PERFORCE change 144284 for review
Hans Petter Selasky
hselasky at FreeBSD.org
Sun Jun 29 16:03:42 UTC 2008
http://perforce.freebsd.org/chv.cgi?CH=144284
Change 144284 by hselasky at hselasky_laptop001 on 2008/06/29 16:02:50
These are the new USB userland exported header files.
Affected files ...
.. //depot/projects/usb/src/sys/dev/usb2/include/ufm2_ioctl.h#2 edit
.. //depot/projects/usb/src/sys/dev/usb2/include/urio2_ioctl.h#2 edit
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_cdc.h#2 edit
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_defs.h#1 add
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_endian.h#1 add
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_error.h#1 add
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_hid.h#1 add
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_ioctl.h#2 edit
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_mfunc.h#1 add
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_revision.h#1 add
.. //depot/projects/usb/src/sys/dev/usb2/include/usb2_standard.h#2 edit
Differences ...
==== //depot/projects/usb/src/sys/dev/usb2/include/ufm2_ioctl.h#2 (text+ko) ====
==== //depot/projects/usb/src/sys/dev/usb2/include/urio2_ioctl.h#2 (text+ko) ====
==== //depot/projects/usb/src/sys/dev/usb2/include/usb2_cdc.h#2 (text+ko) ====
==== //depot/projects/usb/src/sys/dev/usb2/include/usb2_ioctl.h#2 (text+ko) ====
@@ -1,0 +1,142 @@
+/*-
+ * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
+ * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
+ * Copyright (c) 1998 Lennart Augustsson. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _USB2_IOCTL_H_
+#define _USB2_IOCTL_H_
+
+#include <sys/ioccom.h>
+
+#define USB_DEVICE_NAME "usb"
+
+struct usb2_ctl_request {
+ void *ucr_data;
+ uint16_t ucr_flags;
+#define USB_USE_POLLING 0x0001 /* internal flag */
+#define USB_SHORT_XFER_OK 0x0004 /* allow short reads */
+#define USB_DELAY_STATUS_STAGE 0x0010 /* insert delay before STATUS stage */
+ uint16_t ucr_actlen; /* actual length transferred */
+ uint8_t ucr_addr;
+ struct usb2_device_request ucr_request;
+};
+
+struct usb2_alt_interface {
+ uint8_t uai_interface_index;
+ uint8_t uai_alt_index;
+};
+
+struct usb2_gen_descriptor {
+ void *ugd_data;
+ uint16_t ugd_lang_id;
+ uint16_t ugd_maxlen;
+ uint16_t ugd_actlen;
+ uint16_t ugd_offset;
+ uint8_t ugd_config_index;
+ uint8_t ugd_string_index;
+ uint8_t ugd_iface_index;
+ uint8_t ugd_altif_index;
+ uint8_t ugd_endpt_index;
+ uint8_t reserved[8];
+};
+
+#define USB_MAX_DEVNAMES 4
+#define USB_MAX_DEVNAMELEN 16
+
+struct usb2_device_info {
+ uint16_t udi_productNo;
+ uint16_t udi_vendorNo;
+ uint16_t udi_releaseNo;
+ uint16_t udi_power; /* power consumption in mA, 0 if
+ * selfpowered */
+ uint8_t udi_bus;
+ uint8_t udi_addr; /* device address */
+ uint8_t udi_class;
+ uint8_t udi_subclass;
+ uint8_t udi_protocol;
+ uint8_t udi_config;
+ uint8_t udi_speed;
+ uint8_t udi_nports;
+ uint8_t udi_ports[16]; /* HUB only: addresses of devices on
+ * ports */
+#define USB_PORT_ENABLED 0xff
+#define USB_PORT_SUSPENDED 0xfe
+#define USB_PORT_POWERED 0xfd
+#define USB_PORT_DISABLED 0xfc
+
+ char udi_product[128];
+ char udi_vendor[128];
+ char udi_release[8];
+ char udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN];
+};
+
+struct usb2_device_stats {
