svn commit: r39981 - head/en_US.ISO8859-1/books/faq
Eitan Adler
eadler at FreeBSD.org
Sun Nov 11 22:29:02 UTC 2012
Author: eadler
Date: Sun Nov 11 22:29:01 2012
New Revision: 39981
URL: http://svnweb.freebsd.org/changeset/doc/39981
Log:
Reduce redundant markup and word and other minor problems reported by
igor. Limited additional checking was done of the surrounding content.
Approved by: jkois (mentor, before merge conflict resolution)
Modified:
head/en_US.ISO8859-1/books/faq/book.xml
Modified: head/en_US.ISO8859-1/books/faq/book.xml
==============================================================================
--- head/en_US.ISO8859-1/books/faq/book.xml Sun Nov 11 21:42:32 2012 (r39980)
+++ head/en_US.ISO8859-1/books/faq/book.xml Sun Nov 11 22:29:01 2012 (r39981)
@@ -923,7 +923,7 @@
<para>Where the format is
<literal>html-split</literal>, the files are bundled
up using &man.tar.1;. The resulting
- <filename>.tar</filename> file is then compressed
+ <filename>.tar</filename> is then compressed
using the compression schemes detailed in the next
point.</para>
</listitem>
@@ -986,9 +986,9 @@
appropriate documents into place.</para>
<para>For example, the split HTML version of the FAQ,
- compressed using &man.bzip2.1;, can be found in the
+ compressed using &man.bzip2.1;, can be found in
<filename>doc/en_US.ISO8859-1/books/faq/book.html-split.tar.bz2</filename>
- file. To download and uncompress that file you would have
+ To download and uncompress that file you would have
to do this.</para>
<screen>&prompt.root; <userinput>fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/doc/en_US.ISO8859-1/books/faq/book.html-split.tar.bz2</userinput>
@@ -2241,7 +2241,7 @@
drive. See &man.burncd.8; for details.</para>
<para>&os; also supports any SCSI CD-R or CD-RW drives.
- Install and use the <command>cdrecord</command> command
+ Install and use <command>cdrecord</command>
from the ports or packages system, and make sure that you
have the <devicename>pass</devicename> device compiled in
your kernel.</para>
@@ -2766,8 +2766,8 @@ quit</programlisting>
<answer>
<para>This is usually caused by an interrupt conflict (e.g.,
- two boards using the same IRQ). Boot with the
- <option>-c</option> option and change the
+ two boards using the same IRQ). Boot with
+ <option>-c</option> and change the
<devicename>ed0</devicename>/<devicename>de0</devicename>/...
entry to match your board.</para>
@@ -3420,9 +3420,9 @@ chip1 at pci0:31:5: class=0x040100 c
<filename>/etc/resolv.conf</filename>. This will often
cause a delay in <application>SSH</application>, as the
option <literal>UseDNS</literal> is set to
- <literal>yes</literal> by default in the
- <filename>sshd_config</filename> file in
- <filename class="directory">/etc/ssh</filename>. If this is causing the
+ <literal>yes</literal> by default in
+ <filename>/etc/ssh/sshd_config</filename>.
+ If this is causing the
problem, you will either need to fill in the missing
information in <filename>/etc/resolv.conf</filename> or set
<literal>UseDNS</literal> to <literal>no</literal> in
@@ -3455,7 +3455,7 @@ chip1 at pci0:31:5: class=0x040100 c
<varname>MAX_STRAY_LOG</varname> from
<literal>5</literal> to <literal>0</literal> in your
platform's (e.g., &i386;)
- <filename>intr_machdep.c</filename> file and rebuild the
+ <filename>intr_machdep.c</filename> and rebuild the
new kernel and all the warnings will be
suppressed.</para>
</listitem>
@@ -3643,7 +3643,7 @@ kern.timecounter.hardware: TSC -> i82
<para>Enter &man.sysinstall.8; and choose
<guimenuitem>Configure</guimenuitem>, then
<guimenuitem>Fdisk</guimenuitem>. Select the disk the Boot
- Manager resided on with the <keycap>Space</keycap> key.
