svn commit: r44915 - head/en_US.ISO8859-1/books/handbook/bsdinstall
Dru Lavigne
dru at FreeBSD.org
Fri May 23 14:25:49 UTC 2014
Author: dru
Date: Fri May 23 14:25:48 2014
New Revision: 44915
URL: http://svnweb.freebsd.org/changeset/doc/44915
Log:
White space fix only. Translators can ignore.
Sponsored by: iXsystems
Modified:
head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
Modified: head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
==============================================================================
--- head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml Fri May 23 14:06:31 2014 (r44914)
+++ head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml Fri May 23 14:25:48 2014 (r44915)
@@ -1547,7 +1547,7 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<row>
<entry><literal>freebsd-swap</literal></entry>
<entry><literal>4G</literal></entry>
- <entry/>
+ <entry></entry>
<entry><literal>exswap</literal></entry>
</row>
@@ -2144,8 +2144,8 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<sect2 xml:id="bsdinstall-timezone">
<title>Setting the Time Zone</title>
- <para>The next menu asks if the system clock
- uses <acronym>UTC</acronym> or local time. When in doubt, select
+ <para>The next menu asks if the system clock uses
+ <acronym>UTC</acronym> or local time. When in doubt, select
<guibutton>[ No ]</guibutton> to choose the more
commonly-used local time.</para>
@@ -2160,16 +2160,16 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
</mediaobject>
</figure>
- <para>The next series of menus are used to determine the
- correct local time by selecting the geographic region, country,
- and time zone. Setting the time zone allows the system to
+ <para>The next series of menus are used to determine the correct
+ local time by selecting the geographic region, country, and
+ time zone. Setting the time zone allows the system to
automatically correct for regional time changes, such as
- daylight savings time, and
- perform other time zone related functions properly.</para>
+ daylight savings time, and perform other time zone related
+ functions properly.</para>
- <para>The example shown here is for a machine located in the Eastern
- time zone of the United States. The selections will vary
- according to the geographical location.</para>
+ <para>The example shown here is for a machine located in the
+ Eastern time zone of the United States. The selections will
+ vary according to the geographical location.</para>
<figure xml:id="bsdinstall-timezone-region">
<title>Select a Region</title>
@@ -2209,8 +2209,8 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
</mediaobject>
</figure>
- <para>The appropriate time zone is selected using the arrow
- keys and pressing <keycap>Enter</keycap>.</para>
+ <para>The appropriate time zone is selected using the arrow keys
+ and pressing <keycap>Enter</keycap>.</para>
<figure xml:id="bsdinstall-timezone-confirmation">
<title>Confirm Time Zone</title>
@@ -2224,17 +2224,17 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
</figure>
<para>Confirm the abbreviation for the time zone is correct. If
- it is, press <keycap>Enter</keycap> to continue with
- the post-installation configuration.</para>
+ it is, press <keycap>Enter</keycap> to continue with the
+ post-installation configuration.</para>
</sect2>
<sect2 xml:id="bsdinstall-sysconf">
<title>Enabling Services</title>
<para>The next menu is used to configure which system services
- will be started whenever the system boots.
- All of these services are optional. Only start the services
- that are needed for the system to function.</para>
+ will be started whenever the system boots. All of these
+ services are optional. Only start the services that are
+ needed for the system to function.</para>
<figure xml:id="bsdinstall-config-serv">
<title>Selecting Additional Services to Enable</title>
@@ -2253,9 +2253,9 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<itemizedlist>
<listitem>
<para><literal>sshd</literal> - The Secure Shell
- (<acronym>SSH</acronym>) daemon is used to remotely
- access a system over an encrypted connection. Only enable
- this service if the system should be available for remote
+ (<acronym>SSH</acronym>) daemon is used to remotely access
+ a system over an encrypted connection. Only enable this
+ service if the system should be available for remote
logins.</para>
</listitem>
@@ -2284,9 +2284,9 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<title>Enabling Crash Dumps</title>
<para>The next menu is used to configure whether or not crash
- dumps should be enabled. Enabling crash
- dumps can be useful in debugging issues with the system,
- so users are encouraged to enable crash dumps.</para>
+ dumps should be enabled. Enabling crash dumps can be useful
+ in debugging issues with the system, so users are encouraged
+ to enable crash dumps.</para>
<figure xml:id="bsdinstall-config-crashdump">
<title>Enabling Crash Dumps</title>
@@ -2305,11 +2305,11 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<para>The next menu prompts to create at least one user account.
