Intel HD 2500 display corruption
Alex Zepeda
alex at inferiorhumanorgans.com
Sun Nov 11 06:30:26 UTC 2012
Motherboard: Gigabyte Z77M-D3H-MVP
CPU: i5-3570
RAM: 32GB
Display: Dell U2410 via DVI cable/port
FreeBSD 8.3 (amd64):
The VESA driver worked somewhat. Display corruption and inability to
restart the X server were the big problems.
FreeBSD 9.1-RC2 (amd64):
Intel driver worked, but display corruption was still an issue. If I
tried to play a video, I'd get a GPU hanged, acceleration disabled
message and then the display corruption would vanish (video wouldn't
play, however).
FreeBSD 9.1-RC3 (amd64):
Significant display corruption. Display is unusable, videos play
(presumably with xvideo) with significant corruption.
Ubuntu 12.10 live CD (amd64):
Accelerated 2D graphics work perfectly with no noticeable corruption.
Installed software:
# portversion -v -L =
dri-7.11.2_2,2 > succeeds port (port has 7.6.1_2,2)
libGL-7.11.2_2 > succeeds port (port has 7.6.1_2)
libGLU-7.11.2_1 > succeeds port (port has 7.6.1_1)
libdrm-2.4.31_1 > succeeds port (port has 2.4.17_1)
mplayer2-2.0.20120517_1 < needs updating (port has 2.0.20121103)
ruby-1.9.3,1 < needs updating (port has 1.9.3.327,1)
xf86-video-intel-2.17.0_1 > succeeds port (port has 2.7.1_4)
xorg-server-1.10.6_1,1 > succeeds port (port has 1.7.7_6,1)
Attached are:
dmesg.out: The dmesg output from a 9.1-RC3 kernel after running kenv
drm.debug=2.
gpu_error_state.txt: An abbreviated output of i915_error_state from the
RC2 kernel.
pciconf.txt: The output of pciconf -lvb
- alex
-------------- next part --------------
Trying to mount root from zfs:zroot []...
drmn0: <Intel IvyBridge> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xe0000000 256MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid1275:intel_detect_pch] Found PatherPoint PCH
[drm:KMS:pid1275:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid1275:intel_parse_bios] Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd
[drm:KMS:pid1275:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0
[drm:KMS:pid1275:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid1275:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[drm:KMS:pid1275:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid1275:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid1275:intel_init_display] Using MT version of forcewake
[drm:KMS:pid1275:intel_modeset_init] 3 display pipes available.
[drm:KMS:pid1275:intel_lvds_init] LVDS is not present in VBT
[drm:KMS:pid1275:intel_crt_init] pch crt adpa set to 0xf40000
[drm:KMS:pid1275:intel_setup_outputs] HDMIB 1 PCH_DP_B 1 HDMIC 0 HDMID 1 PCH_DP_C 0 PCH_DP_D 1 LVDS 0
[drm:KMS:pid1275:intel_sdvo_read_byte] i2c transfer returned 2
[drm:KMS:pid1275:intel_sdvo_init] No SDVO device found on SDVOB
[drm:KMS:pid1275:intel_dp_i2c_init] i2c_init DPDDC-B
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1275:intel_dp_i2c_init] i2c_init DPDDC-D
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1275:ironlake_crtc_dpms] crtc 0/0 dpms off
[drm:KMS:pid1275:intel_update_fbc]
[drm:KMS:pid1275:ironlake_crtc_dpms] crtc 1/1 dpms off
[drm:KMS:pid1275:intel_update_fbc]
[drm:KMS:pid1275:ironlake_crtc_dpms] crtc 2/2 dpms off
[drm:KMS:pid1275:intel_update_fbc]
[drm:KMS:pid1275:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:KMS:pid1275:ironlake_init_pch_refclk] Disabling SSC entirely
drmn0: taking over the fictitious range 0xe0000000-0xf0000000
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:KMS:pid1275:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[drm:KMS:pid1275:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid1275:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
[drm:KMS:pid1275:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] probed modes :
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 33:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 22:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1] disconnected
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2]
info: [drm] GMBUS timed out, falling back to bit banging on pin 7 [gmbus bus dpd]
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid1275:intel_hdmi_detect] [CONNECTOR:18:HDMI-A-2] got no edid, ddc port 7
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2] disconnected
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
[drm:KMS:pid1275:drm_setup_crtcs]
[drm:KMS:pid1275:drm_enable_connectors] connector 9 enabled? no
