usb stick not detected under X

[Darryl Yeoh]

Hi Roland/lists,

Sorry for cross-posting this. But I wasn't sure if this is a problem of USB or X11/HAL. I'm
experiencing something odd. Upon entering X, plugging in my usb stick doesn't get
detected. /var/log/messages don't show any related daX devices. It works If I exit X entirely. It
also works in single-mode. Oddly my external usb mouse works in X. Here's some info:

OS:
FreeBSD matrix.bsd.my 7.1-STABLE FreeBSD 7.1-STABLE #0: Fri Jan 30 13:36:16 MYT 2009
root at matrix.bsd.my:/usr/src/sys/i386/compile/INSP_1501  i386

>From /var/log/messages:

Feb  6 10:59:54 matrix kernel: umass0: BBB reset failed, TIMEOUT
Feb  6 11:00:09 matrix kernel: umass0: BBB bulk-in clear stall failed, TIMEOUT
Feb  6 11:00:24 matrix kernel: umass0: BBB bulk-out clear stall failed, TIMEOUT

Complete output of usbdevs -dv

Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00
  uhub0
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00
  uhub1
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00
  uhub2
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00
  uhub3
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00
  uhub4
 port 1 powered
 port 2 powered
Controller /dev/usb5:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), ATI(0x0000), rev 1.00
  uhub5
 port 1 powered
 port 2 powered
 port 3 addr 0 should never happen!
 port 4 powered
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 powered
 port 9 powered
 port 10 powered

pkg_info for xorg-server and hal:

$ pkg_info -c /var/db/pkg/xorg-server*
Information for xorg-server-1.5.3_4,1:

$ pkg_info -c /var/db/pkg/hal*
Information for hal-0.5.11_17:

/etc/rc.conf:
moused_enable="NO"
dbus_enable="YES"
hald_enable="YES"

Let me know if you need anything else.

Darryl