It is recommended to login to the system using a user account
- rather than as <systemitem
- class="username">root</systemitem>. When logged in as
- <systemitem class="username">root</systemitem>, there are
- essentially no limits or protection on what can be done.
- Logging in as a normal user is safer and more secure.</para>
+ rather than as <systemitem class="username">root</systemitem>.
+ When logged in as <systemitem
+ class="username">root</systemitem>, there are essentially no
+ limits or protection on what can be done. Logging in as a
+ normal user is safer and more secure.</para>
<para>Select <guibutton>[ Yes ]</guibutton> to add new
users.</para>
@@ -2325,8 +2325,8 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
</figure>
<para>Follow the prompts and input the requested information for
- the user account. The example shown in <xref
- linkend="bsdinstall-add-user2"/> creates the <systemitem
+ the user account. The example shown in <xref
+ linkend="bsdinstall-add-user2"/> creates the <systemitem
class="username">asample</systemitem> user account.</para>
<figure xml:id="bsdinstall-add-user2">
@@ -2344,16 +2344,17 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<itemizedlist>
<listitem>
<para><literal>Username</literal> - The name the user will
- enter to log in. A common convention is to use the first letter of the
- first name combined with the last name, as long as each
- username is unique for the system. The username is case
- sensitive and should not contain any spaces.</para>
+ enter to log in. A common convention is to use the first
+ letter of the first name combined with the last name, as
+ long as each username is unique for the system. The
+ username is case sensitive and should not contain any
+ spaces.</para>
</listitem>
<listitem>
- <para><literal>Full name</literal> - The user's full
- name. This can contain spaces and is used as a
- description for the user account.</para>
+ <para><literal>Full name</literal> - The user's full name.
+ This can contain spaces and is used as a description for
+ the user account.</para>
</listitem>
<listitem>
@@ -2382,9 +2383,9 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<listitem>
<para><literal>Shell</literal> - Type in one of the listed
- values to set the interactive shell for
- the user. Refer to <xref linkend="shells"/> for more
- information about shells.</para>
+ values to set the interactive shell for the user. Refer
+ to <xref linkend="shells"/> for more information about
+ shells.</para>
</listitem>
<listitem>
@@ -2417,9 +2418,9 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
</listitem>
<listitem>
- <para><literal>Enter password</literal> - The
- password for this user. Characters typed will not show on
- the screen.</para>
+ <para><literal>Enter password</literal> - The password for
+ this user. Characters typed will not show on the
+ screen.</para>
</listitem>
<listitem>
@@ -2429,15 +2430,15 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<listitem>
<para><literal>Lock out the account after
- creation?</literal> - Typically
- <literal>no</literal> so that the user can login.</para>
+ creation?</literal> - Typically <literal>no</literal> so
+ that the user can login.</para>
</listitem>
</itemizedlist>
<para>After entering everything, a summary is shown for review.
- If a mistake was made, enter <literal>no</literal> and try again. If
- everything is correct, enter <literal>yes</literal> to create
- the new user.</para>
+ If a mistake was made, enter <literal>no</literal> and try
+ again. If everything is correct, enter <literal>yes</literal>
+ to create the new user.</para>
<figure xml:id="bsdinstall-add-user3">
<title>Exit User and Group Management</title>
@@ -2548,47 +2549,45 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
</figure>
<para>If further configuration or special setup is needed,
- select <guibutton>[ Live CD ]</guibutton>
- to boot the install media into Live <acronym>CD</acronym>
+ select <guibutton>[ Live CD ]</guibutton> to
+ boot the install media into Live <acronym>CD</acronym>
mode.</para>
<para>If the installation is complete, select
<guibutton>[ Reboot ]</guibutton> to reboot the
computer and start the new &os; system. Do not forget to
- remove the &os; install media
- or the computer may boot from it again.</para>
+ remove the &os; install media or the computer may boot from it
+ again.</para>
- <para>As &os; boots, informational messages are
- displayed.
