drm2 deprecation in base: problems with gpu-firmware-kmod port

Alexey Dokuchaev danfe at nsu.ru
Wed Aug 29 11:45:57 UTC 2018


Hi there,

I've tried the kernel after drm2 bits were removed from the base to see
how they would be served by the ports.  This is on -CURRENT/i386 with
Radeon HD 4350/4550 (RV710) gfx card.  I've installed gpu-firmware-kmod
and drm-legacy-kmod ports, and rebooted into new kernel.  I don't use
kld_list="..." and only load a few modules from /boot/loader.conf, like
HDD controller and sound drivers, nothing gfx-related.

First thing I do after console login is "kldload radeonkms", had always
worked like a charm.  Now it's broken:

  ...
  info: [drm] radeon: 512M of VRAM memory ready
  info: [drm] radeon: 512M of GTT memory ready.
  info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  info: [drm] Driver supports precise vblank timestamp query.
  info: [drm] MSI enabled 1 message(s)
  drmn0: info: radeon: using MSI.
  info: [drm] radeon: irq initialized.
  info: [drm] GART: num cpu pages 131072, num gpu pages 131072
  info: [drm] probing gen 2 caps for device 8086:2e31 = 1/0
  info: [drm] Loading RV710 Microcode
  radeonkmsfw_RV710_pfp: could not load firmware image, error 2
  error: [drm:pid16419:r600_init_microcode] *ERROR* r600_cp: Failed to load firmware "radeonkmsfw_RV710_pfp"
  error: [drm:pid16419:rv770_startup] *ERROR* Failed to load firmware!
  drmn0: error: disabling GPU acceleration
  drmn0: warning: 0x18b7d200 unpin not necessary
  drmn0: warning: 0x18b7d200 unpin not necessary
  error: [drm:pid16419:rv770_init] *ERROR* radeon: ucode required for R600+.
  drmn0: error: Fatal error during GPU init

I have this file with the previous kernel (when it all was in the base):

  /boot/kernel.june/radeonkmsfw_RV710_pfp.ko (11908 bytes).

With the drm2/firmware bits served from ports, the name is different:

  $ pkg info -l gpu-firmware-kmod | grep RV710_pfp
        /boot/modules/radeon_RV710_pfp_bin.ko

File size is also different: 10428 bytes.  How shall I proceed from this
point to get things back in working order?  Thanks,

./danfe


More information about the freebsd-x11 mailing list