Testing the new i915 driver (855GM)
- -
andreas at braml.org
Sun Oct 18 01:13:21 UTC 2015
Hi!
Today I tried my luck with the new i915 driver following the instructions on
https://wiki.freebsd.org/Graphics/Update%20i915%20GPU%20driver%20to%20Linux%203.8
I updated the whole system from 10.1-RELEASE to -CURRENT about 3 weeks
ago, including a full port rebuild followed by make delete-old[-libs]. So this
should
be clean enough for testing. The only basic thing I had to change was putting
hint.agp.N.disable=1 in /boot/loader.conf (with N either 0 or 1). Otherwise I
get a panic
when agp loads. This used to work in 10.1-RELEASE. Since this machine is quite
dated,
I haven't found the strength to do a bisect to find the culprit. I decided to
better wait until
after I passed the differential equations test next month before I embark on
that journey. :)
Now for my test with the updated i915kms:
- kldload'ing i915kms works (well, at least it doesn't panic as it does on
CURRENT head)
- trying to startx with the xorg.conf I used on 10.1 RELEASE leads to a panic
Find attached:
* dmesg output
* xorg.conf
* core.txt of the panic
If you need additional logs or want me to try something else, just ask.
Thanks for your continuous work on this, Jean-Sébastien!
Bye,
Andreas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: core.txt.4
Type: application/octet-stream
Size: 138213 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20151018/a5a67d6a/attachment.obj>
-------------- next part --------------
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 3820047(drm-i915-update-38): Sat Oct 17 20:09:30 CEST 2015
root at marnie.dom.braml.org:/usr/obj/usr/home/andi/freebsd-base-graphics/sys/GENERIC i386
FreeBSD clang version 3.6.1 (tags/RELEASE_361/final 237755) 20150525
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) M processor 1500MHz (1499.86-MHz 686-class CPU)
Origin="GenuineIntel" Id=0x695 Family=0x6 Model=0x9 Stepping=5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 536870912 (512 MB)
avail memory = 473137152 (451 MB)
random: unblocking device.
random: entropy device external interface
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc10d6860, 0) error 19
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD Montara> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 11 at device 2.0 on pci0
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 16252k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 10 at device 29.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff irq 11 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xe0200000-0xe0200fff irq 10 at device 1.0 on pci1
cbb0: <RF5C476 PCI-CardBus Bridge> irq 11 at device 3.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> irq 10 at device 3.1 on pci1
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci1: <serial bus, FireWire> at device 3.2 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xe0201800-0xe02018ff irq 10 at device 5.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:ca:c4:40:84
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 10 at device 31.5 on pci0
pcm0: <Avance Logic ALC202 AC97 Codec>
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcd7ff,0xdb800-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: current setting not found in table
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ata1: timeout waiting for read DRQ
(aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata1:0:1:0): CAM status: CCB request completed with an error
(aprobe0:ata1:0:1:0): Retrying command
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
(aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata1:0:1:0): CAM status: Command timeout
(aprobe0:ata1:0:1:0): Error 5, Retries exhausted
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <IC25N040ATMR04-0 MO2OAD4A> ATA-6 device
ada0: Serial Number MRG277KBG0X8RH
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 38154MB (78140160 512 byte sectors: 16H 63S/T 16383C)
ata1: timeout waiting for read DRQ
(aprobe1:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe1:ata1:0:1:0): CAM status: CCB request completed with an error
(aprobe1:ata1:0:1:0): Retrying command
ata1: timeout waiting for read DRQ
(aprobe1:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe1:ata1:0:1:0): CAM status: CCB request completed with an error
(aprobe1:ata1:0:1:0): Error 5, Retries exhausted
ada0: Previously was known as ad0
Timecounter "TSC" frequency 1499861754 Hz quality 800
WARNING: WITNESS option enabled, expect reduced performance.
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QSI DVD+-RW SDW-082 LX32> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ada0p2 [rw]...