- After the system finishes booting, a login prompt is
- displayed. At the <prompt>login:</prompt> prompt, enter the
- username added during the installation.
- Avoid logging in as <systemitem
- class="username">root</systemitem>. Refer to <xref
- linkend="users-superuser"/> for instructions on how to
- become the superuser when administrative access is
- needed.</para>
-
- <para>The messages that appeared during boot can be
- reviewed by pressing <keycap>Scroll-Lock</keycap> to turn on
- the scroll-back buffer. The
- <keycap>PgUp</keycap>, <keycap>PgDn</keycap>, and arrow keys
- can be used to scroll back through the messages. When finished, press
- <keycap>Scroll-Lock</keycap> again to unlock the display and
- return to the console. To review these messages once the
- system has been up for some time, type
- <command>less /var/run/dmesg.boot</command> from a command
- prompt. Press <keycap>q</keycap> to return to the command
- line after viewing.</para>
-
- <para>If <application>sshd</application> was enabled in <xref
- linkend="bsdinstall-config-serv"/>, the first boot may be
- a bit slower as the system will generate the <acronym>RSA</acronym> and
- <acronym>DSA</acronym> keys. Subsequent boots will be
- faster. The fingerprints of the keys will be displayed, as seen in
- this example:</para>
+ <para>As &os; boots, informational messages are displayed.
+ After the system finishes booting, a login prompt is
+ displayed. At the <prompt>login:</prompt> prompt, enter the
+ username added during the installation. Avoid logging in as
+ <systemitem class="username">root</systemitem>. Refer to
+ <xref linkend="users-superuser"/> for instructions on how to
+ become the superuser when administrative access is
+ needed.</para>
+
+ <para>The messages that appeared during boot can be reviewed by
+ pressing <keycap>Scroll-Lock</keycap> to turn on the
+ scroll-back buffer. The <keycap>PgUp</keycap>,
+ <keycap>PgDn</keycap>, and arrow keys can be used to scroll
+ back through the messages. When finished, press
+ <keycap>Scroll-Lock</keycap> again to unlock the display and
+ return to the console. To review these messages once the
+ system has been up for some time, type <command>less
+ /var/run/dmesg.boot</command> from a command prompt. Press
+ <keycap>q</keycap> to return to the command line after
+ viewing.</para>
+
+ <para>If <application>sshd</application> was enabled in <xref
+ linkend="bsdinstall-config-serv"/>, the first boot may be
+ a bit slower as the system will generate the
+ <acronym>RSA</acronym> and <acronym>DSA</acronym> keys.
+ Subsequent boots will be faster. The fingerprints of the keys
+ will be displayed, as seen in this example:</para>
- <screen>Generating public/private rsa1 key pair.
+ <screen>Generating public/private rsa1 key pair.
Your identification has been saved in /etc/ssh/ssh_host_key.
Your public key has been saved in /etc/ssh/ssh_host_key.pub.
The key fingerprint is:
@@ -2624,24 +2623,24 @@ The key's randomart image is:
+-----------------+
Starting sshd.</screen>
- <para>Refer to <xref linkend="openssh"/> for more information
- about fingerprints and <acronym>SSH</acronym>.</para>
+ <para>Refer to <xref linkend="openssh"/> for more information
+ about fingerprints and <acronym>SSH</acronym>.</para>
- <para>&os; does not install a graphical environment by default.
- Refer to <xref linkend="x11"/> for more
- information about installing and configuring a graphical
- window manager.</para>
+ <para>&os; does not install a graphical environment by default.
