[REPORT] AMD Radeon KMS on Asus X501U
Гуляев Гоша
gosha-necr at yandex.ru
Sat Aug 31 12:24:32 UTC 2013
31.08.2013, 16:19, "Niclas Zeising" <zeising+freebsd at daemonic.se>:
On 08/31/13 05:55, Гуляев Гоша wrote:
30.08.2013, 23:54, "Niclas Zeising"
<[1]zeising+freebsd at daemonic.se>:
Currently you need to use clang to compile libGL and dri from the
xorg
development repo. This is because our gcc is so old it lacks certain
functions needed to compile these ports.
A fix is in the works, but will probably take a couple of days (at
least) before it is out.
Yes, it helps!
I'm rebuild system with clang and after that graphics/dri installs.
Other info about system (pciconf -lvbce, devinfo, dmesg , etc.. in
my first letter
[SNIP xorg log]
Hi!
Do you have serial console to the machine?
The trouble might be that the radeon KMS kernel module isn't loaded
properly. Does the console come back once X exits? Can you post
kldstat before and after starting X, as well as dmesg?
Regards!
--
Niclas
No, I have not serial console (if it means that on notebook needed
COM-post, it has not nor COM, not LPT ports)
After Xorg exits, physical console come back normaly
Also I send kernel config in the end of letter
============= kldstat before Xorg ======================
Id Refs Address Size Name
1 1 0xffffffff80200000 b9cf08 kernel
============= kldstat after Xorg ======================
Id Refs Address Size Name
1 21 0xffffffff80200000 b9cf08 kernel
2 1 0xffffffff80e12000 10308e radeonkms.ko
3 1 0xffffffff80f16000 3e503 drm2.ko
4 4 0xffffffff80f55000 140a iicbus.ko
5 1 0xffffffff80f57000 ce0 iic.ko
6 1 0xffffffff80f58000 12d9 iicbb.ko
============ dmesg before Xorg =======================
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0: Sat Aug 31 08:03:00 CET 2013
goshanecr at TEST:/usr/obj/usr/src/sys/BSDSERV amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD E-450 APU with Radeon(tm) HD Graphics (1647.04-MHz K8-class
CPU)
Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2
Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SK
INIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 1634627584 (1558 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero
address or length: 0x0000000000000000/0x1 (20130823/tbfadt-630)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x3, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem
0xb0000000-0xbfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on
pci0
hdac0: <ATI (0x1314) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 19
at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeb48000-0xfeb49fff
irq 18 at device 16.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
usbus0 on xhci0
ahci0: <AMD Hudson-2 AHCI SATA controller> port
0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f
mem 0xfeb4f000-0xfeb4f7ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xfeb4e000-0xfeb4efff irq 18
at device 18.0 on pci0
usbus1 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff
irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18
at device 19.0 on pci0
usbus3 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfeb4b000-0xfeb4b0ff
irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <AMD ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f at device 20.1 on
pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xfeb40000-0xfeb43fff
irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <PCI-PCI bridge> at device 20.4 on pci0
pci2: <PCI bus> on pcib2
sdhci_pci0: <Generic SD HCI> mem 0xfeb4a000-0xfeb4a0ff irq 16 at device
20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci6: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0xd000-0xd0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at
device 0.0 on pci6
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on
miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 30:85:a9:7a:08:93
pcib5: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci7: <ACPI PCI bus> on pcib5
ath0: <Atheros AR9485> mem 0xfe900000-0xfe97ffff irq 19 at device 0.0
on pci7
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC270 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC270 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC270 (Internal Analog)> at nid 20 and 25 on hdaa1
pcm2: <Realtek ALC270 (Right Analog Headphones)> at nid 26 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen1.1: <AMD> at usbus1
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022> at usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
usbus0
ugen4.1: <AMD> at usbus4
uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <AMD> at usbus3
uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <AMD> at usbus2
uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
ugen4.2: <Azurewave> at usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST320LT020-9YG142 0001SDM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1647041208 Hz quality 800
ugen3.2: <Atheros Communications> at usbus3
Trying to mount root from ufs:/dev/ada0a [rw]...
