PERFORCE change 112508 for review

[Matt Jacob]

http://perforce.freebsd.org/chv.cgi?CH=112508

Change 112508 by mjacob at mjexp on 2007/01/05 00:33:33

	
	Add code to help test multipathing by putting in a sysctl
	per-MPT instance that will fail commands to the next target_id
	that matches to this mpt with a SELECTION FAILURE. The default
	for this code is to be turned off.

Affected files ...

.. //depot/projects/mjexp/sys/dev/mpt/mpt.c#4 edit
.. //depot/projects/mjexp/sys/dev/mpt/mpt.h#4 edit
.. //depot/projects/mjexp/sys/dev/mpt/mpt_cam.c#6 edit

Differences ...

==== //depot/projects/mjexp/sys/dev/mpt/mpt.c#4 (text+ko) ====

@@ -2000,7 +2000,12 @@
 	SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
 		       "role", CTLFLAG_RD, &mpt->role, 0,
 		       "HBA role");
+#ifdef	MPT_TEST_MULTIPATH
+	SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
+		       "failure_id", CTLFLAG_RW, &mpt->failure_id, -1,
+		       "Next Target to Fail");
 #endif
+#endif
 }
 
 int
@@ -2120,6 +2125,9 @@
 	}
 	STAILQ_INIT(&mpt->trt_wildcard.atios);
 	STAILQ_INIT(&mpt->trt_wildcard.inots);
+#ifdef	MPT_TEST_MULTIPATH
+	mpt->failure_id = -1;
+#endif
 	mpt->scsi_tgt_handler_id = MPT_HANDLER_ID_NONE;
 	mpt_sysctl_attach(mpt);
 	mpt_lprt(mpt, MPT_PRT_DEBUG, "doorbell req = %s\n",

==== //depot/projects/mjexp/sys/dev/mpt/mpt.h#4 (text+ko) ====

@@ -159,6 +159,7 @@
 #define	MPT_U64_2_SCALAR(y)	((((uint64_t)y.High) << 32) | (y.Low))
 
 /****************************** Misc Definitions ******************************/
+/* #define MPT_TEST_MULTIPATH	1 */
 #define MPT_OK (0)
 #define MPT_FAIL (0x10000)
 
@@ -535,6 +536,9 @@
 	u_int			role;	/* role: none, ini, target, both */
 
 	u_int			verbose;
+#ifdef	MPT_TEST_MULTIPATH
+	int			failure_id;
+#endif
 
 	/*
 	 * IOC Facts

==== //depot/projects/mjexp/sys/dev/mpt/mpt_cam.c#6 (text+ko) ====

@@ -2907,6 +2907,13 @@
 			mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
 			break;
 		}
+#ifdef	MPT_TEST_MULTIPATH
+		if (mpt->failure_id == ccb->ccb_h.target_id) {
+			ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
+			mpt_set_ccb_status(ccb, CAM_SEL_TIMEOUT);
+			break;
+		}
+#endif
 		ccb->csio.scsi_status = SCSI_STATUS_OK;
 		mpt_start(sim, ccb);
 		return;