+ Refer to <xref linkend="x11"/> for more information about
+ installing and configuring a graphical window manager.</para>
<para>Proper shutdown of a &os; computer helps protect data and
- hardware from damage. <emphasis>Do not turn off the power before
- the system has been properly shut down!</emphasis> If the user is a
- member of the <systemitem
+ hardware from damage. <emphasis>Do not turn off the power
+ before the system has been properly shut down!</emphasis> If
+ the user is a member of the <systemitem
class="groupname">wheel</systemitem> group, become the
superuser by typing <command>su</command> at the command line
and entering the <systemitem
class="username">root</systemitem> password. Then, type
<command>shutdown -p now</command> and the system will shut
- down cleanly, and if the hardware supports it, turn itself off.</para>
+ down cleanly, and if the hardware supports it, turn itself
+ off.</para>
</sect2>
</sect1>
@@ -2656,90 +2655,88 @@ Starting sshd.</screen>
troubleshooting, such as common problems people have
reported.</para>
- <para>Check the Hardware Notes (<link
- xlink:href="&url.base;/releases/index.html">http://www.freebsd.org/releases/index.html</link>)
- document for the version of &os; to make sure the hardware is
- supported. If the hardware is supported and lock-ups or other
- problems occur, build a custom kernel using the instructions
- in <xref linkend="kernelconfig"/> to add support for devices
- which are not present in the <filename>GENERIC</filename>
- kernel. The default kernel assumes
- that most hardware devices are in their factory default
- configuration in terms of <acronym>IRQ</acronym>s,
- <acronym>I/O</acronym> addresses, and <acronym>DMA</acronym>
- channels. If the hardware has been reconfigured, a custom
- kernel configuration file can tell &os; where to find
- things.</para>
-
- <note>
- <para>Some installation problems can be avoided or alleviated
- by updating the firmware on various hardware components,
- most notably the motherboard. Motherboard firmware is
- usually referred to as the <acronym>BIOS</acronym>. Most
- motherboard and computer manufacturers have a website for
- upgrades and upgrade information.</para>
-
- <para>Manufacturers generally advise against upgrading the
- motherboard <acronym>BIOS</acronym> unless there is a good
- reason for doing so, like a critical update. The upgrade
- process <emphasis>can</emphasis> go wrong, leaving the
- <acronym>BIOS</acronym> incomplete and the computer
- inoperative.</para>
- </note>
-
- <para>If the system hangs while probing hardware during boot,
- or it behaves strangely during install,
- <acronym>ACPI</acronym> may be the culprit. &os; makes extensive use of the system
- <acronym>ACPI</acronym> service on the &arch.i386;, &arch.amd64;, and
- ia64 platforms to aid in system configuration if it is
- detected during boot. Unfortunately, some bugs still
- exist in both the <acronym>ACPI</acronym> driver and
- within system motherboards and <acronym>BIOS</acronym>
- firmware. <acronym>ACPI</acronym> can be disabled by
- setting the <literal>hint.acpi.0.disabled</literal> hint
- in the third stage boot loader:</para>
-
- <screen><userinput>set hint.acpi.0.disabled="1"</userinput></screen>
-
- <para>This is reset each time the system is booted, so it
- is necessary to add
- <literal>hint.acpi.0.disabled="1"</literal> to the file
- <filename>/boot/loader.conf</filename>. More
- information about the boot loader can be found in <xref
- linkend="boot-synopsis"/>.</para>
+ <para>Check the Hardware Notes (<link
+ xlink:href="&url.base;/releases/index.html">http://www.freebsd.org/releases/index.html</link>)
+ document for the version of &os; to make sure the hardware is
+ supported. If the hardware is supported and lock-ups or other
+ problems occur, build a custom kernel using the instructions in
+ <xref linkend="kernelconfig"/> to add support for devices which
+ are not present in the <filename>GENERIC</filename> kernel. The
+ default kernel assumes that most hardware devices are in their
+ factory default configuration in terms of
