Xorg fails w/scfb: Cannot run in framebuffer mode. Please specify busIDs
Bob Willcox
bob at immure.com
Mon Mar 20 18:59:20 UTC 2017
On Mon, Mar 20, 2017 at 11:20:22AM -0700, Pete Wright wrote:
>
>
> On 03/20/17 11:15, Bob Willcox wrote:
> > On Mon, Mar 20, 2017 at 11:07:15AM -0700, Pete Wright wrote:
> >>
> >> On 03/20/17 11:04, Bob Willcox wrote:
> >>> I had to reboot my system this morning (power outage over the weekend forced
> >>> it) and now X won't start, failing with these error msgs from the Xorg.log:
> >>>
> >>> [ 143.327] (EE) open /dev/dri/card0: No such file or directory
> >>> [ 143.327] (WW) Falling back to old probe method for modesetting
> >>> [ 143.327] (EE) open /dev/dri/card0: No such file or directory
> >>> [ 143.327] (WW) Falling back to old probe method for scfb
> >>> [ 143.327] scfb trace: probe start
> >>> [ 143.327] (II) scfb(1): using default device
> >>> [ 143.327] scfb trace: probe done
> >>> [ 143.327] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
> >>> [ 143.327] (EE) Screen 0 deleted because of no matching config section.
> >>> [ 143.327] (II) UnloadModule: "modesetting"
> >>> [ 143.327] (EE)
> >>>
> >>> Fatal server error:
> >>> [ 143.327] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
> >>> [ 143.328] (EE)
> >>> [ 143.328] (EE)
> >>>
> >>> This is on an Intel NUC system with a i7-5557U (Broadwell) CPU. The uname -a
> >>> output is:
> >>>
> >>> FreeBSD tavion.austin.ibm.com 10.3-STABLE FreeBSD 10.3-STABLE #3 r315638: Mon Mar 20 11:44:00 CDT 2017 root at tavion.austin.ibm.com:/usr/obj/usr/src/sys/TAVION amd64
> >>>
> >>> This system has been running with the scfb frame buffer driver for a couple of
> >>> years now with X running fine (if a bit slow).
> >>>
> >>> I just updated my ports 3/14 to revision 436172. Hadn't rebooted till today.
> >>>
> >>> I updated the system this morning hoping that would help, but no such luck as
> >>> I still get the same failure.
> >>>
> >>> Note that I am loading the i915kms.ko module as instructed in the
> >>> /usr/ports/UPDATING file (have been doing that all along) so it would seem
> >>> that I've run into something else.
> >>>
> >>> Also, reading the FreeBSD wiki for SCFB I added this file in
> >>> /usr/local/bin/etc/xorg.conf.d/driver-scfb.conf:
> >>>
> >>> Section "Device"
> >>> Identifier "Card0"
> >>> Driver "scfb"
> >>> EndSection
> >>>
> >>> Without any descernable change.
> >> On my i7 skylake system I have inserted this like in my xorg.conf:
> >>
> >> BusID "PCI:0:2:0"
> >>
> >> This has allowed me to use modesetting, intel and scfb Xorg drivers
> >> without issue. I am not sure why X isn't able to autodetect the
> >> appropriate BusID though...
> >>
> >> hope this helps,
> >> -pete
> >>
> >> --
> >> Pete Wright
> >> pete at nomadlogic.org
> >> @nomadlogicLA
> > Thanks for the reply Pete. Would you mind sending me all of your xorg.conf
> > file? For some reason this system had been running w/o one all this time but I
> > think it's time for me to create one for it. At this point the closest thing I
> > have to one is the driver-scfb.conf file I showed above.
>
> sure thing - although to be clear i think the preferred method is to
> *not* use a configuration file, so hopefully someone with more info than
> me can help determine why BusID detection is failing on your system.
