-04 10:25:00 UTC
++++ libfind1.c
+@@ -39,6 +39,8 @@ char *dirs[]={"/lib/i386-linux-gnu",
                "/usr/lib32",
                "/usr/lib64",
--              "/usr/local/lib",
-+              "%%LOCALBASE%%lib",
-+              "%%LOCALBASE%%lib/portaudio2",
-+              "%%LOCALBASE%%lib32",
+               "/usr/local/lib",
++              "/usr/local/lib/portaudio2",
++              "/usr/local/lib32",
                "/usr/local/lib64",
                "/usr/local32/lib",
                "/usr/lib",

Modified: head/comms/linrad/files/patch-libfind2.c
==============================================================================
--- head/comms/linrad/files/patch-libfind2.c	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-libfind2.c	Fri May  1 16:25:48 2015	(r385126)
@@ -1,6 +1,6 @@
---- libfind2.c.orig	2014-06-27 19:49:15.000000000 -0700
-+++ libfind2.c	2014-06-27 19:50:30.000000000 -0700
-@@ -83,7 +83,7 @@
+--- libfind2.c.orig	2014-11-04 10:25:00 UTC
++++ libfind2.c
+@@ -83,7 +83,7 @@ findlinux:;
             argv[2][i-2] == '1' && 
             argv[2][i-1] == '1')
            {
@@ -9,7 +9,7 @@
            }
          else  
            {
-@@ -140,7 +140,7 @@
+@@ -140,7 +140,7 @@ findlinux:;
             argv[2][i-6] == '1' && 
             argv[2][i-5] == '1')
            {
@@ -18,7 +18,7 @@
            }
          else  
            {
-@@ -211,7 +211,7 @@
+@@ -211,7 +211,7 @@ findmac:;
             argv[2][i-2] == '1' && 
             argv[2][i-1] == '1')
            {
@@ -27,7 +27,7 @@
            }
          else  
            {
-@@ -257,7 +257,7 @@
+@@ -257,7 +257,7 @@ findmac:;
             argv[2][i-2] == '1' && 
             argv[2][i-1] == '1')
            {

Modified: head/comms/linrad/files/patch-loadusb.h
==============================================================================
--- head/comms/linrad/files/patch-loadusb.h	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-loadusb.h	Fri May  1 16:25:48 2015	(r385126)
@@ -1,5 +1,5 @@
---- loadusb.h.orig	2014-12-08 03:09:37.000000000 -0800
-+++ loadusb.h	2014-12-08 03:10:07.000000000 -0800
+--- loadusb.h.orig	2014-11-04 10:25:00 UTC
++++ loadusb.h
 @@ -30,6 +30,7 @@
  
  #if OSNUM == OSNUM_LINUX

Modified: head/comms/linrad/files/patch-lxsys.c
==============================================================================
--- head/comms/linrad/files/patch-lxsys.c	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-lxsys.c	Fri May  1 16:25:48 2015	(r385126)
@@ -1,6 +1,15 @@
---- lxsys.c.orig	2014-12-08 03:10:46.000000000 -0800
-+++ lxsys.c	2014-12-08 03:11:39.000000000 -0800
-@@ -120,9 +120,9 @@
+--- lxsys.c.orig	2014-11-04 10:25:00 UTC
++++ lxsys.c
+@@ -63,7 +63,7 @@ int open_USB2LPT(void);
+ 
+ struct termios old_options;
+ #ifdef BSD
+-char serport_name[]="/dev/ttyd....";
++char serport_name[]="/dev/ttyu....";
+ #else
+ char serport_name[]="/dev/ttyS....?";
+ #endif
+@@ -120,9 +120,9 @@ char *fmmx=" mmx";
  char *fsse=" sse";
  char *fht=" ht";
  char *fprocessor="processor";

Added: head/comms/linrad/files/patch-menu.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/comms/linrad/files/patch-menu.c	Fri May  1 16:25:48 2015	(r385126)
@@ -0,0 +1,18 @@
+--- menu.c.orig	2014-11-04 10:25:00 UTC
++++ menu.c
+@@ -965,11 +965,13 @@ if(parnum == SECOND_FFT_ATT_N)
+   {
+   k[0]=fft2_n-2;
+   }
++// Please check if index is within constaints *BEFORE* using it.
++// This error was caught by GCC5 diagnostics marino at FreeBSD.org
+ if(parnum == SECOND_FFT_VERNR)
+   {
+   i=0;
+-  while( fft2_version[ui.rx_rf_channels-1][i+1] > 0 &&
+-                                      i < MAX_FFT2_VERNR-1)i++;
++  while( i < MAX_FFT2_VERNR-1 && 
++         fft2_version[ui.rx_rf_channels-1][i+1] > 0)i++;
+   if(mmx_present == 0)
+     {
+     while( fft_cntrl[fft2_version[ui.rx_rf_channels-1][i]].mmx != 0)i--;