[drm:KMS:pid1275:drm_enable_connectors] connector 12 enabled? yes
[drm:KMS:pid1275:drm_enable_connectors] connector 15 enabled? no
[drm:KMS:pid1275:drm_enable_connectors] connector 18 enabled? no
[drm:KMS:pid1275:drm_enable_connectors] connector 19 enabled? no
[drm:KMS:pid1275:drm_target_preferred] looking for cmdline mode on connector 12
[drm:KMS:pid1275:drm_target_preferred] looking for preferred mode on connector 12
[drm:KMS:pid1275:drm_target_preferred] found mode 1920x1200
[drm:KMS:pid1275:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:KMS:pid1275:drm_setup_crtcs] desired mode 1920x1200 set on crtc 3
[drm:KMS:pid1275:intelfb_create] allocated 1920x1200 fb: 0x00064000, bo 0xfffffe01314f8600
info: [drm] Initialized i915 1.6.0 20080730
[drm:KMS:pid1275:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
[drm:KMS:pid1275:drm_mode_getresources] [CRTC:3]
[drm:KMS:pid1275:drm_mode_getresources] [CRTC:5]
[drm:KMS:pid1275:drm_mode_getresources] [CRTC:7]
[drm:KMS:pid1275:drm_mode_getresources] [ENCODER:10:DAC-10]
[drm:KMS:pid1275:drm_mode_getresources] [ENCODER:11:TMDS-11]
[drm:KMS:pid1275:drm_mode_getresources] [ENCODER:16:TMDS-16]
[drm:KMS:pid1275:drm_mode_getresources] [ENCODER:17:TMDS-17]
[drm:KMS:pid1275:drm_mode_getresources] [ENCODER:20:TMDS-20]
[drm:KMS:pid1275:drm_mode_getresources] [CONNECTOR:9:VGA-1]
[drm:KMS:pid1275:drm_mode_getresources] [CONNECTOR:12:HDMI-A-1]
[drm:KMS:pid1275:drm_mode_getresources] [CONNECTOR:15:DP-1]
[drm:KMS:pid1275:drm_mode_getresources] [CONNECTOR:18:HDMI-A-2]
[drm:KMS:pid1275:drm_mode_getresources] [CONNECTOR:19:DP-2]
[drm:KMS:pid1275:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:KMS:pid1275:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid1275:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:KMS:pid1275:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid1275:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:12:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
[drm:KMS:pid1275:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] probed modes :
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 22:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 33:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:12:?]
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:15:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:15:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:18:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2]
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid1275:intel_hdmi_detect] [CONNECTOR:18:HDMI-A-2] got no edid, ddc port 7
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:18:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2]
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid1275:intel_hdmi_detect] [CONNECTOR:18:HDMI-A-2] got no edid, ddc port 7
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:19:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:19:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:KMS:pid1275:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid1275:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:KMS:pid1275:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid1275:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:12:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
[drm:KMS:pid1275:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] probed modes :
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 33:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 22:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:12:?]
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:15:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:15:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:18:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2]
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid1275:intel_hdmi_detect] [CONNECTOR:18:HDMI-A-2] got no edid, ddc port 7
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:18:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2]
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid1275:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid1275:intel_hdmi_detect] [CONNECTOR:18:HDMI-A-2] got no edid, ddc port 7
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-2] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:19:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
[drm:KMS:pid1275:drm_mode_getconnector] [CONNECTOR:19:?]