>
> here is an example device section you can drop at
> /usr/local/etc/xorg.conf.d/driver-scfb.conf or which ever location suits
> you best:
>
> Section "Device"
> Identifier "Card0"
> Driver "scfb"
> BusID "PCI:0:2:0"
> EndSection
>
>
> also, here is my full Xorg as well - although hopefully you won't need this:
>
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> ModulePath "/usr/local/lib/xorg/modules"
> FontPath "/usr/local/share/fonts/misc/"
> FontPath "/usr/local/share/fonts/TTF/"
> FontPath "/usr/local/share/fonts/OTF/"
> FontPath "/usr/local/share/fonts/Type1/"
> FontPath "/usr/local/share/fonts/100dpi/"
> FontPath "/usr/local/share/fonts/75dpi/"
> FontPath "/usr/local/share/fonts/bitstream-vera/"
> EndSection
>
> Section "Module"
> Load "glx"
> Load "glamoregl"
> Load "freetype"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
> ### <percent>: "<f>%"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "AccelMethod" # <str>
> #Option "Backlight" # <str>
> #Option "DRI" # <str>
> #Option "ColorKey" # <i>
> #Option "VideoKey" # <i>
> #Option "Tiling" # [<bool>]
> #Option "LinearFramebuffer" # [<bool>]
> #Option "SwapbuffersWait" # [<bool>]
> #Option "TripleBuffer" # [<bool>]
> #Option "XvPreferOverlay" # [<bool>]
> #Option "HotPlug" # [<bool>]
> #Option "ReprobeOutputs" # [<bool>]
> #Option "XvMC" # [<bool>]
> #Option "ZaphodHeads" # <str>
> #Option "TearFree" # [<bool>]
> #Option "PerCrtcPixmaps" # [<bool>]
> #Option "FallbackDebug" # [<bool>]
> #Option "DebugFlushBatches" # [<bool>]
> #Option "DebugFlushCaches" # [<bool>]
> #Option "DebugWait" # [<bool>]
> #Option "BufferCache" # [<bool>]
> Identifier "Card0"
> Driver "scfb"
> BusID "PCI:0:2:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
>
> Cheers,
> -pete
>
>
> --
> Pete Wright
> pete at nomadlogic.org
> @nomadlogicLA
Hmm, with the BusID "PCI:0:2:0" added to my config file I now get sigmentation
faults on startup. Below is the backtrace info from the Xorg.0.log. I've also
attached the full Xorg.0.log and xorg.conf files in case that helps identify
what's wrong.
[ 7020.659] (EE) AIGLX: reverting to software rendering
[ 7020.792] (EE)
[ 7020.792] (EE) Backtrace:
[ 7020.795] (EE) 0: /usr/local/bin/X (OsInit+0x38a) [0x59d61a]
[ 7020.798] (EE) 1: /lib/libthr.so.3 (_pthread_sigmask+0x506) [0x802b46e56]
[ 7020.801] (EE) 2: /lib/libthr.so.3 (_pthread_getspecific+0xdfc) [0x802b46ddc]
[ 7020.804] (EE) 3: ? (?+0xdfc) [0x7ffffffffdff]
[ 7020.808] (EE) 4: /usr/local/llvm39/lib/libLLVM-3.9.so (_ZN4llvm13StringMapImpl15LookupBucketForENS_9StringRefE+0x7d) [0x8098aee6d]
[ 7020.811] (EE) 5: /usr/local/llvm39/lib/libLLVM-3.9.so (_ZNSt3__16vectorIPN4llvm2cl14OptionCategoryENS_9allocatorIS4_EEE21__push_back_slow_pathIS4_EEvOT_+0x22f) [0x8098823cf]
[ 7020.815] (EE) 6: /usr/local/llvm39/lib/libLLVM-3.9.so (LLVMParseCommandLineOptions+0x1c2c) [0x80988063c]
[ 7020.819] (EE) 7: /usr/local/llvm39/lib/libLLVM-3.9.so (_ZN4llvm2cl6Option11addArgumentEv+0x7c) [0x80987434c]
