amd64 xen hvm shutdown

Richard Kojedzinszky krichy at tvnetwork.hu
Wed Jan 25 10:40:57 UTC 2012


Dear Colin,

My config for this domain is here:

kernel = "/usr/lib/xen-4.0/boot/hvmloader"
builder = "hvm"

name = 'db.real-charts.com'
memory = 512
vcpus = 1
cpus = '1-3'
disk = [
         'phy:/dev/sys/db.real-charts.com-root,xvda,w',
         'phy:/dev/sys/db.real-charts.com-swap,xvdb,w',
         'phy:/dev/sys/db.real-charts.com-tmp,xvdc,w',
         'phy:/dev/sys/db.real-charts.com-var,xvdd,w',
         'phy:/dev/sys/db.real-charts.com-usr,xvde,w'
]
vif = [ 'mac=00:16:3e:00:04:01,bridge=eth0' ]

vnc = 1
boot = "c"
stdvga = 1
localtime = 0

hpet = 1
acpi = 1
apic = 1
pae = 1
usb = 0

on_poweroff = "destroy"
on_reboot = "restart"
on_crash = "restart"

But as I read the documentation, on_poweroff means what to do when the 
domain powers itself off. But for me it seems, that xen sends a halt to 
the freebsd domain, exactly as if I issue a
# halt
In that case, the domain does halt, and shows that the system is halted, 
and press any key to reboot. Unfortunately I dont have a freebsd on real 
hardware, so I dont know if issue a halt on that does it powers itself 
off.

But when inside the domain, and I issue poweroff, it works as expected, I 
guess it sends an acpi poweroff to xen, and then tha virtual machine gets 
stopped.

Regards,

Kojedzinszky Richard
Euronet Magyarorszag Informatikai Zrt.

On Wed, 25 Jan 2012, Colin Percival wrote:

> Date: Wed, 25 Jan 2012 02:16:27 -0800
> From: Colin Percival <cperciva at freebsd.org>
> To: Richard Kojedzinszky <krichy at tvnetwork.hu>
> Cc: freebsd-xen at FreeBSD.org
> Subject: Re: amd64 xen hvm shutdown
> 
> On 01/25/12 02:09, Richard Kojedzinszky wrote:
>> I am looking for a solution to be able to shutdown my freebsd 9.0 amd64 xen hvm
>> domain from outside, from the host. Precisely, when the host is halted, it
>> issues an
>> # xm shutdown domain --halt --wait
>>
>> to the domain, and the domain does not poweroff. It behaves as if I issue a halt
>> inside of it, and not a poweroff. Is there a way to have it power down itself?
>
> That sounds like a Xen configuration issue ("poweroff behaviour"?) rather than a
> FreeBSD issue to me.
>
> -- 
> Colin Percival
> Security Officer, FreeBSD | freebsd.org | The power to serve
> Founder / author, Tarsnap | tarsnap.com | Online backups for the truly paranoid
>


More information about the freebsd-xen mailing list