+ uint32_t uds_requests_ok[4]; /* Indexed by transfer type UE_XXX */
+ uint32_t uds_requests_fail[4]; /* Indexed by transfer type UE_XXX */
+};
+
+struct usb2_device_enumerate {
+ uint8_t ude_addr; /* not used */
+};
+
+/* USB controller */
+#define USB_REQUEST _IOWR('U', 1, struct usb2_ctl_request)
+#define USB_SETDEBUG _IOW ('U', 2, int)
+#define USB_DISCOVER _IO ('U', 3)
+#define USB_DEVICEINFO _IOWR('U', 4, struct usb2_device_info)
+#define USB_DEVICESTATS _IOR ('U', 5, struct usb2_device_stats)
+#define USB_DEVICEENUMERATE _IOW ('U', 6, struct usb2_device_enumerate)
+
+/* Generic HID device */
+#define USB_GET_REPORT_DESC _IOR ('U', 21, struct usb2_ctl_report_desc)
+#define USB_SET_IMMED _IOW ('U', 22, int)
+#define USB_GET_REPORT _IOWR('U', 23, struct usb2_gen_descriptor)
+#define USB_SET_REPORT _IOW ('U', 24, struct usb2_gen_descriptor)
+#define USB_GET_REPORT_ID _IOR ('U', 25, int)
+
+/* Generic USB device */
+#define USB_GET_CONFIG _IOR ('U', 100, int)
+#define USB_SET_CONFIG _IOW ('U', 101, int)
+#define USB_GET_ALTINTERFACE _IOWR('U', 102, struct usb2_alt_interface)
+#define USB_SET_ALTINTERFACE _IOWR('U', 103, struct usb2_alt_interface)
+#define USB_GET_DEVICE_DESC _IOR ('U', 105, struct usb2_device_descriptor)
+#define USB_GET_CONFIG_DESC _IOR ('U', 106, struct usb2_config_descriptor)
+#define USB_GET_INTERFACE_DESC _IOR ('U', 107, struct usb2_interface_descriptor)
+#define USB_GET_ENDPOINT_DESC _IOR ('U', 108, struct usb2_endpoint_descriptor)
+#define USB_GET_FULL_DESC _IOWR('U', 109, struct usb2_gen_descriptor)
+#define USB_GET_STRING_DESC _IOWR('U', 110, struct usb2_gen_descriptor)
+#define USB_DO_REQUEST _IOWR('U', 111, struct usb2_ctl_request)
+#define USB_GET_DEVICEINFO _IOR ('U', 112, struct usb2_device_info)
+#define USB_SET_SHORT_XFER _IOW ('U', 113, int)
+#define USB_SET_TIMEOUT _IOW ('U', 114, uint32_t)
+#define USB_GET_FRAME_SIZE _IOR ('U', 115, uint32_t)
+#define USB_GET_BUFFER_SIZE _IOR ('U', 117, uint32_t)
+#define USB_SET_BUFFER_SIZE _IOW ('U', 118, uint32_t)
+
+/* Modem device */
+#define USB_GET_CM_OVER_DATA _IOR ('U', 130, int)
+#define USB_SET_CM_OVER_DATA _IOW ('U', 131, int)
+
+#endif /* _USB2_IOCTL_H_ */
==== //depot/projects/usb/src/sys/dev/usb2/include/usb2_standard.h#2 (text+ko) ====
@@ -1,0 +1,493 @@
+/*-
+ * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
+ * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
+ * Copyright (c) 1998 Lennart Augustsson. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _USB2_STANDARD_H_
+#define _USB2_STANDARD_H_
+
+#include <dev/usb2/include/usb2_endian.h>
+
+/* Definition of some USB constants */
+
+#define USB_MAX_DEVICES 128 /* including virtual root HUB and
+ * address zero */
+#define USB_START_ADDR 0 /* default USB device BUS address
+ * after USB bus reset */
+
+#define USB_CONTROL_ENDPOINT 0 /* default control endpoint */
+#define USB_MAX_ENDPOINTS (2*16) /* 2 directions on 16 endpoints */
+
+#define USB_FRAMES_PER_SECOND_FS 1000 /* full speed */
+#define USB_FRAMES_PER_SECOND_HS 8000 /* high speed */
+
+#define USB_FS_BYTES_PER_HS_UFRAME 188 /* bytes */
+#define USB_HS_MICRO_FRAMES_MAX 8 /* units */
+
+/*
+ * Minimum time a device needs to be powered down to go through a
+ * power cycle. These values are not in the USB specification.
