PERFORCE change 160149 for review
Rene Ladan
rene at FreeBSD.org
Thu Apr 2 08:23:21 PDT 2009
http://perforce.freebsd.org/chv.cgi?CH=160149
Change 160149 by rene at rene_self on 2009/04/02 15:23:10
Update draft translation of solid-state to cvs 1.14
Affected files ...
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/articles/solid-state/article.sgml#9 edit
Differences ...
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/articles/solid-state/article.sgml#9 (text+ko) ====
@@ -30,7 +30,7 @@
$FreeBSD: $
%SOURCE% en_US.ISO8859-1/articles/solid-state/article.sgml
- %SRCID% 1.13
+ %SRCID% 1.14
-->
<!DOCTYPE article PUBLIC "-//FreeBSD//DTD DocBook V4.1-Based Extension//EN" [
@@ -56,12 +56,12 @@
<copyright>
<year>2001</year>
+ <year>2009</year>
<holder>The &os; Documentation Project</holder>
</copyright>
<legalnotice id="trademarks" role="trademarks">
&tm-attrib.freebsd;
- &tm-attrib.m-systems;
&tm-attrib.general;
</legalnotice>
@@ -120,25 +120,14 @@
getal varieert vanwege de omgevingstemperatuur.</para>
<para>In het bijzonder worden ATA-compatibele compact-flash eenheden
- en de M-Systems &diskonchip; flash-geheugeneenheid besproken.
- ATA-compatibele flash-kaarten zijn vrij populair als opslagmedium
- voor digitale camera's. Bijzonder interessant is het feit dat de
- pinnen ervan precies met die van de IDE-bus overeenkomen en dat ze
- compatibel zijn met de ATA-commandoverzamling. Daarom kunnen deze
- apparaten direct aan een IDE-bus in een computer gekoppeld worden
- met een zeer eenvoudige en goedkope adaptor. Eenmaal op deze
- wijze geïmplementeerd zien besturingssystemen zoals &os; het
- apparaat als een normale harde schijf (doch klein). Het product
- M-Systems &diskonchip; is gebaseerd op dezelfde onderliggende
- flash-geheugentechnologie als ATA-compatibele compact-flash
- kaarten, maar heeft een DIP-vorm en is niet ATA-compatibel. Om
- zo'n apparaat te gebruiken, moet u het niet alleen op een
- moederbord installeren dat een &diskonchip;-stekker heeft, u moet
- ook het stuurprogramma `fla` in elke &os;-kernel bouwen waarmee u
- het wilt gebruiken. Verder verblijven er kritieke,
- fabrikantspecifieke gegevens in de opstartsector van dit apparaat,
- dus moet u ervoor oppassen dat u niet de &os; (of enig andere)
- bootloader installeert wanneer u dit gebruikt.</para>
+ besproken, welke vrij populair zijn als opslagmedium voor digitale
+ camera's. Bijzonder interessant is het feit dat de pinnen ervan
+ precies met die van de IDE-bus overeenkomen en dat ze compatibel
+ zijn met de ATA-commandoverzameling. Daarom kunnen deze apparaten
+ direct aan een IDE-bus in een computer gekoppeld worden met een
+ zeer eenvoudige en goedkope adaptor. Eenmaal op deze wijze
+ geïmplementeerd zien besturingssystemen zoals &os; het
+ apparaat als een normale harde schijf (doch klein).</para>
<para>Er bestaan nog andere solid state disk-oplossingen, maar hun
kosten, zeldzaamheid, en relatieve gebruiksongemak plaatst ze
@@ -170,11 +159,6 @@
<programlisting>options MFS # Geheugenbestandssysteem
options MD_ROOT # md-apparaat bruikbaar als een potentieel root-apparaat
pseudo-device md # geheugenschijf</programlisting>
-
- <para>Ten tweede, als u het M-Systems &diskonchip;-product gaat
- gebruiken, moet u ook deze regel opnemen:</para>
-
- <programlisting>device fla0 at isa?</programlisting>
</sect1>
<sect1 id="ro-fs">
@@ -279,13 +263,9 @@
<title>Een bestandssysteem uit het niets opbouwen</title>
<para>Omdat ATA-compatibele compact-flash-kaarten door &os; als