+ Manager resided on with <keycap>Space</keycap>.
Press <keycap>W</keycap> to write changes to the drive. A
prompt will appear asking which boot loader to install.
Select this, and it will be restored.</para>
@@ -4439,8 +4439,8 @@ device sio5 at isa? port 0x2b8 tty flags
used to build the currently running system (e.g., you
are compiling &rel.current;-RELEASE on a
&rel2.current;-RELEASE system). If you are attempting
- an upgrade, please read the
- <filename>/usr/src/UPDATING</filename> file, paying
+ an upgrade, please read
+ <filename>/usr/src/UPDATING</filename>, paying
particular attention to the <quote>COMMON ITEMS</quote>
section at the end.</para>
</listitem>
@@ -4697,8 +4697,8 @@ kern.sched.name: ULE</screen>
<para>When you are slicing up your disk, check that the disk
geometry displayed in the FDISK screen is correct (i.e., it
- matches the BIOS numbers); if it is wrong, use the
- <keycap>G</keycap> key to fix it. You may have to do this
+ matches the BIOS numbers); if it is wrong, use
+ <keycap>G</keycap> to fix it. You may have to do this
if there is absolutely nothing on the disk, or if the disk
has been moved from another system. Note that this is only
an issue with the disk that you are going to boot from; &os;
@@ -4965,7 +4965,7 @@ use "disklabel -r" to install initial la
DOS/&windowsnt; partition. Assuming you name that file
something like <filename>c:\bootsect.bsd</filename>
(inspired by <filename>c:\bootsect.dos</filename>), you can
- then edit the <filename>c:\boot.ini</filename> file to come
+ then edit <filename>c:\boot.ini</filename> to come
up with something like this:</para>
<programlisting>[boot loader]
@@ -5461,7 +5461,7 @@ C:\="DOS"</programlisting>
<literal>Avail</literal> columns, usually by a factor of
8%.</para>
- <para>For more details, look up the <option>-m</option> option
+ <para>For more details, look up <option>-m</option>
in &man.tunefs.8;.</para>
</answer>
</qandaentry>
@@ -5520,8 +5520,8 @@ C:\="DOS"</programlisting>
<qandaentry>
<question id="root-not-found-cron-errors">
<para>Why do I keep getting messages like <errorname>root: not
- found</errorname> after editing my
- <filename>crontab</filename> file?</para>
+ found</errorname> after editing
+ <filename>/etc/crontab</filename></para>
</question>
<answer>
@@ -5933,7 +5933,8 @@ options SYSVMSG # enable for
<para>The error comes from the
<application>Kerberos</application> distributed authentication
system. The problem is not fatal but annoying. You can
- either run su with the <option>-K</option> option, or
+ either run <command>su</command> with <option>-K</option>,
+ or
uninstall <application>Kerberos</application> as described
in the next question.</para>
</answer>
@@ -6529,8 +6530,8 @@ EndSection</programlisting>
are running or to read your mail while waiting for an FTP
transfer to finish. Just do <keycombo
action="simul"><keycap>Alt</keycap><keycap>F2</keycap></keycombo>
- (hold down the <keycap>Alt</keycap> key and press the
- <keycap>F2</keycap> key), and you will find a login prompt
+ (hold down <keycap>Alt</keycap> and press
+ <keycap>F2</keycap>), and you will find a login prompt
waiting for you on the second <quote>virtual
console</quote>! When you want to go back to the original
session, do <keycombo
@@ -6605,7 +6606,7 @@ ttyvb "/usr/libexec/getty Pc"
<para>It is imperative that you completely shut down X Window
if it is running, before running this command. If you do not,
your system will probably appear to hang or lock up after
- executing the <command>kill</command> command.</para>
+ executing <command>kill</command>.</para>
</answer>
</qandaentry>
@@ -6665,8 +6666,8 @@ ttyvb "/usr/libexec/getty Pc"
server.</para>
<para>If loaded from &man.rc.8;, <command>xdm</command> should
- be started without any arguments (i.e., as a daemon). The
- <command>xdm</command> command must start
+ be started without any arguments (i.e., as a daemon).