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
======== dmesg after Xorg ======================
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0: Sat Aug 31 08:03:00 CET 2013
goshanecr at TEST:/usr/obj/usr/src/sys/BSDSERV amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD E-450 APU with Radeon(tm) HD Graphics (1647.04-MHz K8-class
CPU)
Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2
Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SK
INIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 1634627584 (1558 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero
address or length: 0x0000000000000000/0x1 (20130823/tbfadt-630)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x3, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem
0xb0000000-0xbfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on
pci0
hdac0: <ATI (0x1314) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 19
at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeb48000-0xfeb49fff
irq 18 at device 16.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
usbus0 on xhci0
ahci0: <AMD Hudson-2 AHCI SATA controller> port
0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f
mem 0xfeb4f000-0xfeb4f7ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xfeb4e000-0xfeb4efff irq 18
at device 18.0 on pci0
usbus1 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff
irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18
at device 19.0 on pci0
usbus3 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfeb4b000-0xfeb4b0ff
irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <AMD ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f at device 20.1 on
pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xfeb40000-0xfeb43fff
irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <PCI-PCI bridge> at device 20.4 on pci0
pci2: <PCI bus> on pcib2
sdhci_pci0: <Generic SD HCI> mem 0xfeb4a000-0xfeb4a0ff irq 16 at device
20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci6: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0xd000-0xd0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at
device 0.0 on pci6
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on
miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 30:85:a9:7a:08:93
pcib5: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci7: <ACPI PCI bus> on pcib5
ath0: <Atheros AR9485> mem 0xfe900000-0xfe97ffff irq 19 at device 0.0
on pci7
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC270 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC270 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC270 (Internal Analog)> at nid 20 and 25 on hdaa1
pcm2: <Realtek ALC270 (Right Analog Headphones)> at nid 26 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen1.1: <AMD> at usbus1
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022> at usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
usbus0
ugen4.1: <AMD> at usbus4
uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <AMD> at usbus3
uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <AMD> at usbus2
uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
ugen4.2: <Azurewave> at usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST320LT020-9YG142 0001SDM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1647041208 Hz quality 800
ugen3.2: <Atheros Communications> at usbus3
Trying to mount root from ufs:/dev/ada0a [rw]...
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Wrestler [Radeon HD 6320]> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (PALM 0x1002:0x9806
0x1043:0x14B7).
info: [drm] register mmio base: 0xFEB00000
info: [drm] register mmio size: 262144
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: IGP card detected, skipping this
method...
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table:
AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xb0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800b0000000
(262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x2070
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xb0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800b0000000
(262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x2070
error: [drm:pid905:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
drmn0: error: Fatal error during GPU init
info: [drm] radeon: finishing device.
[TTM] Memory type 2 has not been initialized
device_attach: drmn0 attach returned 22
============= KERNEL config =====================
cpu HAMMER
ident BSDSERV
#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
#makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options TCP_OFFLOAD # TCP offload
#options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options QUOTA # Enable disk quotas for UFS
options MD_ROOT # MD is a potential root device
#options NFSCL # New Network Filesystem Client
#options NFSD # New Network Filesystem Server
#options NFSLOCKD # Network Lock Manager
#options NFS_ROOT # NFS usable as /, requires NFSCL
#options MSDOSFS # MSDOS Filesystem
#options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_RAID # Soft RAID functionality.
options GEOM_LABEL # Provides labelization
options COMPAT_FREEBSD32 # Compatible with i386 binaries
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being
interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options CAPABILITY_MODE # Capsicum capability mode
options CAPABILITIES # Capsicum capabilities
options MAC # TrustedBSD MAC Framework
options KDTRACE_FRAME # Ensure frames are compiled in
options KDTRACE_HOOKS # Kernel DTrace hooks
options DDB_CTF # Kernel ELF linker loads CTF data
options INCLUDE_CONFIG_FILE # Include this file in kernel
# Debugging support. Always need this:
options KDB # Enable kernel debugger support.
# For minimum debugger support (stable branch) use:
#options KDB_TRACE # Print a stack trace for a panic.
# For full debugger support use this instead:
options DDB # Support DDB.
options GDB # Support remote GDB.