+ */
+#define USB_POWER_DOWN_TIME 200 /* ms */
+#define USB_PORT_POWER_DOWN_TIME 100 /* ms */
+
+#if 0
+/* These are the values from the USB specification. */
+#define USB_PORT_RESET_DELAY 10 /* ms */
+#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */
+#define USB_PORT_RESET_RECOVERY 10 /* ms */
+#define USB_PORT_POWERUP_DELAY 100 /* ms */
+#define USB_SET_ADDRESS_SETTLE 2 /* ms */
+#define USB_RESUME_DELAY (20*5) /* ms */
+#define USB_RESUME_WAIT 10 /* ms */
+#define USB_RESUME_RECOVERY 10 /* ms */
+#define USB_EXTRA_POWER_UP_TIME 0 /* ms */
+#else
+/* Allow for marginal and non-conforming devices. */
+#define USB_PORT_RESET_DELAY 50 /* ms */
+#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */
+#define USB_PORT_RESET_RECOVERY 250 /* ms */
+#define USB_PORT_POWERUP_DELAY 300 /* ms */
+#define USB_SET_ADDRESS_SETTLE 10 /* ms */
+#define USB_RESUME_DELAY (50*5) /* ms */
+#define USB_RESUME_WAIT 50 /* ms */
+#define USB_RESUME_RECOVERY 50 /* ms */
+#define USB_EXTRA_POWER_UP_TIME 20 /* ms */
+#endif
+
+#define USB_MIN_POWER 100 /* mA */
+#define USB_MAX_POWER 500 /* mA */
+
+#define USB_BUS_RESET_DELAY 100 /* ms */
+
+/*
+ * USB record layout in memory:
+ *
+ * - USB config 0
+ * - USB interfaces
+ * - USB alternative interfaces
+ * - USB pipes
+ *
+ * - USB config 1
+ * - USB interfaces
+ * - USB alternative interfaces
+ * - USB pipes
+ */
+
+/* Declaration of USB records */
+
+struct usb2_device_request {
+ uByte bmRequestType;
+ uByte bRequest;
+ uWord wValue;
+ uWord wIndex;
+ uWord wLength;
+} __packed;
+
+#define UT_WRITE 0x00
+#define UT_READ 0x80
+#define UT_STANDARD 0x00
+#define UT_CLASS 0x20
+#define UT_VENDOR 0x40
+#define UT_DEVICE 0x00
+#define UT_INTERFACE 0x01
+#define UT_ENDPOINT 0x02
+#define UT_OTHER 0x03
+
+#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE)
+#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE)
+#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT)
+#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE)
+#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE)
+#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT)
+#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE)
+#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE)
+#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER)
+#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT)
+#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE)
+#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
+#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER)
+#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT)
+#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE)
+#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE)
+#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER)
+#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT)
+#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE)
+#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
+#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER)
+#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)
+
+/* Requests */
+#define UR_GET_STATUS 0x00
+#define UR_CLEAR_FEATURE 0x01
+#define UR_SET_FEATURE 0x03
+#define UR_SET_ADDRESS 0x05
+#define UR_GET_DESCRIPTOR 0x06
+#define UDESC_DEVICE 0x01
+#define UDESC_CONFIG 0x02
+#define UDESC_STRING 0x03