[ 7020.822] (EE) 8: /usr/local/llvm36/lib/libLLVM-3.6.so (_ZN4llvm32createPPCTargetTransformInfoPassEPKNS_16PPCTargetMachineE+0xc12) [0x80e7f7b64]
[ 7020.826] (EE) 9: /usr/local/llvm36/lib/libLLVM-3.6.so (LLVMInitializeARMTargetInfo+0x112) [0x80e7fe9b4]
[ 7020.830] (EE) 10: /usr/local/llvm36/lib/libLLVM-3.6.so (_init+0xe) [0x80d82313c]
[ 7020.832] (EE) 11: ? (_rtld_is_dlopened+0x1ad7) [0x800809ec7]
[ 7020.835] (EE) 12: ? (dlopen+0x190) [0x800805280]
[ 7020.838] (EE) 13: /usr/local/lib/xorg/modules/extensions/libglx.so (_init+0x1e24b) [0x804849edb]
[ 7020.841] (EE) 14: /usr/local/lib/xorg/modules/extensions/libglx.so (_init+0x1d6ff) [0x80484880f]
[ 7020.844] (EE) 15: /usr/local/lib/xorg/modules/extensions/libglx.so (_init+0x1cd4e) [0x8048473ee]
[ 7020.847] (EE) 16: /usr/local/bin/X (InitExtensions+0x61) [0x4a7b91]
[ 7020.850] (EE) 17: /usr/local/bin/X (remove_fs_handlers+0x301) [0x439dd1]
[ 7020.853] (EE) 18: /usr/local/bin/X (_start+0x16f) [0x42501f]
[ 7020.856] (EE) 19: ? (?+0x16f) [0x80082456f]
[ 7020.856] (EE)
[ 7020.856] (EE) Segmentation fault at address 0x0
[ 7020.856] (EE)
Fatal server error:
[ 7020.856] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 7020.856] (EE)
[ 7020.856] (EE)
--
Bob Willcox | You're dead, Jim.
bob at immure.com | -- McCoy, "The Tholian Web", stardate unknown
Austin, TX |
-------------- next part --------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/share/fonts/misc/"
FontPath "/usr/local/share/fonts/TTF/"
FontPath "/usr/local/share/fonts/OTF/"
FontPath "/usr/local/share/fonts/Type1/"
FontPath "/usr/local/share/fonts/100dpi/"
FontPath "/usr/local/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "CustomEDID" # <str>
#Option "DRI" # <str>
#Option "Present" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "HWRotation" # [<bool>]
#Option "VSync" # [<bool>]
#Option "PageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "VirtualHeads" # <i>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "scfb"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
-------------- next part --------------
[ 7020.647]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 7020.647] X Protocol Version 11, Revision 0
[ 7020.647] Build Operating System: FreeBSD 10.3-SYNTH amd64
[ 7020.648] Current Operating System: FreeBSD tavion.austin.ibm.com 10.3-STABLE FreeBSD 10.3-STABLE #3 r315638: Mon Mar 20 11:44:00 CDT 2017 root at tavion.austin.ibm.com:/usr/obj/usr/src/sys/TAVION amd64
[ 7020.648] Build Date: 14 March 2017 11:10:36PM
[ 7020.648]
[ 7020.648] Current version of pixman: 0.34.0
[ 7020.648] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7020.648] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7020.648] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 20 13:45:03 2017
[ 7020.649] (==) Using config file: "/etc/X11/xorg.conf"
[ 7020.649] (==) ServerLayout "X.org Configured"
[ 7020.649] (**) |-->Screen "Screen0" (0)
[ 7020.649] (**) | |-->Monitor "Monitor0"
[ 7020.649] (**) | |-->Device "Card0"