WARNING: / was not properly dismounted
rl0: link state changed to UP
tun0: link state changed to UP
WARNING: attempt to domain_add(netgraph) after domainfinalize()
rl0: link state changed to DOWN
lock order reversal:
1st 0xc4adfd20 bufwait (bufwait) @ /usr/home/andi/freebsd-base-graphics/sys/kern/vfs_bio.c:3344
2nd 0xc58f0a00 dirhash (dirhash) @ /usr/home/andi/freebsd-base-graphics/sys/ufs/ufs/ufs_dirhash.c:281
KDB: stack backtrace:
db_trace_self_wrapper(c1545960,7379732f,7366752f,7366752f,7366752f,...) at db_trace_self_wrapper+0x2a/frame 0xda282720
kdb_backtrace(c154977c,c58f0a00,c1584a0a,c4da8fa8,c1584639,...) at kdb_backtrace+0x2d/frame 0xda282788
witness_checkorder(c58f0a00,9,c1584639,119,0,...) at witness_checkorder+0xd6e/frame 0xda2827dc
_sx_xlock(c58f0a00,0,c1584639,119,0,...) at _sx_xlock+0x74/frame 0xda28280c
ufsdirhash_add(c5b228e8,da282958,55b4,da282898,da28289c,...) at ufsdirhash_add+0x37/frame 0xda282840
ufs_direnter(c5b27d50,c5b279fc,da282958,da282b3c,c4ae05ac,...) at ufs_direnter+0x654/frame 0xda2828c8
ufs_mkdir(da282bd8,c1801ffc,c5b27d50,da282bd4,10,...) at ufs_mkdir+0x7ec/frame 0xda282a74
VOP_MKDIR_APV(c17ed810,da282bd8,da282b3c,da282b68,28412000,...) at VOP_MKDIR_APV+0xfe/frame 0xda282aa0
kern_mkdirat(c55279c0,ffffff9c,28412000,0,1c0) at kern_mkdirat+0x23a/frame 0xda282bfc
sys_mkdir(c55279c0,da282ca8,c1538a7e,4,c1a497d4,...) at sys_mkdir+0x31/frame 0xda282c18
syscall(da282ce8) at syscall+0x3b5/frame 0xda282cdc
Xint0x80_syscall() at Xint0x80_syscall+0x2c/frame 0xda282cdc
--- syscall (136, FreeBSD ELF32, sys_mkdir), eip = 0x28198867, esp = 0xbfbfe924, ebp = 0xbfbfedd0 ---
rl0: link state changed to UP
ng_pppoe[3]: no matching session
ng_pppoe[3]: no matching session
ng_pppoe[3]: no matching session
ng_pppoe[3]: no matching session
ng_pppoe[3]: no matching session
ng_pppoe[3]: no matching session
info: [drm] Initialized drm 1.1.0 20060810
[drm:pid822:drm_probe_helper] drmn0 desc: Intel i852GM/i855GM GMCH
drmn0: <Intel i852GM/i855GM GMCH> on vgapci0
[drm:pid822:drm_get_pci_dev]
[drm:pid822:drm_ctxbitmap_next] bit : 0
[drm:pid822:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm:pid822:drm_get_minor]
[drm:pid822:drm_get_minor] new minor assigned 64
[drm:pid822:drm_get_minor]
[drm:pid822:drm_get_minor] new minor assigned 0
[drm:KMS:pid822:i915_dump_device_info] i915 device info: gen=2, pciid=0x3582 flags=is_mobile,is_i85x,cursor_needs_physical,has_overlay,overlay_needs_physical,[drm:pid822:drm_addmap_core] offset = 0xe0000000, size = 0x00080000, type = 1
iicbus0: <Philips I2C bus> on iicbb0 addr 0xda
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xda
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xda
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xda
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xda
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xda
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
[drm:pid822:intel_opregion_setup] graphic opregion physical addr: 0x0
[drm:pid822:intel_opregion_setup] ACPI OpRegion not supported!
