PERFORCE change 48182 for review

[Peter Wemm]

http://perforce.freebsd.org/chv.cgi?CH=48182

Change 48182 by peter at peter_daintree on 2004/03/04 21:37:43

	whitespace and gratuitous change sync

Affected files ...

.. //depot/projects/hammer/sys/amd64/conf/NOTES#11 edit

Differences ...

==== //depot/projects/hammer/sys/amd64/conf/NOTES#11 (text+ko) ====

@@ -3,9 +3,7 @@
 #
 # This file contains machine dependent kernel configuration notes.  For
 # machine independent notes, look in /sys/conf/NOTES.
-# (XXX from i386:NOTES,v 1.1106; merge in updates)
-# $FreeBSD: src/sys/amd64/conf/NOTES.fixed,v 1.1 2004/02/29 19:32:02 peter Exp $
-#
+# (XXX from i386:NOTES,v 1.1132)
 # $FreeBSD: src/sys/amd64/conf/NOTES,v 1.5 2004/03/03 09:26:40 obrien Exp $
 #
 
@@ -46,7 +44,7 @@
 #
 
 # Optional:
-device		atpic
+device		atpic			# Legacy pic
 device		mptable
 options 	NO_MIXED_MODE		# Disable use of mixed mode
 
@@ -59,7 +57,7 @@
 # deleting the specification for CPUs you don't need to use may make
 # parts of the system run faster.
 #
-cpu		HAMMER
+cpu		HAMMER			# aka K8, aka Opteron & Athlon64
 
 #
 # Options for CPU features.
@@ -69,7 +67,7 @@
 # PERFMON causes the driver for Pentium/Pentium Pro performance counters
 # to be compiled.  See perfmon(4) for more information.
 #
-#X#options 	PERFMON
+#XXX#options 	PERFMON
 
 
 #####################################################################
@@ -185,7 +183,7 @@
 # is to load both as modules.
 
 device 		tdfx			# Enable 3Dfx Voodoo support
-#X#options 	TDFX_LINUX		# Enable Linuxulator support
+#XXX#options 	TDFX_LINUX		# Enable Linuxulator support
 
 #
 # ACPI support using the Intel ACPI Component Architecture reference
@@ -247,8 +245,8 @@
 #XXX#device		ed
 #XXX#device		lnc
 
-#X#device	ath
-#X#device	ath_hal		# Atheros HAL (includes binary component)
+#XXX#device	ath
+#XXX#device	ath_hal		# Atheros HAL (includes binary component)
 device		wlan		# 802.11 layer
 
 #
@@ -259,7 +257,7 @@
 
 #
 # SCSI host adapters:
-# 
+#
 # ncv: NCR 53C500 based SCSI host adapters.
 # nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
 # stg: TMC 18C30, 18C50 based SCSI host adapters.
@@ -300,8 +298,8 @@
 #  The Rev 2 host cards use a 32K chunk, on a 32K boundary.
 #  The cards can use an IRQ of 11, 12 or 15.
 
-#X#device		cy	1
-#X#options 	CY_PCI_FASTINTR		# Use with cy_pci unless irq is shared
+#XXX#device		cy	1
+#XXX#options 	CY_PCI_FASTINTR		# Use with cy_pci unless irq is shared
 device		digi
 hint.digi.0.at="isa"
 hint.digi.0.port="0x104"
@@ -452,37 +450,37 @@
 #XXX these 32 bit binaries is added.
 
 # Enable iBCS2 runtime support for SCO and ISC binaries
-#X#options 	IBCS2
+#XXX#options 	IBCS2
 
 # Emulate spx device for client side of SVR3 local X interface
-#X#options 	SPX_HACK
+#XXX#options 	SPX_HACK
 
 # Enable Linux ABI emulation
-#X#options 	COMPAT_LINUX
+#XXX#options 	COMPAT_LINUX
 
 # Enable the linux-like proc filesystem support (requires COMPAT_LINUX
 # and PSEUDOFS)
-#X#options 	LINPROCFS
+#XXX#options 	LINPROCFS
 
 #
 # SysVR4 ABI emulation
 #
 # The svr4 ABI emulator can be statically compiled into the kernel or loaded as
-# a KLD module.  
-# The STREAMS network emulation code can also be compiled statically or as a 
+# a KLD module.
+# The STREAMS network emulation code can also be compiled statically or as a
 # module.  If loaded as a module, it must be loaded before the svr4 module
 # (the /usr/sbin/svr4 script does this for you).  If compiling statically,
 # the `streams' device must be configured into any kernel which also
-# specifies COMPAT_SVR4.  It is possible to have a statically-configured 
+# specifies COMPAT_SVR4.  It is possible to have a statically-configured
 # STREAMS device and a dynamically loadable svr4 emulator;  the /usr/sbin/svr4
 # script understands that it doesn't need to load the `streams' module under
 # those circumstances.
 # Caveat:  At this time, `options KTRACE' is required for the svr4 emulator
-# (whether static or dynamic).  
+# (whether static or dynamic).
 # 
-#X#options 	COMPAT_SVR4	# build emulator statically
-#X#options 	DEBUG_SVR4	# enable verbose debugging
-#X#device	streams		# STREAMS network driver (required for svr4).
+#XXX#options 	COMPAT_SVR4	# build emulator statically
+#XXX#options 	DEBUG_SVR4	# enable verbose debugging
+#XXX#device	streams		# STREAMS network driver (required for svr4).
 
 
 #####################################################################
@@ -501,8 +499,8 @@
 options 	FB_INSTALL_CDEV		# install a CDEV entry in /dev
 
 # PECOFF module (Win32 Execution Format)
-#X#options 	PECOFF_SUPPORT		# only knows 32 bit file format
-#X#options 	PECOFF_DEBUG
+#XXX#options 	PECOFF_SUPPORT		# only knows 32 bit file format
+#XXX#options 	PECOFF_DEBUG
 
 options 	ENABLE_ALART
 options 	KBDIO_DEBUG=2