[ 7020.649] (**) |-->Input Device "Mouse0"
[ 7020.649] (**) |-->Input Device "Keyboard0"
[ 7020.649] (==) Automatically adding devices
[ 7020.649] (==) Automatically enabling devices
[ 7020.649] (==) Not automatically adding GPU devices
[ 7020.649] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 7020.650] (**) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 7020.650] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 7020.650] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 7020.650] (WW) Disabling Mouse0
[ 7020.650] (WW) Disabling Keyboard0
[ 7020.650] (II) Loader magic: 0x802c00
[ 7020.650] (II) Module ABI versions:
[ 7020.650] X.Org ANSI C Emulation: 0.4
[ 7020.650] X.Org Video Driver: 20.0
[ 7020.650] X.Org XInput driver : 22.1
[ 7020.650] X.Org Server Extension : 9.0
[ 7020.650] (--) PCI:*(0:0:2:0) 8086:162b:8086:2057 rev 9, Mem @ 0xa9000000/16777216, 0xb0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/65536
[ 7020.650] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 7020.650] (II) LoadModule: "glx"
[ 7020.651] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 7020.654] (II) Module glx: vendor="X.Org Foundation"
[ 7020.654] compiled for 1.18.4, module version = 1.0.0
[ 7020.654] ABI class: X.Org Server Extension, version 9.0
[ 7020.654] (==) AIGLX enabled
[ 7020.654] (II) LoadModule: "scfb"
[ 7020.655] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so
[ 7020.655] (II) Module scfb: vendor="X.Org Foundation"
[ 7020.655] compiled for 1.18.4, module version = 0.0.4
[ 7020.655] ABI class: X.Org Video Driver, version 20.0
[ 7020.655] (II) scfb: driver for wsdisplay framebuffer: scfb
[ 7020.655] (--) Using syscons driver with X support (version 0.x)
[ 7020.655] (--) using VT number 9
[ 7020.655] (WW) Falling back to old probe method for scfb
[ 7020.655] scfb trace: probe start
[ 7020.655] (II) scfb(0): using default device
[ 7020.656] scfb trace: probe done
[ 7020.656] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 7020.656] scfb: PreInit 0
[ 7020.656] (II) scfb(0): Using: depth (32), width (1280), height (1024)
[ 7020.656] (==) scfb(0): Depth 24, (==) framebuffer bpp 32
[ 7020.656] (==) scfb(0): RGB weight 888
[ 7020.656] (==) scfb(0): Default visual is TrueColor
[ 7020.656] (==) scfb(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7020.656] (II) scfb(0): Vidmem: 5120k
[ 7020.656] (==) scfb(0): DPI set to (96, 96)
[ 7020.656] (**) scfb(0): Using "Shadow Framebuffer"
[ 7020.656] (II) Loading sub module "shadow"
[ 7020.656] (II) LoadModule: "shadow"
[ 7020.656] (II) Loading /usr/local/lib/xorg/modules/libshadow.so
[ 7020.656] (II) Module shadow: vendor="X.Org Foundation"
[ 7020.656] compiled for 1.18.4, module version = 1.1.0
[ 7020.656] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7020.656] (II) Loading sub module "fb"
[ 7020.656] (II) LoadModule: "fb"
[ 7020.657] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 7020.658] (II) Module fb: vendor="X.Org Foundation"
[ 7020.658] compiled for 1.18.4, module version = 1.0.0