+ <acronym>IRQ</acronym>s, <acronym>I/O</acronym> addresses, and
+ <acronym>DMA</acronym> channels. If the hardware has been
+ reconfigured, a custom kernel configuration file can tell &os;
+ where to find things.</para>
+
+ <note>
+ <para>Some installation problems can be avoided or alleviated by
+ updating the firmware on various hardware components, most
+ notably the motherboard. Motherboard firmware is usually
+ referred to as the <acronym>BIOS</acronym>. Most motherboard
+ and computer manufacturers have a website for upgrades and
+ upgrade information.</para>
+
+ <para>Manufacturers generally advise against upgrading the
+ motherboard <acronym>BIOS</acronym> unless there is a good
+ reason for doing so, like a critical update. The upgrade
+ process <emphasis>can</emphasis> go wrong, leaving the
+ <acronym>BIOS</acronym> incomplete and the computer
+ inoperative.</para>
+ </note>
+
+ <para>If the system hangs while probing hardware during boot, or
+ it behaves strangely during install, <acronym>ACPI</acronym> may
+ be the culprit. &os; makes extensive use of the system
+ <acronym>ACPI</acronym> service on the &arch.i386;,
+ &arch.amd64;, and ia64 platforms to aid in system configuration
+ if it is detected during boot. Unfortunately, some bugs still
+ exist in both the <acronym>ACPI</acronym> driver and within
+ system motherboards and <acronym>BIOS</acronym> firmware.
+ <acronym>ACPI</acronym> can be disabled by setting the
+ <literal>hint.acpi.0.disabled</literal> hint in the third stage
+ boot loader:</para>
+
+ <screen><userinput>set hint.acpi.0.disabled="1"</userinput></screen>
+
+ <para>This is reset each time the system is booted, so it is
+ necessary to add <literal>hint.acpi.0.disabled="1"</literal> to
+ the file <filename>/boot/loader.conf</filename>. More
+ information about the boot loader can be found in <xref
+ linkend="boot-synopsis"/>.</para>
</sect1>
<sect1 xml:id="using-live-cd">
<title>Using the Live <acronym>CD</acronym></title>
- <para>The welcome menu of <application>sysinstall</application>, shown in <xref
- linkend="bsdinstall-choose-mode"/>, provides a
- <guibutton>[ Live CD ]</guibutton> option.
- This is useful for those who are still wondering whether &os;
- is the right operating system for them and want to test some of
- the features before installing.</para>
-
- <para>The following points should be noted before using the
- <guibutton>[ Live CD ]</guibutton>:</para>
- <itemizedlist>
- <listitem>
- <para>To gain access to the system, authentication is
- required. The username is <systemitem
- class="username">root</systemitem> and the password is
- blank.</para>
- </listitem>
-
- <listitem>
- <para>As the system runs directly from the installation
- media, performance will be significantly
- slower than that of a system installed on a hard
- disk.</para>
- </listitem>
-
- <listitem>
- <para>This option only provides a command
- prompt and not a graphical interface.</para>
- </listitem>
- </itemizedlist>
+ <para>The welcome menu of <application>sysinstall</application>,
+ shown in <xref linkend="bsdinstall-choose-mode"/>, provides a
+ <guibutton>[ Live CD ]</guibutton> option. This
+ is useful for those who are still wondering whether &os; is the
+ right operating system for them and want to test some of the
+ features before installing.</para>
+
+ <para>The following points should be noted before using the
+ <guibutton>[ Live CD ]</guibutton>:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para>To gain access to the system, authentication is
+ required. The username is <systemitem
+ class="username">root</systemitem> and the password is
+ blank.</para>
+ </listitem>
+
+ <listitem>
+ <para>As the system runs directly from the installation media,
+ performance will be significantly slower than that of a
+ system installed on a hard disk.</para>
+ </listitem>
+
+ <listitem>
+ <para>This option only provides a command prompt and not a
+ graphical interface.</para>
+ </listitem>
+ </itemizedlist>
</sect1>
</chapter>
More information about the svn-doc-head
mailing list