+#define USB_LANGUAGE_TABLE 0x00 /* Index of the language ID table
+ * string */
+#define UDESC_INTERFACE 0x04
+#define UDESC_ENDPOINT 0x05
+#define UDESC_DEVICE_QUALIFIER 0x06
+#define UDESC_OTHER_SPEED_CONFIGURATION 0x07
+#define UDESC_INTERFACE_POWER 0x08
+#define UDESC_OTG 0x09
+#define UDESC_CS_DEVICE 0x21 /* class specific */
+#define UDESC_CS_CONFIG 0x22
+#define UDESC_CS_STRING 0x23
+#define UDESC_CS_INTERFACE 0x24
+#define UDESC_CS_ENDPOINT 0x25
+#define UDESC_HUB 0x29
+#define UR_SET_DESCRIPTOR 0x07
+#define UR_GET_CONFIG 0x08
+#define UR_SET_CONFIG 0x09
+#define UR_GET_INTERFACE 0x0a
+#define UR_SET_INTERFACE 0x0b
+#define UR_SYNCH_FRAME 0x0c
+
+/* HUB specific request */
+#define UR_GET_BUS_STATE 0x02
+#define UR_CLEAR_TT_BUFFER 0x08
+#define UR_RESET_TT 0x09
+#define UR_GET_TT_STATE 0x0a
+#define UR_STOP_TT 0x0b
+
+/* Feature numbers */
+#define UF_ENDPOINT_HALT 0
+#define UF_DEVICE_REMOTE_WAKEUP 1
+#define UF_TEST_MODE 2
+
+/* HUB specific features */
+#define UHF_C_HUB_LOCAL_POWER 0
+#define UHF_C_HUB_OVER_CURRENT 1
+#define UHF_PORT_CONNECTION 0
+#define UHF_PORT_ENABLE 1
+#define UHF_PORT_SUSPEND 2
+#define UHF_PORT_OVER_CURRENT 3
+#define UHF_PORT_RESET 4
+#define UHF_PORT_POWER 8
+#define UHF_PORT_LOW_SPEED 9
+#define UHF_C_PORT_CONNECTION 16
+#define UHF_C_PORT_ENABLE 17
+#define UHF_C_PORT_SUSPEND 18
+#define UHF_C_PORT_OVER_CURRENT 19
+#define UHF_C_PORT_RESET 20
+#define UHF_PORT_TEST 21
+#define UHF_PORT_INDICATOR 22
+
+struct usb2_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bDescriptorSubtype;
+} __packed;
+
+struct usb2_device_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord bcdUSB;
+#define UD_USB_2_0 0x0200
+#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0)
+ uByte bDeviceClass;
+ uByte bDeviceSubClass;
+ uByte bDeviceProtocol;
+ uByte bMaxPacketSize;
+ /* The fields below are not part of the initial descriptor. */
+ uWord idVendor;
+ uWord idProduct;
+ uWord bcdDevice;
+ uByte iManufacturer;
+ uByte iProduct;
+ uByte iSerialNumber;
+ uByte bNumConfigurations;
+} __packed;
+
+/* Device class codes */
+#define UDCLASS_IN_INTERFACE 0x00
+#define UDCLASS_COMM 0x02
+#define UDCLASS_HUB 0x09
+#define UDSUBCLASS_HUB 0x00
+#define UDPROTO_FSHUB 0x00
+#define UDPROTO_HSHUBSTT 0x01
+#define UDPROTO_HSHUBMTT 0x02
+#define UDCLASS_DIAGNOSTIC 0xdc
+#define UDCLASS_WIRELESS 0xe0
+#define UDSUBCLASS_RF 0x01
+#define UDPROTO_BLUETOOTH 0x01
+#define UDCLASS_VENDOR 0xff
+
+struct usb2_config_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord wTotalLength;
+ uByte bNumInterface;
+ uByte bConfigurationValue;
+#define USB_UNCONFIG_NO 0
+ uByte iConfiguration;
+ uByte bmAttributes;
+#define UC_BUS_POWERED 0x80
+#define UC_SELF_POWERED 0x40
+#define UC_REMOTE_WAKEUP 0x20
+ uByte bMaxPower; /* max current in 2 mA units */
+#define UC_POWER_FACTOR 2
+} __packed;
+
+struct usb2_interface_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bInterfaceNumber;
+ uByte bAlternateSetting;
+ uByte bNumEndpoints;
+ uByte bInterfaceClass;
+ uByte bInterfaceSubClass;
+ uByte bInterfaceProtocol;
+ uByte iInterface;
+} __packed;
+
+/* Interface class codes */
+#define UICLASS_UNSPEC 0x00
+#define UICLASS_AUDIO 0x01 /* audio */
+#define UISUBCLASS_AUDIOCONTROL 1
+#define UISUBCLASS_AUDIOSTREAM 2