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1275:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
[drm:KMS:pid1275:drm_mode_addfb] [FB:36]
[drm:KMS:pid1275:drm_mode_setcrtc] [CRTC:3]
[drm:KMS:pid1275:drm_mode_setcrtc] [CONNECTOR:12:HDMI-A-1]
[drm:KMS:pid1275:drm_crtc_helper_set_config]
[drm:KMS:pid1275:drm_crtc_helper_set_config] [CRTC:3] [FB:36] #connectors=1 (x y) (0 0)
[drm:KMS:pid1275:drm_crtc_helper_set_config] crtc has no fb, full mode set
[drm:KMS:pid1275:drm_crtc_helper_set_config] modes are different, full mode set
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 37:"1920x1200" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
[drm:KMS:pid1275:drm_crtc_helper_set_config] encoder changed, full mode switch
[drm:KMS:pid1275:drm_crtc_helper_set_config] crtc changed, full mode switch
[drm:KMS:pid1275:drm_crtc_helper_set_config] [CONNECTOR:12:HDMI-A-1] to [CRTC:3]
[drm:KMS:pid1275:drm_crtc_helper_set_config] attempting to set mode from userspace
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 37:"1920x1200" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
[drm:KMS:pid1275:drm_crtc_helper_set_mode] [CRTC:3]
[drm:KMS:pid1275:intel_choose_pipe_bpp_dither] forcing bpc to 8 for HDMI
[drm:KMS:pid1275:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 8)
[drm:KMS:pid1275:ironlake_crtc_mode_set] Mode for pipe 0:
[drm:KMS:pid1275:drm_mode_debug_printmodeline] Modeline 37:"1920x1200" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
[drm:KMS:pid1275:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid1275:ironlake_update_plane] Writing base 0092E000 00000000 0 0 7680
[drm:KMS:pid1275:intel_update_fbc]
[drm:KMS:pid1275:sandybridge_update_wm] FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:KMS:pid1275:ironlake_check_srwm] watermark 1: display plane 22, fbc lines 3, cursor 6
[drm:KMS:pid1275:ironlake_check_srwm] watermark 2: display plane 79, fbc lines 3, cursor 6
[drm:KMS:pid1275:ironlake_check_srwm] watermark 3: display plane 156, fbc lines 4, cursor 10
[drm:KMS:pid1275:drm_crtc_helper_set_mode] [ENCODER:11:TMDS-11] set [MODE:37:1920x1200]
[drm:KMS:pid1275:sandybridge_update_wm] FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:KMS:pid1275:ironlake_check_srwm] watermark 1: display plane 22, fbc lines 3, cursor 6
[drm:KMS:pid1275:ironlake_check_srwm] watermark 2: display plane 79, fbc lines 3, cursor 6
[drm:KMS:pid1275:ironlake_check_srwm] watermark 3: display plane 156, fbc lines 4, cursor 10
[drm:KMS:pid1275:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid1275:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid1275:ivb_manual_fdi_link_train] FDI_RX_IIR 0x700
[drm:KMS:pid1275:ivb_manual_fdi_link_train] FDI train 1 done.
[drm:KMS:pid1275:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600
[drm:KMS:pid1275:ivb_manual_fdi_link_train] FDI train 2 done.
[drm:KMS:pid1275:ivb_manual_fdi_link_train] FDI train done.
[drm:KMS:pid1275:intel_update_fbc]
[drm:KMS:pid1275:drm_crtc_helper_set_config] Setting connector DPMS state to on
[drm:KMS:pid1275:drm_crtc_helper_set_config] [CONNECTOR:12:HDMI-A-1] set DPMS on
[drm:KMS:pid1275:intel_crtc_cursor_set]
[drm:KMS:pid1275:intel_crtc_cursor_set]
[drm:KMS:pid1275:intel_crtc_cursor_set] cursor off
[drm:KMS:pid1275:drm_crtc_helper_set_config]
[drm:KMS:pid1275:drm_crtc_helper_set_config] [CRTC:3] [NOFB]
[drm:KMS:pid1275:ironlake_crtc_dpms] crtc 0/0 dpms off
[drm:KMS:pid1275:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid1275:intel_update_fbc]
