PERFORCE change 155687 for review
Rene Ladan
rene at FreeBSD.org
Mon Jan 5 22:49:44 UTC 2009
http://perforce.freebsd.org/chv.cgi?CH=155687
Change 155687 by rene at rene_self on 2009/01/05 22:49:30
Translate first 18% of solid-state article.
Use English copyright notice for now.
Affected files ...
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/articles/solid-state/article.sgml#3 edit
Differences ...
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/articles/solid-state/article.sgml#3 (text+ko) ====
@@ -36,12 +36,12 @@
<!DOCTYPE article PUBLIC "-//FreeBSD//DTD DocBook V4.1-Based Extension//EN" [
<!ENTITY % articles.ent PUBLIC "-//FreeBSD//ENTITIES DocBook FreeBSD Articles Entity Set//EN">
%articles.ent;
-<!ENTITY legalnotice SYSTEM "../../share/sgml/legalnotice.sgml">
+<!ENTITY legalnotice SYSTEM "../../../en_US.ISO8859-1/share/sgml/legalnotice.sgml">
]>
<article lang="nl">
<articleinfo>
- <title>FreeBSD and Solid State Devices</title>
+ <title>&os; en Solid State Devices</title>
<authorgroup>
<author>
@@ -53,10 +53,10 @@
</affiliation>
</author>
</authorgroup>
-
+
<copyright>
<year>2001</year>
- <holder>The FreeBSD Documentation Project</holder>
+ <holder>The &os; Documentation Project</holder>
</copyright>
<legalnotice id="trademarks" role="trademarks">
@@ -66,50 +66,58 @@
</legalnotice>
&legalnotice;
-
+
<abstract>
- <para>This article covers the use of solid state disk devices in FreeBSD
- to create embedded systems.</para>
-
- <para>Embedded systems have the advantage of increased stability due to
- the lack of integral moving parts (hard drives). Account must be
- taken, however, for the generally low disk space available in the
- system and the durability of the storage medium.</para>
+ <para>Dit artikel behandelt het gebruik van solid state
+ disk-apparaten in &os; voor het maken van embeddded
+ systemen.</para>
+
+ <para>Embedded systemen hebben het voordeel van verhoogde
+ stabiliteit wegens het ontbreken van bewegende delen (harde
+ schijven). Er moet echter rekening worden gehouden met de over
+ het algemeen weinig beschikbare schijfruimte in het systeem en
+ de duurzaamheid van het opslagmedium.</para>
- <para>Specific topics to be covered include the types and attributes of
- solid state media suitable for disk use in FreeBSD, kernel options
- that are of interest in such an environment, the
- <filename>rc.diskless</filename> mechanisms that automate the
- initialization of such systems and the need for read-only filesystems,
- and building filesystems from scratch. The article will conclude
- with some general strategies for small and read-only FreeBSD
- environments.</para>
+ <para>Specifieke onderwerpen die aan bod komen omvatten de typen
+ en attributen van solid state-media die geschikt zijn om in &os;
+ als schijf te gebruiken, kernelopties die interessant zijn in
+ zo'n omgeving, de mechanismen van
+ <filename>rc.diskless</filename> die de initialisatie van zulke
+ systemen automatiseren en de noodzaak voor alleen-lezen
+ bestandssystemen, en het van voor af aan bouwen van
+ bestandssystemen. Het artikel zal afsluiten met wat algemene
+ strategiën voor kleine en alleen-lezen
+ &os;-omgevingen.</para>
<para><emphasis>Vertaald door René Ladan</emphasis>.</para>
</abstract>
</articleinfo>
<sect1 id="intro">
- <title>Solid State Disk Devices</title>
+ <title>Solid State Disk-apparaten</title>
- <para>The scope of this article will be limited to solid state disk
- devices made from flash memory. Flash memory is a solid state memory
- (no moving parts) that is non-volatile (the memory maintains data even
- after all power sources have been disconnected). Flash memory can
- withstand tremendous physical shock and is reasonably fast (the flash
- memory solutions covered in this article are slightly slower than a EIDE
- hard disk for write operations, and much faster for read operations).
