[Bug 194336] AR9300 pci wireless card not working

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=194336

--- Comment #18 from Chris <chris at tellme3times.com> ---
After applying the 2 patches by  Jung-uk Kim I get the following;

dmesg | grep ath
ath0: <Atheros AR938x> mem 0xfebe0000-0xfebfffff irq 17 at device 0.0 on pci4
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9380 mac 448.3 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
ath0: <Atheros AR938x> mem 0xfebe0000-0xfebfffff irq 17 at device 0.0 on pci4
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ath0: ath_getchannels: unable to collect channel list from hal, status 12
device_attach: ath0 attach returned 22
ath0: <Atheros AR938x> mem 0xfebe0000-0xfebfffff irq 17 at device 0.0 on pci4
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ath0: ath_getchannels: unable to collect channel list from hal, status 12
device_attach: ath0 attach returned 22

-- 
You are receiving this mail because:
You are the assignee for the bug.