- normale IDE harde schijven worden gezien, wat een M-Systems
- &diskonchip; product is (wanneer u een kernel draait met daarin
- het stuurprogramma fla ingebouwd), kunt u theoretisch &os; vanaf
- het netwerk installeren door de floppies kern en mfsroot of een
- CD te gebruiken. Afgezien van het feit dat u geen bootloader van
- welke soort dan ook naar het M-Systems apparaat moet schrijven,
- zijn er geen speciale instructies nodig.</para>
+ normale IDE harde schijven worden gezien, kunt u theoretisch &os;
+ vanaf het netwerk installeren door de floppies kern en mfsroot of
+ een CD te gebruiken.</para>
<para>Zelfs een kleine installatie van &os; die normale
installatieprocedures gebruikt kan echter een systeem produceren
@@ -306,12 +286,7 @@
installatie wordt uitgevoerd, moeten bewerkingen zoals partitioneren,
labelen, het aanmaken van bestandssystemen, etc. met de hand
uitgevoerd worden. Naast de floppies kern en mfsroot heeft u ook
- de floppy fixit nodig. Als u een M-Systems &diskonchip; gebruikt,
- moet de kernel op uw floppy kern de optie <literal>fla</literal>
- zoals uitgelegd in <xref linkend="kernel"> in zich gecompileerd
- hebben. Bekijk alstublieft <xref linkend="kern.flp"> voor
- instructies over hoe een nieuwe kernel voor
- <filename>kern.flp</filename> aan te maken.</para>
+ de floppy fixit nodig.</para>
<procedure>
<step>
@@ -327,9 +302,7 @@
type of the partition, make sure the value is set to
<literal>165</literal>. Now write this partition table to the disk
by pressing the <keycap>w</keycap> key (this is a hidden option on
- this screen). When presented with a menu to choose a boot manager,
- take care to select <literal>None</literal> if you are using an
- M-Systems &diskonchip;. If you are using an ATA compatible compact
+ this screen). If you are using an ATA compatible compact
flash card, you should choose the FreeBSD Boot Manager. Now press
the <keycap>q</keycap> key to quit the partition menu. You will be
shown the boot manager menu once more - repeat the choice you made
@@ -343,35 +316,11 @@
installation menu choose the <literal>fixit</literal> option. After
entering the fixit environment, enter the following commands:</para>
- <informaltable frame="none" pgwide="1">
- <tgroup cols="2">
- <thead>
- <row>
- <entry align="center">ATA compatible</entry>
-
- <entry align="center">&diskonchip;</entry>
- </row>
- </thead>
- <tbody>
- <row>
- <entry><para><screen>&prompt.root; <userinput>mknod /dev/ad0a c 116 0</userinput>
+ <para><screen>&prompt.root; <userinput>mknod /dev/ad0a c 116 0</userinput>
&prompt.root; <userinput>mknod /dev/ad0c c 116 2</userinput>
-&prompt.root; <userinput>disklabel -e /dev/ad0c</userinput></screen></para></entry>
-
- <entry><para><screen>&prompt.root; <userinput>mknod /dev/fla0a c 102 0</userinput>
-&prompt.root; <userinput>mknod /dev/fla0c c 102 2</userinput>
-&prompt.root; <userinput>disklabel -e /dev/fla0c</userinput></screen></para></entry>
- </row>
- </tbody>
- </tgroup>
- </informaltable>
-
+&prompt.root; <userinput>disklabel -e /dev/ad0c</userinput></screen></para>
<para>At this point you will have entered the vi editor under the
- auspices of the disklabel command. If you are using &diskonchip;,
- the first step will be to change the type value near the beginning
- of the file from <literal>ESDI</literal> to
- <literal>DOC2K</literal>. Next, regardless of whether you are using
- &diskonchip; or ATA compatible compact flash media, you need to add
+ auspices of the disklabel command. Next, you need to add