+ <command>xdm</command> must start
<emphasis>after</emphasis> &man.getty.8; runs, or else
<command>getty</command> and <command>xdm</command> will
conflict, locking out the console. The best way around this
@@ -6677,9 +6678,8 @@ ttyvb "/usr/libexec/getty Pc"
<filename>/etc/ttys</filename>, there still is a chance of
conflict between <command>xdm</command> and &man.getty.8;.
One way to avoid this is to add the <literal>vt</literal>
- number in the
- <filename>/usr/local/lib/X11/xdm/Xservers</filename>
- file:</para>
+ number in
+ <filename>/usr/local/lib/X11/xdm/Xservers</filename></para>
<programlisting>:0 local /usr/local/bin/X vt4</programlisting>
@@ -7878,11 +7878,11 @@ default 10.0.0.2 UG
10.0.0.2 10.0.0.1 UH 0 0 tun0</programlisting>
<para>This is assuming that you have used the addresses from
- the handbook, the manual page, or from the
- <filename>ppp.conf.sample</filename> file. If you do not
+ the handbook, the manual page, or from
+ <filename>ppp.conf.sample</filename>. If you do not
have a default route, it may be because you forgot to add
- the <literal>HISADDR</literal> line to the
- <filename>ppp.conf</filename> file.</para>
+ the <literal>HISADDR</literal> line to
+ <filename>ppp.conf</filename>.</para>
<para>Another reason for the default route line being missing
is that you have mistakenly set up a default router in your
@@ -7906,8 +7906,7 @@ default 10.0.0.2 UG
<answer>
<para>This error is usually due that the following section is
- missing in your <filename>/etc/ppp/ppp.linkup</filename>
- file:</para>
+ missing in your <filename>/etc/ppp/ppp.linkup</filename>:</para>
<programlisting>MYADDR:
delete ALL
@@ -8386,7 +8385,7 @@ set dfilter 3 permit 0/0 0/0</programlis
invoked with <option>-bd -q30m</option>, telling it to run
the queue every 30 minutes) or until a <command>sendmail
<option>-q</option></command> is done (perhaps from your
- <filename>ppp.linkup</filename> file).</para>
+ <filename>ppp.linkup</filename>).</para>
</answer>
</qandaentry>
@@ -8741,8 +8740,8 @@ ATDT1234567</programlisting>
if the incoming data is actually a login or shell prompt.
If you have a shell prompt at the remote end, it is possible
to terminate &man.ppp.8; without dropping the line by using
- the <command>close lcp</command> command (a following
- <command>term</command> command) will reconnect you to the
+ <command>close lcp</command> (a following
+ <command>term</command>) will reconnect you to the
shell on the remote machine.</para>
<para>If nothing in your log file indicates why the link might
@@ -8762,7 +8761,7 @@ ATDT1234567</programlisting>
<para>If all else fails, send as much information as you can,
including your config files, how you are starting
&man.ppp.8;, the relevant parts of your log file and the
- output of the <command>netstat -rn</command> command (before
+ output of <command>netstat -rn</command> (before
and after connecting) to the &a.questions; or the <ulink
url="news:comp.unix.bsd.freebsd.misc">comp.unix.bsd.freebsd.misc</ulink>
news group, and someone should point you in the right
@@ -9054,12 +9053,12 @@ hint.sio.7.irq="12"</programlisting>
<para>When changing modes of the file hierarchies rooted in the
files instead of the files themselves,
you have to use either <option>-H</option> or
- <option>-L</option> together with the <option>-R</option>
- option to make this work. See the &man.chmod.1; and
- &man.symlink.7; manual pages for more info.</para>
+ <option>-L</option> together with <option>-R</option>
+ to make this work. See &man.chmod.1; and
+ &man.symlink.7; for more information.</para>
<warning>
- <para>The <option>-R</option> option does a
+ <para><option>-R</option> does a
<emphasis>recursive</emphasis> &man.chmod.1;. Be careful
about specifying directories or symlinks to directories to
&man.chmod.1;. If you want to change the permissions of a
More information about the svn-doc-head
mailing list