-------------- next part --------------
hw.dri.0.info.i915_error_state: Time: 1352442433 s 188203 us
PCI ID: 0x0152
EIR: 0x00000000
PGTBL_ER: 0x00000000
fence[0] = 132d03b0092e001
fence[1] = 23cb00f023a4001
fence[2] = 23fb007023e4001
fence[3] = 16f701f016e0001
fence[4] = 2ab500302ab1001
fence[5] = 3101003030f4001
fence[6] = 185901701846001
fence[7] = 184501701832001
fence[8] = 168e00f01683001
fence[9] = 169a00f0168f001
fence[10] = 169e0030169d001
fence[11] = 16b9003016ae001
fence[12] = 16db01f016c4001
fence[13] = 17c1003017b2001
fence[14] = 1831007017fa001
fence[15] = 185f0030185d001
ERROR: 0x00000000
DONE_REG: 0xffffffff
render command stream:
HEAD: 0x0060f1dc
TAIL: 0x0000f3e8
ACTHD: 0x0060f1dc
IPEIR: 0x00000000
IPEHR: 0x7a000003
INSTDONE: 0xffffffff
INSTDONE1: 0x00000000
BBADDR: 0x308e3048000010b
INSTPS: 0x8000010b
INSTPM: 0x00000080
FADDR: 0x000103c0
FAULT_REG: 0x00000000
SYNC_0: 0x00000000
SYNC_1: 0x000061e4
seqno: 0x000061e2
ring->head: 0x0001fe18
ring->tail: 0x0000f3e8
blt command stream:
HEAD: 0x0161a8c0
TAIL: 0x0001a9e0
ACTHD: 0x0161a8cc
IPEIR: 0x00000000
IPEHR: 0x0b140001
INSTDONE: 0xfffffffe
INSTPS: 0x00000000
INSTPM: 0x00000000
FADDR: 0x0005e8c0
FAULT_REG: 0x00000000
SYNC_0: 0x000061e2
SYNC_1: 0x00000000
seqno: 0x000061e4
ring->head: 0x0001fad0
ring->tail: 0x0001a9e0
bsd command stream:
HEAD: 0x00000000
TAIL: 0x00000000
ACTHD: 0x00000000
IPEIR: 0x00000000
IPEHR: 0x00000000
INSTDONE: 0xfffffffe
INSTPS: 0x00000000
INSTPM: 0x00000000
FADDR: 0x00023000
FAULT_REG: 0x00000000
SYNC_0: 0x000061e4
SYNC_1: 0x000061e2
seqno: 0x00000000
ring->head: 0x00000000
ring->tail: 0x00000000
Active [22]:
0307e000 16384 0048 0000 000061e3 dirty purgeable blt snooped (LLC)
017a2000 65536 0002 0000 000061e4 X dirty blt snooped (LLC)
0308e000 16384 0048 0000 000061e5 dirty purgeable render snooped (LLC)
03086000 16384 0050 0000 000061e5 dirty purgeable render snooped (LLC)
03092000 16384 0060 0000 000061e5 dirty purgeable render snooped (LLC)
0308a000 16384 0048 0000 000061e7 dirty purgeable blt snooped (LLC)
0241a000 5242880 0002 0000 000061e7 X dirty blt snooped (LLC)
0309e000 16384 0048 0000 000061e9 dirty purgeable render snooped (LLC)
03096000 16384 0050 0000 000061e9 dirty purgeable render snooped (LLC)
0178c000 4096 0011 0000 000061e9 render snooped (LLC)
01468000 4096 0011 0000 000061e9 dirty render snooped (LLC)
01469000 28672 0011 0000 000061e9 render snooped (LLC)
01470000 4096 0011 0000 000061e9 render snooped (LLC)
01471000 4096 0011 0000 000061e9 render snooped (LLC)
01472000 4096 0005 0000 000061e9 dirty render snooped (LLC)
0147d000 4096 0011 0000 000061e9 dirty render snooped (LLC)
0309a000 16384 0060 0000 000061e9 dirty purgeable render snooped (LLC)
02ac2000 1048576 0006 0000 000061e9 X dirty render snooped (LLC)
02abb000 4096 0006 0000 000061e9 dirty render snooped (LLC)
030a6000 16384 0048 0000 000061eb dirty purgeable blt snooped (LLC)
01d01000 5242880 0002 0000 000061eb X dirty blt snooped (LLC)
0092e000 10485760 0002 0000 000061ec P X dirty blt uncached (fence: 0)
Pinned [9]:
00000000 4096 0001 0001 00000000 P snooped (LLC)
00001000 131072 0001 0001 00000000 P snooped (LLC)
00021000 4096 0001 0001 00000000 P snooped (LLC)
00022000 4096 0001 0001 00000000 P snooped (LLC)
00023000 131072 0001 0001 00000000 P snooped (LLC)
00043000 4096 0001 0001 00000000 P snooped (LLC)
00044000 131072 0001 0001 00000000 P snooped (LLC)
00064000 9216000 0041 0000 00000000 P uncached
01332000 16384 0040 0040 00000000 P dirty uncached
render ring --- gtt_offset = 0x0308e000
[....]