#options DEADLKRES # Enable the deadlock resolver
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal
structures, required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device pci
# Floppy drives
#device fdc
# ATA controllers
device ahci # AHCI-compatible SATA controllers
device ata # Legacy ATA/SATA controllers
options ATA_STATIC_ID # Static device numbering
#device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
#device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA
# SCSI Controllers
#device ahc # AHA2940 and onboard AIC7xxx devices
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
#device esp # AMD Am53C974 (Tekram DC-390(T))
#device hptiop # Highpoint RocketRaid 3xxx series
#device isp # Qlogic family
##device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device mps # LSI-Logic MPT-Fusion 2
##device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device isci # Intel C600 SAS controller
# ATA/SCSI peripherals
device scbus # SCSI bus (required for ATA/SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
device pass # Passthrough device (direct ATA/SCSI access)
#device ses # Enclosure Services (SES and SAF-TE)
#device ctl # CAM Target Layer
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#XXX it is not 64-bit clean, -scottl
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device hptnr # Highpoint DC7280, R750
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device hpt27xx # Highpoint RocketRAID 27xx
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID
#device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device aacraid # Adaptec by PMC RAID
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#XXX pointer/int warnings
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
options VESA # Add support for VESA BIOS Extensions (VBE)
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
options SC_PIXEL_MODE # add support for the raster text mode
device agp # support several AGP chipsets
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
#device uart # Generic UART driver
# Parallel port
#device ppc
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
#device puc # Multi I/O cards and multi-channel UARTs
# PCI Ethernet NICs.
#device bxe # Broadcom BCM57710/BCM57711/BCM57711E 10Gb Ethernet
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 Gigabit Ethernet Family
#device igb # Intel PRO/1000 PCIE Server Gigabit Family
#device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
#device le # AMD Am7900 LANCE and Am79C9xx PCnet
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device miibus # MII bus support
#device ae # Attansic/Atheros L2 FastEthernet
#device age # Attansic/Atheros L1 Gigabit Ethernet
#device alc # Atheros AR8131/AR8132 Ethernet
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn
#device dc # DEC/Intel 21143 and various workalikes
#device et # Agere ET1310 10/100/Gigabit Ethernet
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device gem # Sun GEM/Sun ERI/Apple GMAC
#device hme # Sun HME (Happy Meal Ethernet)
#device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nfe # nVidia nForce MCP on-board Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
##device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sge # Silicon Integrated Systems SiS190/191
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
#device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros NICs
device ath_pci # Atheros pci/cardbus glue
device ath_hal # pci/cardbus chip support
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation
options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later
device ath_rate_sample # SampleRate tx rate control for ath
#device bwi # Broadcom BCM430x/BCM431x wireless NICs.
#device bwn # Broadcom BCM43xx wireless NICs.
#device ipw # Intel 2100 wireless NICs.
#device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs.
#device iwn # Intel 4965/1000/5000/6000 wireless NICs.
#device malo # Marvell Libertas wireless NICs.
#device mwl # Marvell 88W8363 802.11n wireless NICs.
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wpi # Intel 3945ABG wireless NICs.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
#options PADLOCK_RNG # VIA Padlock RNG
#options RDRAND_RNG # Intel Bull Mountain RNG
device ether # Ethernet support
device vlan # 802.1Q VLAN support
device tun # Packet tunnel.
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
options USB_DEBUG # enable debug msgs
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device xhci # XHCI PCI->USB interface (USB 3.0)
device usb # USB Bus (required)
device ukbd # Keyboard
device umass # Disks/Mass storage - Requires scbus and da
# Sound support
device sound # Generic sound driver (required)
device snd_cmi # CMedia CMI8338/CMI8738
device snd_csa # Crystal Semiconductor CS461x/428x
device snd_emu10kx # Creative SoundBlaster Live! and Audigy
device snd_es137x # Ensoniq AudioPCI ES137x
device snd_hda # Intel High Definition Audio
device snd_ich # Intel, NVidia and other ICH AC'97 Audio
device snd_via8233 # VIA VT8233x Audio
# MMC/SD
device mmc # MMC/SD bus
device mmcsd # MMC/SD memory card
device sdhci # Generic PCI SD Host Controller
# VirtIO support
#device virtio # Generic VirtIO bus (required)
#device virtio_pci # VirtIO PCI device
#device vtnet # VirtIO Ethernet device
#device virtio_blk # VirtIO Block device
#device virtio_scsi # VirtIO SCSI device
#device virtio_balloon # VirtIO Memory Balloon device
--------------------------------------------
С уважением, Гуляев Гоша.
References
1. mailto:zeising+freebsd at daemonic.se
More information about the freebsd-x11
mailing list