+#define UISUBCLASS_MIDISTREAM 3
+
+#define UICLASS_CDC 0x02 /* communication */
+#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1
+#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2
+#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3
+#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4
+#define UISUBCLASS_CAPI_CONTROLMODEL 5
+#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
+#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
+#define UIPROTO_CDC_AT 1
+#define UIPROTO_CDC_ETH_512X4 0x76 /* FreeBSD specific */
+
+#define UICLASS_HID 0x03
+#define UISUBCLASS_BOOT 1
+#define UIPROTO_BOOT_KEYBOARD 1
+#define UIPROTO_MOUSE 2
+
+#define UICLASS_PHYSICAL 0x05
+#define UICLASS_IMAGE 0x06
+#define UICLASS_PRINTER 0x07
+#define UISUBCLASS_PRINTER 1
+#define UIPROTO_PRINTER_UNI 1
+#define UIPROTO_PRINTER_BI 2
+#define UIPROTO_PRINTER_1284 3
+
+#define UICLASS_MASS 0x08
+#define UISUBCLASS_RBC 1
+#define UISUBCLASS_SFF8020I 2
+#define UISUBCLASS_QIC157 3
+#define UISUBCLASS_UFI 4
+#define UISUBCLASS_SFF8070I 5
+#define UISUBCLASS_SCSI 6
+#define UIPROTO_MASS_CBI_I 0
+#define UIPROTO_MASS_CBI 1
+#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */
+#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */
+
+#define UICLASS_HUB 0x09
+#define UISUBCLASS_HUB 0
+#define UIPROTO_FSHUB 0
+#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */
+#define UIPROTO_HSHUBMTT 1
+
+#define UICLASS_CDC_DATA 0x0a
+#define UISUBCLASS_DATA 0
+#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */
+#define UIPROTO_DATA_HDLC 0x31 /* HDLC */
+#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */
+#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */
+#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */
+#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */
+#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */
+#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */
+#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */
+#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */
+#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */
+#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc. */
+#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */
+
+#define UICLASS_SMARTCARD 0x0b
+#define UICLASS_FIRM_UPD 0x0c
+#define UICLASS_SECURITY 0x0d
+#define UICLASS_DIAGNOSTIC 0xdc
+#define UICLASS_WIRELESS 0xe0
+#define UISUBCLASS_RF 0x01
+#define UIPROTO_BLUETOOTH 0x01
+
+#define UICLASS_APPL_SPEC 0xfe
+#define UISUBCLASS_FIRMWARE_DOWNLOAD 1
+#define UISUBCLASS_IRDA 2
+#define UIPROTO_IRDA 0
+
+#define UICLASS_VENDOR 0xff
+#define UISUBCLASS_XBOX360_CONTROLLER 0x5d
+#define UIPROTO_XBOX360_GAMEPAD 0x01
+
+struct usb2_endpoint_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bEndpointAddress;
+#define UE_GET_DIR(a) ((a) & 0x80)
+#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7))
+#define UE_DIR_IN 0x80
+#define UE_DIR_OUT 0x00
+#define UE_DIR_ANY 0xff /* for internal use only! */
+#define UE_ADDR 0x0f
+#define UE_ADDR_ANY 0xff /* for internal use only! */
+#define UE_GET_ADDR(a) ((a) & UE_ADDR)
+ uByte bmAttributes;
+#define UE_XFERTYPE 0x03
+#define UE_CONTROL 0x00
+#define UE_ISOCHRONOUS 0x01
+#define UE_BULK 0x02
+#define UE_INTERRUPT 0x03
+#define UE_BULK_INTR 0xfe /* for internal use only! */