Pipe [0]:
CONF: c0000000
SRC: 077f04af
HTOTAL: 081f077f
HBLANK: 081f077f
HSYNC: 07cf07af
VTOTAL: 04d204af
VBLANK: 04d204af
VSYNC: 04b804b2
Plane [0]:
CNTR: d8004400
STRIDE: 00001e00
SIZE: 00000000
POS: 00000000
ADDR: 00000000
SURF: 0092e000
TILEOFF: 00000000
Cursor [0]:
CNTR: 04000027
POS: 029904b1
BASE: 01332000
Pipe [1]:
CONF: 00000000
SRC: 00000000
HTOTAL: 00000000
HBLANK: 00000000
HSYNC: 00000000
VTOTAL: 00000000
VBLANK: 00000000
VSYNC: 00000000
Plane [1]:
CNTR: 00004000
STRIDE: 00000000
SIZE: 00000000
POS: 00000000
ADDR: 00000000
SURF: 00000000
TILEOFF: 00000000
Cursor [1]:
CNTR: 00000000
POS: 00000000
BASE: 00000000
-------------- next part --------------
hostb0 at pci0:0:0:0: class=0x060000 card=0x50001458 chip=0x01508086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ivy Bridge DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0 at pci0:0:2:0: class=0x030000 card=0xd0001458 chip=0x01528086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ivy Bridge Graphics Controller'
class = display
subclass = VGA
bar [10] = type Memory, range 64, base 0xf7800000, size 4194304, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xe0000000, size 268435456, enabled
bar [20] = type I/O Port, range 32, base 0xf000, size 64, enabled
xhci0 at pci0:0:20:0: class=0x0c0330 card=0x50071458 chip=0x1e318086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB xHCI Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xf7e00000, size 65536, enabled
none0 at pci0:0:22:0: class=0x078000 card=0x1c3a1458 chip=0x1e3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point MEI Controller'
class = simple comms
bar [10] = type Memory, range 64, base 0xf7e1a000, size 16, enabled
ehci0 at pci0:0:26:0: class=0x0c0320 card=0x50061458 chip=0x1e2d8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xf7e18000, size 1024, enabled
hdac0 at pci0:0:27:0: class=0x040300 card=0xa0141458 chip=0x1e208086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point High Definition Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xf7e10000, size 16384, enabled
pcib1 at pci0:0:28:0: class=0x060400 card=0x50011458 chip=0x1e108086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib2 at pci0:0:28:4: class=0x060400 card=0x50011458 chip=0x1e188086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 5'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:0:28:6: class=0x060401 card=0x50011458 chip=0x244e8086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
ehci1 at pci0:0:29:0: class=0x0c0320 card=0x50061458 chip=0x1e268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xf7e17000, size 1024, enabled
isab0 at pci0:0:31:0: class=0x060100 card=0x50011458 chip=0x1e448086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0 at pci0:0:31:2: class=0x010601 card=0xb0051458 chip=0x1e028086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point 6 port SATA AHCI Controller'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0xf0b0, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xf0a0, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xf090, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xf080, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xf060, size 32, enabled
bar [24] = type Memory, range 32, base 0xf7e16000, size 2048, enabled
none1 at pci0:0:31:3: class=0x0c0500 card=0x50011458 chip=0x1e228086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point SMBus Controller'
class = serial bus
subclass = SMBus
bar [10] = type Memory, range 64, base 0xf7e15000, size 256, enabled
bar [20] = type I/O Port, range 32, base 0xf040, size 32, enabled
alc0 at pci0:2:0:0: class=0x020000 card=0xe0001458 chip=0x10831969 rev=0xc0 hdr=0x00
vendor = 'Atheros Communications'
device = 'AR8151 v2.0 Gigabit Ethernet'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xf7d00000, size 262144, enabled
bar [18] = type I/O Port, range 32, base 0xe000, size 128, enabled
pcib4 at pci0:3:0:0: class=0x060401 card=0x88921458 chip=0x244e8086 rev=0x41 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
atapci0 at pci0:4:0:0: class=0x018000 card=0x3d17105a chip=0x3d17105a rev=0x02 hdr=0x00
vendor = 'Promise Technology, Inc.'
device = 'PDC40718 (SATA 300 TX4)'
class = mass storage
bar [10] = type I/O Port, range 32, base 0xd100, size 128, enabled
bar [18] = type I/O Port, range 32, base 0xd000, size 256, enabled
bar [1c] = type Memory, range 32, base 0xf7c28000, size 4096, enabled
bar [20] = type Memory, range 32, base 0xf7c00000, size 131072, enabled
More information about the freebsd-x11
mailing list