[drm:pid822:drm_pci_enable_msi] MSI count = 0
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid822:init_vbt_defaults] Set default to SSC at 66MHz
[drm:KMS:pid822:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 48 display_clock_mode 0 fdi_rx_polarity_inverted 0
[drm:KMS:pid822:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid822:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid822:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[drm:KMS:pid822:parse_lfp_panel_data] VBT initial LVDS value 40000300
[drm:KMS:pid822:parse_sdvo_device_mapping] different child size is found. Invalid.
[drm:KMS:pid822:parse_device_mapping] different child size is found. Invalid.
[drm:KMS:pid822:intel_modeset_init] 2 display pipes available.
[drm:KMS:pid822:intel_modeset_init] plane 0 init failed: -19
[drm:KMS:pid822:intel_modeset_init] plane 1 init failed: -19
[drm:KMS:pid822:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation
[drm:KMS:pid822:intel_lvds_init] using preferred mode from EDID: [drm:KMS:pid822:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:KMS:pid822:intel_panel_get_backlight] get backlight PWM = 0
[drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1)
[drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956
[drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0076 r(1)
[drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956
[drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -984386803
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus ssc] NAK for addr: 0002 r(0)
[drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -984386804
[drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1)
[drm:KMS:pid822:tfp410_init] tfp410 not detected got VID FFFFFFFF: from iicbus9 Slave 56.
[drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956
[drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0075 r(1)
[drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956
[drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1)
[drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956
drmn0: taking over the fictitious range 0xe8000000-0xf0000000
info: [drm] initialized overlay support
[drm:KMS:pid822:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled
[drm:KMS:pid822:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled
[drm:KMS:pid822:intel_modeset_setup_hw_state] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1
[drm:KMS:pid822:intel_modeset_setup_hw_state] [ENCODER:12:DAC-12] hw state readout: disabled, pipe=0
[drm:KMS:pid822:intel_modeset_setup_hw_state] [CONNECTOR:5:LVDS-1] hw state readout: enabled
[drm:KMS:pid822:intel_modeset_setup_hw_state] [CONNECTOR:11:VGA-1] hw state readout: disabled
[drm:pid822:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode.
[drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42
[drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42
[drm:KMS:pid822:i9xx_update_wm] FIFO watermarks - A: 40, B: 40
[drm:KMS:pid822:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1
[drm:KMS:pid822:intel_sanitize_crtc] [CRTC:3] hw state adjusted, was enabled, now disabled
[drm:KMS:pid822:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:KMS:pid822:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:KMS:pid822:intel_modeset_check_state] [ENCODER:12:DAC-12]
[drm:KMS:pid822:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid822:intel_modeset_check_state] [CRTC:4]
[drm:pid822:drm_irq_install] irq=11
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.LVDS-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid822:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:KMS:pid822:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:KMS:pid822:drm_mode_debug_printmodeline] Modeline 13:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:KMS:pid822:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1]
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid822:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:KMS:pid822:intel_get_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[drm:KMS:pid822:intel_get_load_detect_pipe] creating tmp fb for load-detection
[drm:KMS:pid822:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:KMS:pid822:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid822:drm_vblank_get] enabling vblank on crtc 0, ret: -22
[drm:KMS:pid822:i9xx_crtc_mode_set] Mode for pipe A:
[drm:KMS:pid822:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
[drm:KMS:pid822:i9xx_update_plane] Writing base 00020000 00000000 0 0 2560
[drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42
[drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42
[drm:KMS:pid822:i9xx_update_wm] FIFO watermarks - A: 40, B: 40
[drm:KMS:pid822:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1
[drm:KMS:pid822:intel_crtc_mode_set] [ENCODER:12:DAC-12] set [MODE:0:640x480]
[drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42