- One very important aspect of flash memory, the ramifications of which
- will be discussed later in this article, is that each sector has a
- limited rewrite capacity. You can only write, erase, and write again to
- a sector of flash memory a certain number of times before the sector
- becomes permanently unusable. Although many flash memory products
- automatically map bad blocks, and although some even distribute write
- operations evenly throughout the unit, the fact remains that there
- exists a limit to the amount of writing that can be done to the device.
- Competitive units have between 1,000,000 and 10,000,000 writes per
- sector in their specification. This figure varies due to the
- temperature of the environment.</para>
+ <para>Het bereik van dit artikel zal beperkt zijn tot solid state
+ disk-apparaten die gemaakt zijn met flash-geheugen.
+ Flash-geheugen is een solid state-geheugen (geen bewegende
+ onderdelen) dat niet-vluchtig is (het geheugen blijft gegevens
+ behouden zelf nadat alle stroombronnen zijn ontkoppeld).
+ Flash-geheugen kan enorme fysieke schokken weerstaan en is
+ redelijk snel (de oplossingen met flash-geheugens die in dit
+ artikel worden behandeld zijn iets langzamer dan een EIDE-harde
+ schijf voor schrijfbewerkingen, en veel sneller voor
+ leesbewerkingen). Een heel belangrijk aspect van flash-geheugen,
+ waarvan de ramnificaties later in dit artikel besproken zullen
+ worden, is dat elke sector een beperkte herschijfcapaciteit heeft.
+ Een sector flash-geheugen kan maar een bepald aantal keren
+ beschreven, gewist, en herschreven worden voordat de sector
+ permanent onbruikbaar wordt. Hoewel veel flash-geheugenproducten
+ automatisch slechte blokken in kaart brengen, en hoewel sommigen
+ zelfs schrijfoperaties gelijkmatig over de eenheid distribueren,
+ blijft het een feit dat er een limiet bestaat aan de hoeveelheid
+ waarmee het apparaat kan worden beschreven. Concurrerende
+ apparaten hebben tussen de 1.000.000 en 10.000.000
+ schrijfbewerkingen per sector in hun specificaties staan. Dit
+ getal varieert vanwege de omgevingstemperatuur.</para>
<para>Specifically, we will be discussing ATA compatible compact-flash
units and the M-Systems &diskonchip; flash memory unit. ATA compatible
@@ -325,7 +333,7 @@
<tbody>
<row>
<entry><para><screen>&prompt.root; <userinput>mknod /dev/ad0a c 116 0</userinput>
-&prompt.root; <userinput>mknod /dev/ad0c c 116 2</userinput>
+&prompt.root; <userinput>mknod /dev/ad0c c 116 2</userinput>
&prompt.root; <userinput>disklabel -e /dev/ad0c</userinput></screen></para></entry>
<entry><para><screen>&prompt.root; <userinput>mknod /dev/fla0a c 102 0</userinput>
@@ -399,7 +407,7 @@
</tbody>
</tgroup>
</informaltable>
-
+
<para>Bring this machine up on the network so we may transfer our tar
file and explode it onto our flash media filesystem. One example of
how to do this is:</para>
@@ -474,7 +482,7 @@
<step>
<para><screen>&prompt.root; <userinput>mount /dev/vn0c /mnt</userinput></screen></para>
</step>
-
+
<step>
<para>Place your kernel file into <filename>/mnt</filename>, replacing
the existing one</para>
@@ -580,7 +588,7 @@
<filename>/var/db/pkg</filename>. An example:</para>
<screen>&prompt.root; <userinput>ln -s /etc/pkg /var/db/pkg</userinput></screen>
-
+
<para>Add another line in <filename>/etc/rc.diskless2</filename> that
creates and populates
<filename>/var/db/port.mkversion</filename></para>
@@ -618,7 +626,7 @@
<para>First, add the directory <literal>log/apache</literal> to the list
of directories to be created in
<filename>/etc/rc.diskless2</filename>.</para>
-
+
<para>Second, add these commands to
<filename>/etc/rc.diskless2</filename> after the directory creation
section:</para>
@@ -635,4 +643,3 @@
</sect2>
</sect1>
</article>
-
More information about the p4-projects
mailing list