an <literal>a:</literal> line at the end of the file. This
<literal>a:</literal> line should look like:</para>
@@ -384,26 +333,8 @@
sure that fstype is <literal>4.2BSD</literal>. Save the file and
exit.</para>
- <informaltable frame="none" pgwide="1">
- <tgroup cols="2">
- <thead>
- <row>
- <entry align="center">ATA compatible</entry>
-
- <entry align="center">&diskonchip;</entry>
- </row>
- </thead>
- <tbody>
- <row>
- <entry><para><screen>&prompt.root; <userinput>disklabel -B -r /dev/ad0c</userinput>
-&prompt.root; <userinput>newfs /dev/ad0a</userinput></screen></para></entry>
-
- <entry><para><screen>&prompt.root; <userinput>disklabel -B -r /dev/fla0c</userinput>
-&prompt.root; <userinput>newfs /dev/fla0a</userinput></screen></para></entry>
- </row>
- </tbody>
- </tgroup>
- </informaltable>
+ <para><screen>&prompt.root; <userinput>disklabel -B -r /dev/ad0c</userinput>
+&prompt.root; <userinput>newfs /dev/ad0a</userinput></screen></para>
</step>
<step>
@@ -411,25 +342,8 @@
<para>Mount the newly prepared flash media:</para>
- <informaltable frame="none" pgwide="1">
- <tgroup cols="2">
- <thead>
- <row>
- <entry align="center">ATA compatible</entry>
-
- <entry align="center">&diskonchip;</entry>
- </row>
- </thead>
- <tbody>
- <row>
- <entry><para><screen>&prompt.root; <userinput>mount /dev/ad0a /flash</userinput></screen></para></entry>
+ <para><screen>&prompt.root; <userinput>mount /dev/ad0a /flash</userinput></screen></para>
- <entry><para><screen>&prompt.root; <userinput>mount /dev/fla0a /flash</userinput></screen></para></entry>
- </row>
- </tbody>
- </tgroup>
- </informaltable>
-
<para>Bring this machine up on the network so we may transfer our tar
file and explode it onto our flash media filesystem. One example of
how to do this is:</para>
@@ -471,53 +385,6 @@
</procedure>
</sect1>
- <sect1 id="kern.flp">
- <title>Building a <filename>kern.flp</filename> Installation Floppy with
- the fla Driver</title>
-
- <note>
- <para>This section of the article is relevant only to those using
- M-Systems &diskonchip; flash media.</para>
- </note>
-
- <para>It is possible that your <filename>kern.flp</filename> boot floppy
- does not have a kernel with the <devicename>fla</devicename> driver
- compiled into it necessary for the system to recognize the &diskonchip;.
- If you have booted off of the installation floppies and are told that no
- disks are present, then you are probably lacking the
- <devicename>fla</devicename> driver in your kernel.</para>
-
- <para>After you have built a kernel with <devicename>fla</devicename>
- support that is smaller than 1.4 megabytes, you can create a custom
- <filename>kern.flp</filename> floppy image with it by following these
- instructions:</para>
-
- <procedure>
- <step>
- <para>Obtain an existing kern.flp image file</para>
- </step>
-
- <step>
- <para><screen>&prompt.root; <userinput>vnconfig vn0c kern.flp</userinput></screen></para>
- </step>
-
- <step>
- <para><screen>&prompt.root; <userinput>mount /dev/vn0c /mnt</userinput></screen></para>
- </step>
-
- <step>
- <para>Place your kernel file into <filename>/mnt</filename>, replacing
- the existing one</para>
- </step>
-
- <step>
- <para><screen>&prompt.root; <userinput>vnconfig -d vn0c</userinput></screen></para>
- </step>
- </procedure>
-
- <para>Your <filename>kern.flp</filename> file now has your new kernel on it.</para>
- </sect1>
-
<sect1 id="strategies">
<title>System Strategies for Small and Read Only Environments</title>
More information about the p4-projects
mailing list