[drm:KMS:pid822:intel_calculate_wm] FIFO entries required for mode: 20
[drm:KMS:pid822:intel_calculate_wm] FIFO watermark level: 20
[drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42
[drm:KMS:pid822:i9xx_update_wm] FIFO watermarks - A: 20, B: 40
[drm:KMS:pid822:i9xx_update_wm] Setting FIFO watermarks - A: 20, B: 40, C: 2, SR 1
[drm:pid822:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 832, vtotal 520, vdisplay 480
[drm:pid822:drm_calc_timestamping_constants] crtc 3: clock 31500 kHz framedur 13734240 linedur 26412, pixeldur 31
[drm:KMS:pid822:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:KMS:pid822:intel_connector_check_state] [CONNECTOR:11:VGA-1]
[drm:KMS:pid822:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:KMS:pid822:intel_modeset_check_state] [ENCODER:12:DAC-12]
[drm:KMS:pid822:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid822:intel_modeset_check_state] [CRTC:4]
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid822:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:KMS:pid822:intel_crt_load_detect] starting load-detect on CRT
[drm:KMS:pid822:intel_release_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12]
[drm:KMS:pid822:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[drm:pid822:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 5 p(0,0)@ 138.135841 -> 138.135841 [e 0 us, 0 rep]
[drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42
[drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42
[drm:KMS:pid822:i9xx_update_wm] FIFO watermarks - A: 40, B: 40
[drm:KMS:pid822:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1
[drm:KMS:pid822:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:KMS:pid822:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:KMS:pid822:intel_modeset_check_state] [ENCODER:12:DAC-12]
[drm:KMS:pid822:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid822:intel_modeset_check_state] [CRTC:4]
[drm:KMS:pid822:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] disconnected
[drm:KMS:pid822:drm_setup_crtcs]
[drm:KMS:pid822:drm_enable_connectors] connector 5 enabled? yes
[drm:KMS:pid822:drm_enable_connectors] connector 11 enabled? no
[drm:KMS:pid822:drm_target_preferred] looking for cmdline mode on connector 5
[drm:KMS:pid822:drm_target_preferred] looking for preferred mode on connector 5
[drm:KMS:pid822:drm_target_preferred] found mode 1024x768
[drm:KMS:pid822:drm_setup_crtcs] picking CRTCs for 2048x2048 config
[drm:KMS:pid822:drm_setup_crtcs] desired mode 1024x768 set on crtc 4
[drm:KMS:pid822:intelfb_create] allocated 1024x768 (s 24bits) fb: 0x00020000, bo 0xc5225200
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:4]
[drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode.
[drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42
[drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42
[drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 40
[drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1
[drm:pid0:drm_vblank_get] enabling vblank on crtc 1, ret: -22
[drm:KMS:pid0:i9xx_crtc_mode_set] Mode for pipe B:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:KMS:pid0:i9xx_update_plane] Writing base 00020000 00000000 0 0 4096
[drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42
[drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42
[drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 40
[drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1
[drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:6:LVDS-6] set [MODE:8:1024x768]
[drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42
[drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42
[drm:KMS:pid0:intel_calculate_wm] FIFO entries required for mode: 41
[drm:KMS:pid0:intel_calculate_wm] FIFO watermark level: -1
[drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 1
[drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1
[drm:KMS:pid0:intel_enable_lvds] applying panel-fitter: 8, 0
warning: [drm] fixme: max PWM is zero
[drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 1
[drm:pid0:drm_calc_timestamping_constants] crtc 4: hwmode: htotal 1344, vtotal 806, vdisplay 768
[drm:pid0:drm_calc_timestamping_constants] crtc 4: clock 65000 kHz framedur 16664856 linedur 20676, pixeldur 15
[drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:12:DAC-12]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:4]
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:KMS:pid0:output_poll_execute] [CONNECTOR:11:VGA-1] status updated from 2 to 2
-------------- next part --------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "off"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF/"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
FontPath "/usr/local/lib/X11/fonts/dejavu/"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "dri"
Load "dri2"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
More information about the freebsd-x11
mailing list