[ 7020.658] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7020.658] scfb: PreInit done
[ 7020.658] (--) Depth 24 pixmap format is 32 bpp
[ 7020.658] scfb: ScfbScreenInit 0
[ 7020.658] bitsPerPixel=32, depth=24, defaultVisual=TrueColor
mask: ff0000,ff00,ff, offset: 16,8,0
[ 7020.658] mmap returns: addr 0x807400000 len 0x500000, fd 7, off 0
[ 7020.658] scfb: ScfbSave 0
[ 7020.658] scfb: ScfbSave done
[ 7020.658] (==) scfb(0): Backing store enabled
[ 7020.659] scfb: ScfbScreenInit done
[ 7020.659] (==) RandR enabled
[ 7020.659] (II) AIGLX: Screen 0 is not DRI2 capable
[ 7020.659] (EE) AIGLX: reverting to software rendering
[ 7020.792] (EE)
[ 7020.792] (EE) Backtrace:
[ 7020.795] (EE) 0: /usr/local/bin/X (OsInit+0x38a) [0x59d61a]
[ 7020.798] (EE) 1: /lib/libthr.so.3 (_pthread_sigmask+0x506) [0x802b46e56]
[ 7020.801] (EE) 2: /lib/libthr.so.3 (_pthread_getspecific+0xdfc) [0x802b46ddc]
[ 7020.804] (EE) 3: ? (?+0xdfc) [0x7ffffffffdff]
[ 7020.808] (EE) 4: /usr/local/llvm39/lib/libLLVM-3.9.so (_ZN4llvm13StringMapImpl15LookupBucketForENS_9StringRefE+0x7d) [0x8098aee6d]
[ 7020.811] (EE) 5: /usr/local/llvm39/lib/libLLVM-3.9.so (_ZNSt3__16vectorIPN4llvm2cl14OptionCategoryENS_9allocatorIS4_EEE21__push_back_slow_pathIS4_EEvOT_+0x22f) [0x8098823cf]
[ 7020.815] (EE) 6: /usr/local/llvm39/lib/libLLVM-3.9.so (LLVMParseCommandLineOptions+0x1c2c) [0x80988063c]
[ 7020.819] (EE) 7: /usr/local/llvm39/lib/libLLVM-3.9.so (_ZN4llvm2cl6Option11addArgumentEv+0x7c) [0x80987434c]
[ 7020.822] (EE) 8: /usr/local/llvm36/lib/libLLVM-3.6.so (_ZN4llvm32createPPCTargetTransformInfoPassEPKNS_16PPCTargetMachineE+0xc12) [0x80e7f7b64]
[ 7020.826] (EE) 9: /usr/local/llvm36/lib/libLLVM-3.6.so (LLVMInitializeARMTargetInfo+0x112) [0x80e7fe9b4]
[ 7020.830] (EE) 10: /usr/local/llvm36/lib/libLLVM-3.6.so (_init+0xe) [0x80d82313c]
[ 7020.832] (EE) 11: ? (_rtld_is_dlopened+0x1ad7) [0x800809ec7]
[ 7020.835] (EE) 12: ? (dlopen+0x190) [0x800805280]
[ 7020.838] (EE) 13: /usr/local/lib/xorg/modules/extensions/libglx.so (_init+0x1e24b) [0x804849edb]
[ 7020.841] (EE) 14: /usr/local/lib/xorg/modules/extensions/libglx.so (_init+0x1d6ff) [0x80484880f]
[ 7020.844] (EE) 15: /usr/local/lib/xorg/modules/extensions/libglx.so (_init+0x1cd4e) [0x8048473ee]
[ 7020.847] (EE) 16: /usr/local/bin/X (InitExtensions+0x61) [0x4a7b91]
[ 7020.850] (EE) 17: /usr/local/bin/X (remove_fs_handlers+0x301) [0x439dd1]
[ 7020.853] (EE) 18: /usr/local/bin/X (_start+0x16f) [0x42501f]
[ 7020.856] (EE) 19: ? (?+0x16f) [0x80082456f]
[ 7020.856] (EE)
[ 7020.856] (EE) Segmentation fault at address 0x0
[ 7020.856] (EE)
Fatal server error:
[ 7020.856] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 7020.856] (EE)
[ 7020.856] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 7020.856] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 7020.856] (EE)
[ 7020.856] scfb: LeaveVT 0
[ 7020.856] (EE) Server terminated with error (1). Closing log file.
More information about the freebsd-x11
mailing list