Modified: head/comms/linrad/files/patch-users.c
==============================================================================
--- head/comms/linrad/files/patch-users.c	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-users.c	Fri May  1 16:25:48 2015	(r385126)
@@ -1,6 +1,6 @@
---- users.c.orig	2014-06-28 18:33:12.000000000 -0700
-+++ users.c	2014-06-28 18:33:19.000000000 -0700
-@@ -130,6 +130,7 @@
+--- users.c.orig	2014-11-04 10:25:00 UTC
++++ users.c
+@@ -130,6 +130,7 @@ void userdefined_q(void)
  // Leaving the port open the whole time could leave it in an
  // undefined state if Linrad crashes.
  //
@@ -8,7 +8,7 @@
  int n;
  int serport_baudrate;
  int serport_stopbits;
-@@ -142,6 +143,7 @@
+@@ -142,6 +143,7 @@ lir_open_serport(SERPORT_NUMBER,        
                   0);                    // RTS mode = 0
  n=lir_write_serport(serport_message,10);
  lir_close_serport();

Modified: head/comms/linrad/files/patch-wse_sdrxx.c
==============================================================================
--- head/comms/linrad/files/patch-wse_sdrxx.c	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/files/patch-wse_sdrxx.c	Fri May  1 16:25:48 2015	(r385126)
@@ -1,6 +1,6 @@
---- wse_sdrxx.c.orig	2014-11-04 02:25:00.000000000 -0800
-+++ wse_sdrxx.c	2014-12-08 03:15:31.000000000 -0800
-@@ -219,9 +219,9 @@
+--- wse_sdrxx.c.orig	2014-11-04 10:25:00 UTC
++++ wse_sdrxx.c
+@@ -219,9 +219,9 @@ if(ui.rx_addev_no == RTL2832_DEVICE_CODE
      m=10000;
      for(i=0; i<no_of_rtl2832_gains; i++)
        {
@@ -12,7 +12,7 @@
          j=i;
          }
        }
-@@ -265,9 +265,9 @@
+@@ -265,9 +265,9 @@ if(ui.rx_addev_no == MIRISDR_DEVICE_CODE
      m=10000;
      for(i=0; i<no_of_mirics_gains; i++)
        {

Modified: head/comms/linrad/pkg-plist
==============================================================================
--- head/comms/linrad/pkg-plist	Fri May  1 16:17:07 2015	(r385125)
+++ head/comms/linrad/pkg-plist	Fri May  1 16:25:48 2015	(r385126)
@@ -2,15 +2,15 @@ bin/linrad
 bin/xlinrad
 %%DATADIR%%/errors.lir
 %%DATADIR%%/help.lir
-%%PORTDOCS%%%%DOCSDIR%%/z_APM.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_BUFFERS.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_CALIBRATE.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_COPYRIGHT.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_GIFINFO.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_MORSE_DECODING.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_MOUSE.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_NETWORK.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_PARALLEL_PORT.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_SETTINGS.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_USERS_EXTRA.txt
-%%PORTDOCS%%%%DOCSDIR%%/z_USERS_HWARE.txt
+%%DOCSDIR%%/z_APM.txt
+%%DOCSDIR%%/z_BUFFERS.txt
+%%DOCSDIR%%/z_CALIBRATE.txt
+%%DOCSDIR%%/z_COPYRIGHT.txt
+%%DOCSDIR%%/z_GIFINFO.txt
+%%DOCSDIR%%/z_MORSE_DECODING.txt
+%%DOCSDIR%%/z_MOUSE.txt
+%%DOCSDIR%%/z_NETWORK.txt
+%%DOCSDIR%%/z_PARALLEL_PORT.txt
+%%DOCSDIR%%/z_SETTINGS.txt
+%%DOCSDIR%%/z_USERS_EXTRA.txt
+%%DOCSDIR%%/z_USERS_HWARE.txt
