Atheros 9285 issue
Adrian Chadd
adrian.chadd at gmail.com
Wed Mar 22 18:55:13 UTC 2017
hiya,
That is HAL_ESELFTEST. That means that the NIC failed to self-test.
CAn you compile up tools/tools/ath/athregs and run athregs -i wlan0
when this happens?
Thanks,
-adrian
On 22 March 2017 at 03:36, Luciano Mannucci <luciano at vespaperitivo.it> wrote:
>
> Hello to everybody,
>
> I've recently installed Freebsd 10.3 RELEASE (11.o doesn't boot) on my
> laptop that was running OpenSuSE Leap 42.2. Everything seems quite
> good but the WiFi. After some 24/36 hours it hangs, and I found no way
> to reset it without rebooting. I know I can live with that, but is it
> normal?
>
> dmesg reports a lot of:
> ath0: ath_reset: unable to reset hardware; hal status 14
> ath0: ath_reset: unable to reset hardware; hal status 14
> ath0: ath_chan_set: unable to reset channel 1 (2412 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 6 (2437 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 11 (2462 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 7 (2442 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 13 (2472 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 2 (2417 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 3 (2422 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 4 (2427 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 5 (2432 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 8 (2447 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 9 (2452 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 10 (2457 MHz, flags 0x480), hal status 14
> ath0: ath_chan_set: unable to reset channel 12 (2467 MHz, flags 0x480), hal status 14
> ath0: device timeout
> ath0: ath_reset: unable to reset hardware; hal status 14
> ath0: ath_reset: unable to reset hardware; hal status 14
>
> and ifconfig says "no carrier"...
>
> Cheers to all,
>
> Luciano.
> --
> /"\ /Via A. Salaino, 7 - 20144 Milano (Italy)
> \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250
> X AGAINST HTML MAIL / E-MAIL: posthamster at sublink.sublink.ORG
> / \ AND POSTINGS / WWW: http://www.lesassaie.IT/
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
More information about the freebsd-wireless
mailing list