PERFORCE change 164969 for review

[Hans Petter Selasky]

http://perforce.freebsd.org/chv.cgi?CH=164969

Change 164969 by hselasky at hselasky_laptop001 on 2009/06/23 14:50:18

	
	USB CORE: New device side mode feature:
	  - make sure the USB_HANDLE_REQUEST() device method can
	    return information about short control read transfers.

Affected files ...

.. //depot/projects/usb/src/sys/dev/usb/net/if_cdce.c#17 edit
.. //depot/projects/usb/src/sys/dev/usb/storage/ustorage_fs.c#23 edit
.. //depot/projects/usb/src/sys/dev/usb/usb_handle_request.c#15 edit
.. //depot/projects/usb/src/sys/dev/usb/usb_if.m#10 edit

Differences ...

==== //depot/projects/usb/src/sys/dev/usb/net/if_cdce.c#17 (text+ko) ====

@@ -764,7 +764,7 @@
 static int
 cdce_handle_request(device_t dev,
     const void *req, void **pptr, uint16_t *plen,
-    uint16_t offset, uint8_t is_complete)
+    uint16_t offset, uint8_t *pstate)
 {
 	return (ENXIO);			/* use builtin handler */
 }

==== //depot/projects/usb/src/sys/dev/usb/storage/ustorage_fs.c#23 (text+ko) ====

@@ -475,10 +475,11 @@
 static int
 ustorage_fs_handle_request(device_t dev,
     const void *preq, void **pptr, uint16_t *plen,
-    uint16_t offset, uint8_t is_complete)
+    uint16_t offset, uint8_t *pstate)
 {
 	struct ustorage_fs_softc *sc = device_get_softc(dev);
 	const struct usb_device_request *req = preq;
+	uint8_t is_complete = *pstate;
 
 	if (!is_complete) {
 		if ((req->bmRequestType == UT_WRITE_CLASS_INTERFACE) &&

==== //depot/projects/usb/src/sys/dev/usb/usb_handle_request.c#15 (text+ko) ====

@@ -198,6 +198,7 @@
 	struct usb_device *udev = xfer->xroot->udev;
 	int error;
 	uint8_t iface_index;
+	uint8_t temp_state;
 
 	if ((req.bmRequestType & 0x1F) == UT_INTERFACE) {
 		iface_index = req.wIndex[0];	/* unicast */
@@ -222,6 +223,10 @@
 		/* end of interfaces non-existing interface */
 		goto tr_stalled;
 	}
+	/* set initial state */
+
+	temp_state = state;
+
 	/* forward request to interface, if any */
 
 	if ((error != 0) &&
@@ -233,7 +238,7 @@
 #endif
 		error = USB_HANDLE_REQUEST(iface->subdev,
 		    &req, ppdata, plen,
-		    off, state);
+		    off, &temp_state);
 	}
 	iface_parent = usbd_get_iface(udev, iface->parent_iface_index);
 
@@ -252,14 +257,18 @@
 	    (iface_parent->subdev != iface->subdev) &&
 	    device_is_attached(iface_parent->subdev)) {
 		error = USB_HANDLE_REQUEST(iface_parent->subdev,
-		    &req, ppdata, plen, off,
-		    state);
+		    &req, ppdata, plen, off, &temp_state);
 	}
 	if (error == 0) {
 		/* negativly adjust pointer and length */
 		*ppdata = ((uint8_t *)(*ppdata)) - off;
 		*plen += off;
-		goto tr_valid;
+
+		if ((state == USB_HR_NOT_COMPLETE) &&
+		    (temp_state == USB_HR_COMPLETE_OK))
+			goto tr_short;
+		else
+			goto tr_valid;
 	} else if (error == ENOTTY) {
 		goto tr_stalled;
 	}
@@ -337,6 +346,12 @@
 	USB_XFER_LOCK(xfer);
 	return (0);
 
+tr_short:
+	mtx_unlock(&Giant);
+	sx_unlock(udev->default_sx + 1);
+	USB_XFER_LOCK(xfer);
+	return (USB_ERR_SHORT_XFER);
+
 tr_stalled:
 	mtx_unlock(&Giant);
 	sx_unlock(udev->default_sx + 1);
@@ -444,6 +459,7 @@
 	uint16_t wValue;
 	uint16_t wIndex;
 	uint8_t state;
+	uint8_t is_complete = 1;
 	usb_error_t err;
 	union {
 		uWord	wStatus;
@@ -596,7 +612,10 @@
 		    USB_ADD_BYTES(&src_zcopy, 0),
 		    &max_len, req, off, state);
 		if (err == 0) {
+			is_complete = 0;
 			goto tr_valid;
+		} else if (err == USB_ERR_SHORT_XFER) {
+			goto tr_valid;
 		}
 		/*
 		 * Reset zero-copy pointer and max length
@@ -735,7 +754,7 @@
 	if (rem > xfer->max_data_length) {
 		rem = usbd_xfer_max_len(xfer);
 	}
-	if (rem != max_len) {
+	if ((rem != max_len) && (is_complete != 0)) {
 		/*
 	         * If we don't transfer the data we can transfer, then
 	         * the transfer is short !

==== //depot/projects/usb/src/sys/dev/usb/usb_if.m#10 (text+ko) ====

@@ -36,6 +36,11 @@
 
 # The device received a control request
 #
+# The value pointed to by "pstate" can be updated to
+# "USB_HR_COMPLETE_OK" to indicate that the control
+# read transfer is complete, in case of short USB
+# control transfers.
+#
 # Return values:
 # 0: Success
 # ENOTTY: Transaction stalled
@@ -47,5 +52,5 @@
 	void **pptr; /* data pointer */
 	uint16_t *plen; /* maximum transfer length */
 	uint16_t offset; /* data offset */
-	uint8_t is_complete; /* set if transfer is complete, see USB_HR_XXX */
+	uint8_t *pstate; /* set if transfer is complete, see USB_HR_XXX */
 };