+#define UE_TYPE_ANY 0xff /* for internal use only! */
+#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE)
+#define UE_ISO_TYPE 0x0c
+#define UE_ISO_ASYNC 0x04
+#define UE_ISO_ADAPT 0x08
+#define UE_ISO_SYNC 0x0c
+#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE)
+ uWord wMaxPacketSize;
+#define UE_ZERO_MPS 0xFFFF /* for internal use only */
+ uByte bInterval;
+} __packed;
+
+struct usb2_string_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord bString[126];
+ uByte bUnused;
+} __packed;
+
+#define USB_MAKE_STRING_DESC(m,name) \
+struct name { \
+ uByte bLength; \
+ uByte bDescriptorType; \
+ uByte bData[sizeof((uint8_t []){m})]; \
+} __packed; \
+static const struct name name = { \
+ .bLength = sizeof(struct name), \
+ .bDescriptorType = UDESC_STRING, \
+ .bData = { m }, \
+}
+
+struct usb2_hub_descriptor {
+ uByte bDescLength;
+ uByte bDescriptorType;
+ uByte bNbrPorts;
+ uWord wHubCharacteristics;
+#define UHD_PWR 0x0003
+#define UHD_PWR_GANGED 0x0000
+#define UHD_PWR_INDIVIDUAL 0x0001
+#define UHD_PWR_NO_SWITCH 0x0002
+#define UHD_COMPOUND 0x0004
+#define UHD_OC 0x0018
+#define UHD_OC_GLOBAL 0x0000
+#define UHD_OC_INDIVIDUAL 0x0008
+#define UHD_OC_NONE 0x0010
+#define UHD_TT_THINK 0x0060
+#define UHD_TT_THINK_8 0x0000
+#define UHD_TT_THINK_16 0x0020
+#define UHD_TT_THINK_24 0x0040
+#define UHD_TT_THINK_32 0x0060
+#define UHD_PORT_IND 0x0080
+ uByte bPwrOn2PwrGood; /* delay in 2 ms units */
+#define UHD_PWRON_FACTOR 2
+ uByte bHubContrCurrent;
+ uByte DeviceRemovable[32]; /* max 255 ports */
+#define UHD_NOT_REMOV(desc, i) \
+ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
+ /* deprecated */ uByte PortPowerCtrlMask[1];
+} __packed;
+
+struct usb2_device_qualifier {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord bcdUSB;
+ uByte bDeviceClass;
+ uByte bDeviceSubClass;
+ uByte bDeviceProtocol;
+ uByte bMaxPacketSize0;
+ uByte bNumConfigurations;
+ uByte bReserved;
+} __packed;
+
+struct usb2_otg_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bmAttributes;
+#define UOTG_SRP 0x01
+#define UOTG_HNP 0x02
+} __packed;
+
+/* OTG feature selectors */
+#define UOTG_B_HNP_ENABLE 3
+#define UOTG_A_HNP_SUPPORT 4
+#define UOTG_A_ALT_HNP_SUPPORT 5
+
+struct usb2_status {
+ uWord wStatus;
+/* Device status flags */
+#define UDS_SELF_POWERED 0x0001
+#define UDS_REMOTE_WAKEUP 0x0002
+/* Endpoint status flags */
+#define UES_HALT 0x0001
+} __packed;
+
+struct usb2_hub_status {
+ uWord wHubStatus;
+#define UHS_LOCAL_POWER 0x0001
+#define UHS_OVER_CURRENT 0x0002
+ uWord wHubChange;
+} __packed;
+
+struct usb2_port_status {
+ uWord wPortStatus;
+#define UPS_CURRENT_CONNECT_STATUS 0x0001
+#define UPS_PORT_ENABLED 0x0002
+#define UPS_SUSPEND 0x0004
+#define UPS_OVERCURRENT_INDICATOR 0x0008
+#define UPS_RESET 0x0010
+#define UPS_PORT_MODE_DEVICE 0x0020 /* currently FreeBSD specific */
+#define UPS_PORT_POWER 0x0100
+#define UPS_LOW_SPEED 0x0200
+#define UPS_HIGH_SPEED 0x0400
+#define UPS_PORT_TEST 0x0800
+#define UPS_PORT_INDICATOR 0x1000
+ uWord wPortChange;
+#define UPS_C_CONNECT_STATUS 0x0001
+#define UPS_C_PORT_ENABLED 0x0002
+#define UPS_C_SUSPEND 0x0004
+#define UPS_C_OVERCURRENT_INDICATOR 0x0008
+#define UPS_C_PORT_RESET 0x0010
+} __packed;
+
+#endif /* _USB2_STANDARD_H_ */
More information about the p4-projects
mailing list